Physics 01-Introduction and Kinematics (2018) Lab
Physics 01-Introduction and Kinematics (2018) Lab
Physics
Unit 1
Chapters 1 - 3
Credits
• This Slideshow was developed to accompany the textbook
• OpenStax Physics
• Available for free at https://openstaxcollege.org/textbooks/college-physics
• By OpenStax College and Rice University
• 2013 edition
• Some examples and diagrams are taken from the OpenStax Physics and Cutnell &
Johnson Physics 6th ed.
Slides created by
Richard Wright, Andrews Academy
[email protected]
01-01 Introduction, Units, and Uncertainty
In this lesson you will…
• Explain the difference between a principle and a law.
• Explain the difference between a model and a theory.
• Perform unit conversions both in the SI and English units.
• Explain the most common prefixes in the SI units and be
able to write them in scientific notation.
• Determine the appropriate number of significant figures in
both addition and subtraction, as well as multiplication and
division calculations.
• Calculate the percent uncertainty of a measurement.
01-01 Introduction, Units, and Uncertainty
• Physics is the study of the rules (usually stated mathematically) by which the
physical world operates.
• These rules describe “how” things happen. Laws of Nature
• These rules don’t say “why” things happen. Physicists are most interested in
being able to predict what will happen. Many physicists think that because they
can say how things happen, they have answered the why.
• Why does gravity pull things together? Newton described the effects over 100
years before anyone asked why gravity happened. Einstein suggested that mass
bends space-time, but that is just a model.
• Physics deals with “how”. “Why” is philosophy.
01-01 Introduction, Units, and Uncertainty
• I believe God created the laws of physics.
• Since He made the laws, He can stop the effects of those laws when He chooses.
This is called a miracle.
• Many scientists think that because they can describe nature so well without
using God that it proves God does not exist.
• I believe being able to describe these intricate, interrelated laws shows the
wisdom and might of God. It allows for miracles.
• God’s laws of nature don’t change, neither do His other laws like, “Treat other
how you would like to be treated” or the 10 Commandments. Following His
laws makes everything work better.
01-01 Introduction, Units, and Uncertainty
• Model, Theory, Law
• Model
• A representation of something that is often too difficult (or impossible) to display
directly.
• It is only accurate under limited situations.
• Theory
• an explanation for patterns in nature that is supported by scientific evidence and
verified multiple times by various groups of researchers.
• Law
• Uses concise language to describe a generalized pattern in nature that is supported
by scientific evidence and repeated experiments.
• Often, a law can be expressed in the form of a single mathematical equation.
01-01 Introduction, Units, and Uncertainty
• Scientific Method
• Convert 20 Gm to m
01-01 Introduction, Units, and Uncertainty
• Convert 5 cg to kg
01-01 Introduction, Units, and Uncertainty
• Convert 25 km/h to m/s
01-01 Introduction, Units, and Uncertainty
• Accuracy is how close a measurement is to the correct value for
that measurement.
• Precision of a measurement system is refers to how close the
agreement is between repeated measurements.
01-01 Introduction, Units, and Uncertainty
• Multiplication or division
• The result should have the same number of significant figures as the quantity
having the least significant figures entering into the calculation.
1. What unit are the smallest marks on the metric side of the 8. Calculate the percent error using
ruler/meter stick?
2. If you are measuring in cm, how many decimal places can you
measure including the estimate between the smallest marks?
The percent error should be less than 5%.
01-02 Displacement and Vectors
• Kinematics studies motion • Position is relative to a
without thinking about its reference frame
cause • Earth is the most common
reference frame, but it could
• Position be something else
• The location where • Most common coordinate
something is relative to a system is x-y coordinate system
coordinate system called a
frame of reference
01-02 Displacement and Vectors
• Displacement
• Change in position relative to a
reference frame
• Vector
• Has direction and magnitude
• Path does not matter
• Only depends on final and initial
position
01-02 Displacement and Vectors
• What is the displacement of the
path in the diagram?
01-02 Displacement and Vectors
• Distance
• Total length of the path taken
• Scalar
• Only has magnitude
01-02 Displacement and Vectors
• You drive 20 km east, then turn around and drive 15 km west. What
is your displacement?
