Network Topologies
Different types of topologies;
Their advantages & disadvantages
How to choose an appropriate topologies in different situations.
What is a Topology?
“The way in which the connections are made among all the
computers is called the topology of the network”.
Network topology specifically refers to the physical layout of
the network, specially the location of the computers and how
the cable is run between them.
The most common topologies are
Bus
Star
Ring
Mesh.
Bus Topology
The bus topology is the simplest and most common.
It is often used when a network installation is small,
simple, or temporary.
It is a Passive topology. This means that computers on
the bus only listen for data being sent, they are not
responsible for moving the data from one computer to the
next.
BUS Topology
Computer Computer Computer
Computer Computer Computer
Bus Topology
In an active topology network, the computers regenerate
signals and are responsible for moving the data through
the network.
On a bus network, all the computer are connected to a
single cable.
When one computer sends a signal using the cable, all the
computers on the network receive the information, but
only one (Addressee) accepts it. The rest disregard the
message.
Advantages of Bus
The bus is simple, reliable in very small network, and
easy to use.
The bus requires the least amount of cable to connect the
computers together and is therefore less expensive than
other cabling arrangements.
Failure of one node does not affect the rest of network.
Disadvantages of Bus
Heavy network traffic can slow a bus considerably.
A break in the cable or lake of proper termination can
bring the network down.
It is difficult to troubleshoot a bus.
Appropriateness
The network is small
The network will not be frequently reconfigured
The least expensive solution is required
The network is not expected to grow much
Star Topology
In a star topology, each device has a dedicated point to point
link only to central controller, usually called a
hub/server/host.
Each computer on a star network communicates with a central
hub that resends the message appropriate computer(s)
The hub can be active or passive.
An active hub regenerate the electrical signal and sends it to
all the computers connected to it.
Star Topology
This type of hub is often called a multiport repeater.
Active hub require electrical power to run.
A passive hub, such as wiring panels, merely acts as a
connection point and does not amplify or regenerate the
signal.
Passive hubs do not require electrical power to run.
Star Topology
Server
Hub
Computer
Computer
Computer
Computer
Advantages of Star Topology
It is easy to modify and add new computers to a star network
During adding/deleting a node network can function
normally.
When the capacity of the central hub is exceeded, it can be
replaced with one that has a larger number of ports to plug
lines into.
Provide for centralised monitoring and management of the
network.
Single computer failure do not necessarily bring down the
whole star network.
Disadvantages of Star Topology
If the central hub fails, the whole network fails to operate.
It cost more to cable a star network.
Require dedicated server and NOS
Appropriateness
It must be easy to add or remove client computer.
It must be easy to troubleshoot.
The network is large.
The network is expected to grow in the future.
Ring Topology
In a ring topology, each computer is connected directly to
the next computer in line, forming a circle of cable.
It uses token to pass the information from one computer
to another.
Every computer is connected to the next compute in the
ring, and each retransmit what it receives from the
previous computer.
The message flow around the ring in one direction.
Ring is an active topology.
There is no termination because there is no end to the ring
Ring Topology
Computer
Computer
Computer
Computer Computer
Token Passing
Token passing a method of sending data in a ring topology
A small packet, called the token passed around the ring to each
computer in tern
If a computer has information to send, it modifies the token, adds
address information and the data and sends it down the ring.
The information travels around the ring until it either reaches its
destination or returns to the sender.
A token can circle a ring 200 meters in diameter at about 10,000 times
a second.
Advantages of Ring Topology
All the computers have equal access to the network.
Even with many users, network performance is even
Allows error checking, and acknowledgement.
Disadvantages of Ring Topology
Failure of one computer can affect the whole network.
It is difficult to troubleshoot the ring network.
Adding or removing computers disturbs the network.
Appropriateness
The network must operate reasonably under a heavy load
A higher-speed network is required.
The network will not be frequently reconfigured.
Mesh Topology
In a mesh topology, every devices has a dedicated point to
point link to every other device.
A fully connected mesh network therefore has n(n-1)/2
physical channels to link n devices.
To accommodate that many links, every device on the
network must have n-1 input/output ports.
Mesh Topology
C o m p u te r
C o m p u te r C o m p u te r
C o m p u te r
C o m p u te r
Advantages of Mesh Topology
Because of the dedicated link, no traffic between
computers.
Failure of one node computer not affect rest of the
network.
Because of the dedicated link privacy and security are
guaranteed
Point to point links make fault identification and fault
isolation easy.
Disadvantages of Mesh Topology
Due to the amount of cabling and number of input output
ports, it is expensive.
Large space is require to run the cables.
Large space is require to run the cables.
Tree Topology integrated multiple star topologies together onto bus. In
its design only HUB / Switch device connect directly to the tree. A tree
topology combines characteristics of linear bus and star topologies. It
consists of groups of star-configured workstations connected to a linear
bus backbone cable. Tree topologies allow for the expansion of an
existing network, and enable schools to configure a network to meet
their needs.
1.Point-to-point wiring for individual
segments.
2.Supported by several hardware and
software venders.
Disadvantages of a Tree
Topology
1. Overall length of each segment is
limited by the type of cabling used.
2. If the backbone line breaks, the
entire segment goes down.
3. More difficult to configure and wire
than other topologies.
Variations of the Major Topologies
Hybrid Topologies
Often a network combines several topologies as subnetworks linked
together is a large topology.
For instance one department of business may have decided to use a
bus topology while another department has a ring.
The two can be connected to each other a central controller in a star
topology
When two or more topologies are connected together it forms a
hybrid topology
Variations of the Major Topologies
Hybrid Star
A star network can be extended by placing another star hub where a
computer might otherwise go, allowing several more computers or
hubs to be connected to that hub.
Variations of the Major Topologies
Star Bus
The star bus topology combine the bus and the star, linking several
star hubs together with bus trunks. If one computer fails, the hub
can detect the fault and isolate the computer.
If a hub fails, computers connected to it will not be able to
communicate, and the bus network will be broken into two segments
that can not reach each other.
With the hybrid topology are combination of two or more topologies
from a complete Network for example the hybrid topology could be
the combination of star and bus topology. If a computer fail. It will not
affect the rest of the network.
Hybrid
Hub Hub Hub
Computer Computer
Computer
Computer
Computer Computer
Computer
Computer
Computer Computer
Physical Topology Common Cable Common Protocol
Twisted Pair
Linear Bus Coaxial Ethernet
Fiber Local Talk
Ethernet
Star Twisted Pair Local
Fiber Talk
T
Star-Wired Ring Twisted Pair Token Ring
Twisted Pair
Tree Coaxial Ethernet
Fiber
