2
2
Ans: 84.3 N
5. Determine the resultant moment produced by forces and about
point O. Express the result as a Cartesian vector.
Ans: -720i + 720j N–m
6. The pipe assembly is subjected to the 80-N force. Determine
the moment of this force about point B.
Ans: Bx=424N ;
Ay=319N ;
By=405N;
13. The member shown in Fig is pin-connected at A and rests against a smooth
support at B. Determine the horizontal and vertical components of reaction at
the pin A.
Ans: Ax=100N ;
Ay=233N ;
By=200N;
14. Determine the support reactions on the member in Fig. The collar at A is
fixed to the member and can slide vertically along the vertical shaft.
Ans: Ax=0N ;
Ma= -1486N.m ;
By=900N;
15. The air stroke actuator at D is used to apply a force of F = 200 N on the
member at B. Determine the horizontal and vertical components of reaction at
the pin A and the force of the smooth shaft at C on the member.
Ans: Cx=213N ;
Ay=118N ;
Ax=105N;
16. Determine the horizontal and vertical components of reaction at the pin A
and the reaction of the smooth collar B on the rod.
Ans: Bx=825N ;
Ay=750N ;
Ax=825N;
17. Determine the support reactions of roller A and the collar B on the rod.
The collar is fixed to the rod AB, but is allowed to slide along rod CD.
Ans: B =1.27kN ;
Ax=900N ;
Mb=227N.m;
18. If spring BC is unstretched with and the bell crank achieves its equilibrium position
when , determine the force F applied perpendicular to segment AD and the horizontal
and vertical components of reaction at pin A. Spring BC remains in the horizontal
position at all times due to the roller at C.
Ans: F =50.6N ;
Ay=108.44N ;
Ax=48.84N;
19. Determine the horizontal and vertical components of reaction at the pin A
and the normal force at the smooth peg B on the member
Ans: B =1.04kN ;
Ay=600N ;
Ax=0N;
20. The boom is used to support the 75-lb flowerpot in Fig and is held by a
ball and socket support at O. Determine the tension developed in wires AB
and AC and reactions at O.
Ans: Fab=Fac=87.5N
21. A 5 * 8-ft sign of uniform density weighs 270 lb and is supported by a
ball-and-socket joint at A and by two cables. Determine the tension in each
cable and the reaction at A.