• Often is 0, so
01-03 Velocity and Graphs
• The
slope of a position vs time
graph is the velocity
• Velocity is rate of change of
position
1.7
01-03 Velocity and Graphs
• 27. (a) Sketch a graph of
velocity versus time
corresponding to the graph of
displacement versus time given
in the graph. (b) Identify the
time or times (ta, tb, tc, etc.) at
which the instantaneous
velocity is greatest. (c) At which
times is it zero? (d) At which
times is it negative?
01-03 Velocity and Graphs
•• The
spine-tailed swift is the fastest bird in powered flight. On one flight a particular
bird flies 306 m east, then turns around and flies 406.5 m back west. This flight takes
15 s. What is the bird’s average velocity?
• Which of these would we use to say how fast the bird is?
• Average speed
01-03 Homework
• Time is important, work
efficiently
• Vector
• Unit:
• If the acceleration is same direction as motion, then the
object is increasing speed.
• If the acceleration is opposite direction as motion, then the
object is decreasing speed.
01-04 Acceleration and Graphs
• Constant acceleration
• The graph of position–time is
parabolic
• ( is quadratic)
• The graph of velocity–time is
linear
• ( is linear)
01-04 Acceleration and Graphs
•A
dropped object near the earth will accelerate downward at 9.8 m/s 2.
(Use -9.8 m/s2.) If the initial velocity is 1 m/s downward, what will be
it’s velocity at the end of 3 s? Is it speeding up or slowing down?
• Read 2.5-2.6
01-05 Equations for One-Dimensional Motion
with Constant Acceleration
In this lesson you will…
• Calculate displacement of an object that is not accelerating, given
initial position and velocity.
• Calculate final velocity of an accelerating object, given initial
velocity, acceleration, and time.
• Calculate displacement and final position of an accelerating object,
given initial position, initial velocity, time, and
acceleration.
• Apply problem-solving steps and strategies to solve problems of
one-dimensional kinematics.
• Apply strategies to determine whether or not the result of a
problem is reasonable, and if not, determine the cause.
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•• Complete
the lab on your worksheet
• and
• and
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•
•
•
•
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•
•
•
•
•
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
• Examine the situation to determine which physical principles are involved.
• Maybe draw a picture
• Make a list of what is given or can be inferred from the problem.
• Identify exactly what needs to be determined in the problem.
• Find an equation or set of equations that can help you solve the problem.
• Substitute the knowns along with their units into the appropriate
equation, and Solve
• Check the answer to see if it is reasonable: Does it make sense?
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
• A plane starting from rest accelerates to in . How far did the plane
travel during this time?
•
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
• To avoid an accident, a car decelerates at for and covers of road.
What was the car’s initial velocity?
• ,,,,
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•• A cheetah is walking at 1.0 m/s when it sees a zebra 25 m away.
What acceleration would be required to reach 20.0 m/s in that
distance?
01-05 Equations for One-Dimensional Motion with
Constant Acceleration
•• The
left ventricle of the heart accelerates •
blood from rest to a velocity of +26 cm/s.
(a) If the displacement of the blood during
the acceleration is +2.0 cm, determine its
acceleration (in cm/s2). (b) How much
time does blood take to reach its final
velocity?
01-05 homework
• Practice problem solving by
solving problems
• Read 2.7
01-06 Falling Objects
In this lesson you will…
• Describe the effects of gravity on objects in motion.
• Describe the motion of objects that are in free fall.
• Calculate the position and velocity of objects in free fall.
01-06 Falling Objects
• Complete
the lab on your •1. Use to find the average
worksheet velocity.
2. Find the final speed of the
• We have already learned that marble.
3. So calculate the acceleration
• If the initial velocity is 0 and the of the marble.
acceleration is constant, then
• Also
01-06 Falling Objects
• Free fall is when an object is
moving only under the
influence of gravity
• In a vacuum all objects fall at
same acceleration
•
01-06 Falling Objects
• How long does it take to hit the ground?
•
01-06 Falling Objects
• A baseball is hit straight up into the air. If the initial velocity was 20
m/s, how high will the ball go?
01-06 Falling Objects
• How
long will it be until the catcher catches the ball at the same height it was
hit?
• or
•
•
01-06 Falling Objects
• How fast is it going when catcher catches it?
