Scribd
Upload
84 views9 pages

Embedded Firmware Design and Development

The document discusses two approaches to embedded firmware design: the super loop based approach and the embedded OS based approach. The super loop based approach involves executing tasks in an infinite loop without OS overhead but lacks real-time response. The embedded OS approach uses an RTOS to provide real-time response but with added complexity. The document also discusses assembly language and C/C++ as common languages for embedded firmware development.

Uploaded by

Megha Shree
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
84 views9 pages

Embedded Firmware Design and Development

The document discusses two approaches to embedded firmware design: the super loop based approach and the embedded OS based approach. The super loop based approach involves executing tasks in an infinite loop without OS overhead but lacks real-time response. The embedded OS approach uses an RTOS to provide real-time response but with added complexity. The document also discusses assembly language and C/C++ as common languages for embedded firmware development.

Uploaded by

Megha Shree
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Embedded Firmware Design and

Development
Embedded Firmware Design Approaches

 The Super Loop Based Approach


• This approach is adopted for applications that
are not time critical and where the response
time is not so important.
• It is very similar to conventional procedural
programming where the code is executed task
by task.
 Firmware execution flow will be
 Since the tasks are running inside an infinite
loop , the only way to come out of the loop is
either a hardware reset or an interrupt
assertion.
 This approach is simple and straight forward
without any OS related overheads.
 Drawbacks
 Any failure in any part of a single task may
affect the total system.
 Lack of real timliness.
The Embedded OS Based Approach
 This approach contains operating systems ,
which can be either a GPOS or a RTOS to host
the user written application firmware.
 The GPOS based design is very similar to
conventional PC based application
development.
 RTOs based approach is employed in embedded
products demanding real-time response.
Embedded Firmware Development
Languages
 Assembly Language based Development
 Assembly language programming is the task of writing
processor specific machine code in mnemonic form
,converting the mnemonics into actual instructions(machine
language) and associated data using an assembler.
 Each line of an assembly language is split into four fields as
given below
LABEL OPCODE OPERANDS ; COMMENTS

optional mandatory
• Opcodes
– reserved symbols that correspond to LC-3 instructions
– listed in Appendix A
• ex: ADD, AND, LD, LDR, …
• Operands
– registers -- specified by Rn, where n is the register number
– numbers -- indicated by # (decimal) or x (hex)
– label -- symbolic name of memory location
– separated by comma
– number, order, and type correspond to instruction format
• ex:
ADD R1,R1,R3
ADD R1,R1,#3
LD R6,NUMBER
BRz LOOP
• Label
– placed at the beginning of the line
– assigns a symbolic name to the address corresponding to line
• ex:
LOOP ADD R1,R1,#-1
BRp LOOP
• Comment
– anything after a semicolon is a comment
– ignored by assembler
– used by humans to document/understand programs
– tips for useful comments:
• avoid restating the obvious, as “decrement R1”
• provide additional insight, as in “accumulate product in R6”
• use comments to separate pieces of program

You might also like