Stone Columns Presentation

STONE COLUMNS
AFIFA SIDIQ
20902213
Submitted To Dr Rajeev
Kumar
Civil Engineering Department NITJ
April30, 2021
Stone columns 1 / 21
Overview
1. Introduction
 Stone Columns and its basic functions
 Background
 Applicable soil types and Effectiveness of stone columns
2. Stone Column construction techniques

 Vibroflotation
 Rammed stone column technique
3. Basic Design Parameters
4. Failure mechanisms of stone columns
5. Advantages of stone columns
6. Applications of stone columns
7. Conclusion
8. Bibliography
Stone Columns 2 / 21
INTRODUCTION
• Ground improvement techniques are commonly used at
sites where the existing soil conditions are expected to lead
to a unsatisfactory performance.
• The soil improvement techniques are used to increase
bearing capacity and reduce the settlement of
constructions. Their main advantage lies in improving the
soil properties below a structure and following the reduction
of an irregular settlement.
• TECHNIQUES FOR SOIL IMPROVEMENT:
1. Vibroflotation
2. Dynamic Compaction
3. Stone Columns
4. Compaction Piles
5. Compaction Grouting
STONE COLUMNS AND ITS BASIC FUNCTIONS
• Stone columns are essentially a method of soil

reinforcement in which soft cohesive soil is replaced at
discrete points by gravel or crushed rock in pre-bored
vertical holes to form ‘columns’ or ‘piles’ within the soil.
• Stone column consists of crushed coarse aggregates or
gravel of various sizes (6-40mm).
• The stone columns serve two basic functions:
1. Providing strength reinforcement to the soil.
2. Acting as vertical drains to allow subsoil consolidation
to occur quickly under any given loading.
BACKGROUND
• The concept was first applied in France in 1830 to improve

a native soil.
• This method has been used extensively in Europe for site
improvement since the late 1950's.
• In India, it was first introduced for construction in 1970s.
• In England, stone columns have been used to support
about 40 bridge abutments.
• In Europe, stone columns have been used considerably
more extensively than in either the U.S. or Canada.
APPLICABLE SOIL TYPES AND EFFECTIVENESS OF
STONE COLUMNS
1. Soft, Non-compactible, Weak soil
2. Granular with high fines content
3. Organic soils
4. Marine/ Alluvial clays
5. Liquefiable soils
6. Cohesive soils
STONE COLUMN CONSTRUCTION TECHNIQUES
 Displacement method
• Vibratory technique using vibroflot
 Non-Displacement method
• Rammed stone column technique
VIBROFLOTATION
Mechanism of Vibroflot
RAMMED STONE COLUMN TECHNIQUE
Rammed Stone Column
BASIC DESIGN PARAMETERS
1. Stone column diameter, D

2. Depth of stone column
3. Pattern
4. Spacing
5. Equivalent diameter
6. Area Replacement ratio, as
7. Stress concentration factor, n

Stone Columns 10 /
BASIC DESIGN PARAMETERS
• The column spacing may broadly range from 2m to 3m depending
upon the site condition , loading pattern , column factors , the
installation technique , settlement tolerances.
• The equivalent diameter (De) is given by the following formula:
De = 1.05 S for an equilateral triangular pattern, and
= 1.13 S for a square pattern
• Replacement ratio (as) is given by:
as = As / A = As / (As + Ag)
as = c1(D/S)2
• c1 = a constant; for a square pattern c1=π /4 and for an equilateral
triangular pattern c1=0.907.
• The stress concentration factor, n, due to externally applied load σ, is
defined as the ratio of average stress in the stone column, σs, to the
stress, σg ,in the soil within the unit cell,
n = σs/ σg
• The value of n generally lie between 2.5 and 5 at the ground surface.
Stone Columns 11 /
FIGURE
Triangular arrangement of stone columns
Stone Columns 12 /
FIGURE
Square arrangement of stone columns

Stone Columns 13 /
FAILURE MECHANISMS OF STONE COLUMNS
• Failure Mechanisms of a Single Stone Column in
Homogenous Soft Layer:
a) Long stone column with firm or floating support-Bulging
failure
b) Short column with rigid base- shear failure
c) Short floating column- punching failure
Stone Columns 14 /
ADVANTAGES OF STONE COLUMNS
• The stone column technique of ground treatment has proven
successful in
1. improving slope stability of both embankments and natural
slopes,
2. increasing bearing capacity of in-situ soils ,
3. reducing total and differential settlements,
4. reducing the liquefaction potential of sands,
5. increasing the time rate of settlement,
6. expedites consolidation settlement,
7. more economical than piling,
8. homogenizes variable soil properties, and
9. improves the stiffness of subsoil to decrease settlements.
• Stone columns are used to support structures overlying both very
soft to firm cohesive soils and also loose silty sands having greater
than about 15 percent fines.
Stone Columns 15 /
APPLICATIONS OF STONE COLUMNS
• Stone columns have the following applications:

1. Potential highway uses- highway embankments, bridge approach
fills, bridge abutments.
2. Footings - raft / isolated.
3. Tanks - LNG storage tank, water storage tank(foundation of

tanks).

4. Railway embankments.
5. Wharf structures.
6. Reinforced Earth Retaining walls.
Stone Columns 16 /
CONCLUSION
• Stone Columns are one of the most versatile techniques for
engineering the ground.
• The primary purpose of stone columns is to improve the

settlement characteristics of the soil, increase load bearing
capacity, shear strength, slope stability, time rate of settlement and
reducing liquefaction potential.
• Stone columns act as drains helping to prevent a build-up in

pore-water pressure in cohesion-less soils during an earthquake.
• The installation of stone columns is more of an art than an exact

science; therefore it requires careful field control and experienced
engineers and contractors
Stone Columns 17 /
BIBLIOGRAPHY
I. IS 15284 (part- I): 2003, “Design & Construction for ground

improvement - Guidelines”.
II. “Theory & Practice of foundation design” by N.N. Som & S.C.
Das.
III. “Foundation analysis and design” (5th edition) by Joseph E.

Bowles.
IV. “Design and Construction of Stone Columns (Volume I)” by

R.D. Barksdale and R.C. Bachus.
V. “Foundation design principles and practices” by Donald P.

Coduto.
Stone Columns 18 /
The End
Stone Columns 19 /

Stone Columns Presentation

Uploaded by

Copyright:

Available Formats

Stone Columns Presentation

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Stone Columns Presentation

Uploaded by

Copyright:

Available Formats

STONE COLUMNS

Civil Engineering Department NITJ

2. Stone Column construction techniques

• Stone columns are essentially a method of soil

• The concept was first applied in France in 1830 to improve

Rammed Stone Column

1. Stone column diameter, D

Triangular arrangement of stone columns

Square arrangement of stone columns

• Stone columns have the following applications:

2. Footings - raft / isolated.

3. Tanks - LNG storage tank, water storage tank(foundation of

6. Reinforced Earth Retaining walls.

• The primary purpose of stone columns is to improve the

• Stone columns act as drains helping to prevent a build-up in

• The installation of stone columns is more of an art than an exact

I. IS 15284 (part- I): 2003, “Design & Construction for ground

III. “Foundation analysis and design” (5th edition) by Joseph E.

IV. “Design and Construction of Stone Columns (Volume I)” by

V. “Foundation design principles and practices” by Donald P.

You might also like