• so
01-06 Homework
• “I’m falling for you…”
• Read 3.1-3.3
01-07 Two-Dimensional Vectors
In this lesson you will…
• Observe that motion in two dimensions consists of horizontal and
vertical components.
• Understand the independence of horizontal and vertical vectors in two-
dimensional motion. • Understand the rules of vector addition,
subtraction, and multiplication.
• Apply graphical methods of vector addition and subtraction to
determine the displacement of moving objects. • Understand the rules of
vector addition and subtraction using analytical methods.
• Apply analytical methods to determine vertical and horizontal
component vectors.
• Apply analytical methods to determine the magnitude and direction of
a resultant vector.
01-07 Two-Dimensional Vectors
Vectors
• Vectors are measurements with
magnitude and direction
• They are represented by
arrows
• The length of the arrow is
the magnitude
• The direction of the arrow is
the direction
01-07 Two-Dimensional Vectors
•• Vectors
can be represented in component form
• Make a right triangle using the vector as the
hypotenuse
• Use sine and cosine to find the horizontal
(x) component and the vertical (y)
component
• Assign negative signs to any component
going down or left
01-07 Two-Dimensional Vectors
•• A
football player kicks a ball at 15 m/s at 30°
above the ground. Find the horizontal and vertical
components of this velocity.
• Horizontal:
• Vertical:
01-07 Two-Dimensional Vectors
Scalar Multiplication
• Multiplying a vector by a single
number
• Draw the vector that many times
in a line
• Or multiply the components by
that number
• A negative vector means multiply
by -1, so it goes in the opposite
direction
01-07 Two-Dimensional Vectors
Vector Addition - Graphical Method
• Draw the first vector.
• Draw the second vector where
the first one ends (tip-to-tail).
• Draw the resultant vector from
where the first vector begins to
where the second vector ends.
• Measure the resultant's length
and direction.
01-07 Two-Dimensional Vectors
•• Add
the following vectors graphically.
at 45° N of E, at 45° W of N.
01-07 Two-Dimensional Vectors
Vector Addition – Component Method 3. Add all the y-components
• Vectors can be described by its components to show 4. Use the Pythagorean Theorem to find the
how far it goes in the x and y directions. magnitude of the resultant
• To add vectors, you simply add the x-component and 5. Use tan-1 to find the direction (the direction is
y-components to get total (resultant) x and y always found at the tail-end of the resultant)
components.
• Note: Drawing pictures and triangles helps immensely.
1. Find the components for all the vectors to be
added
2. Add all the x-components
01-07 Two-Dimensional Vectors
•Add
the follow vectors. x y
at 25° N of E; C
at 60° S of E
D
C D
R
01-07 Two-Dimensional Vectors
A jogger runs 145 m in a x y
direction 20.0° east of north and A
then 105 m in a direction 35.0°
south of east. Determine the B
magnitude and direction of
jogger's position from her R
starting point.
B
A
R
01-07 Homework
• Let’s add some arrows
• Read 3.4
01-08 Projectile Motion
In this lesson you will…
• Identify and explain the properties of a projectile, such as
acceleration due to gravity, range, maximum height, and
trajectory.
• Determine the location and velocity of a projectile at
different points in its trajectory.
• Apply the principle of independence of motion to solve
projectile motion problems.
01-08 Projectile Motion
• Complete the lab on your worksheet.
• y-motion only
01-08 Projectile Motion
•• What
was the velocity when it hit? •• x-direction
• Both x and y motion
• x: • y-direction
• y:
𝑚
6.7 𝑎𝑡 42° 𝑏𝑒𝑙𝑜𝑤 h𝑜𝑟𝑖𝑧𝑜𝑛𝑡𝑎𝑙
𝑠
01-08 Projectile Motion
•• A truck (v = 11.2 m/s) turned a • y-direction:
corner too sharp and lost part of the
load. A falling box will break if it
hits the ground with a velocity
greater than 15 m/s. The height of
the truck bed is 1.5 m. Will the box
break?
• x: • The box doesn’t break
• y:
01-08 Projectile Motion
• While driving down a road a bad guy shoots a bullet straight up into
the air. If there was no air resistance where would the bullet land –
in front, behind, or on him?