Scribd
Upload
575 views18 pages

"Final Year Ece Projects in Chennai, Bangalore, Vijayawada, Kakinada." Good

The document describes a proposed final year project to design an automatic baby cradle. The cradle will detect a baby's cry using a microphone and video analysis system. It will then automatically swing the cradle to soothe the baby. Sensors will also monitor the baby's temperature, respiration, and whether the mattress is wet. The system will alert parents by message or call if the baby does not stop crying within a set time. Parents can control the cradle and watch the baby remotely using a mobile phone. The goal is to help parents care for babies without constant physical attention.

Uploaded by

wondi BET
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
575 views18 pages

"Final Year Ece Projects in Chennai, Bangalore, Vijayawada, Kakinada." Good

The document describes a proposed final year project to design an automatic baby cradle. The cradle will detect a baby's cry using a microphone and video analysis system. It will then automatically swing the cradle to soothe the baby. Sensors will also monitor the baby's temperature, respiration, and whether the mattress is wet. The system will alert parents by message or call if the baby does not stop crying within a set time. Parents can control the cradle and watch the baby remotely using a mobile phone. The goal is to help parents care for babies without constant physical attention.

Uploaded by

wondi BET
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

by

www.embeddedinnovationlab.
com

“Final year ece projects in chennai,bangalore,vijayawada,kakinada.”


Good www.embeddedinnovationlab.com
CONTENTS
• Synopsis.
• Introduction.
• Design Aims
• Literature Survey
• Block Diagram.
• Components.
• Pin Diagram.
• Advantages & Disadvantages.
• Conclusion.
• References.
SYNOPSIS
There is a need to develop a new low cost indigenous electronic cradle
because the existing cradles are imported and costly. “Final year ece
projects in chennai ,bangalore ,vijayawada,kakinada.” This paper
presents the design and implementation of a new indigenous low cost
Baby Cradle that swings automatically when baby cries, for this it has a
mobile phone video analyzing system which detects the baby cry video
with audio and accordingly the cradle swings till the baby stops crying. The
speed of the cradle can be controlled as per the user need. The system has
inbuilt alarm that indicates two conditions – first when the mattress is
wet, which is an important parameter to keep the baby in hygienic
condition, second when baby does not stop crying within a stipulated
time, which in turn intimated that
/www.embeddedinnovationlab.combaby needs attention. / .This system
helps parents and nurses to take care of babies without physical attention.
MODEL

Fig 1: Electronic circuit Board


INTRODUCTION
• Since the evolution of humans , mothers play an important role in taking
care of children. “Final year embedded system projects in chennai
,bangalore,vijayawada,kakinada.”
• But parents in the present world are busy in their professional life.
• The system is designed to help parents and nurses in infants care.
• The project intimates the care takers by sending both alert message as
well as video and audio calls when a baby cries.
• www.embeddedinnovationlab.com
• Parents can control the cradle movement with a keypad press.
• Respiratory sensors and Wet sensors are also used to detect respiratory
rates and wetness respectively.
• Thus this project is a solution, for parents at home who lose sleep over a
baby who constantly wakes up and cries.
Working
• When the baby in the cradle cries, the cry will be detected by the microphone.
• The signals are then amplified by the amplifier then it is sent to the peak
detector where cry peaks will be detected and further the signal is sent to
microcontroller. “Final year mechanical engineering projects in
chennai,bangalore,vijayawada,kakinada”
• Sensors used:
• Wet sensor.
• Temperature sensor.
• Respiration sensor.
• The GSM modem via RS232 interface, the modem will send a message or a call to
the mobile number stored in the modem as an alert.
• www.embeddedinnovationlab.com
• Using the Skype technology can observe the video of the baby.
• Control the Cradle movement.
Design Aims
• When baby cry parent can automatically swings the cradle till the baby
stops crying.
• “Final year mechanical projects in
chennai,bangalore,vijayawada,kakinada”

• Alerts the parent when the mattress gets wet.

• Alert parent by giving temperature as well as respiration rate by of SMS.

• Alerts the parent by giving call or sending SMS.

• The parents can have a video interface and watch their baby LIVE via 3G!
SKYPE TECHNOLOGY.
LITERATURE
SURVEY
• Steven Bang
Steven Bang designed automatic
baby rocker having a noise sensor to
detect baby cry. Noise sensor
consists of Electret MIC with a pre
amplifier (2n3904 transistor). Signal
from noise sensor is fed to
microcontroller which is used to
control the DC motor. “Final year
engineering projects in
bangalore,chennai,vijayawada,kaki
nada.” Few colorful lights made up
of LED are used to entertain the
baby while being rocked.
LITERATURE
SURVEY
• Yang Hu
Yang Hu proposed an algorithm for adjusting
the bassinet swaying extent by the sensor
signals. The bassinet is made up of an
adaptive swaying device and other sensors
network. While baby is crying, the sensors
network can judge the reason according to
detecting parameters, giving the different
signals to control circuit. At the same time,
the bassinet starts to sway slightly. The
swaying rhythm can be adjusted according to
parameters from baby status. [2].
LITERATURE
SURVEY
• Marie R.Harper
Marie R. Harper invented a crib adapted to be rocked
automatically. Once the crib is manually tilted in one
direction and released, this permits the inertia to actuate
the locking and actuating arms to operate under the
biasing force of spring in conjunction with the gear. Thus
spring loaded motor begin to operate and the lever arm
is oscillated in back and forth movement. This provides
the same effect as would be achieved by the mother
rocking the crib containing the baby. Oscillation of crib is
stopped when the slightest resistance is incurred [3].
LITERATURE
SURVEY
• Gim Wong
Gim Wong presented an Electronic
device that can be attached to
conventional pivotally mounted type
crib. Which is actuated by baby cry
voice picked up by the microphone
giving short throw type rocking action
to crib. Very similar to a person
rocking the crib by pushing and
pulling on the foot or headboard .
There is a sensitivity control so that
baby voice only actuate the rocking
action and a timer to controller the
duration of rocking action [4].
LITERATURE
SURVEY
• Chua-Kai-Hsieh
Chua-Kai-Hsieh proposed a baby cry
recognizer which includes an amplifier
circuit for amplifying a received sound
signal. In response to the amplified
sound signal, a pulse generator circuit
generates a pulse signal having zero
crossings which are aligned with zero
crossings of the amplified sound signal.
The pulse signal, in turn, is inputted to
a signal recognition circuit. The signal
recognition circuit outputs a signal
indicating that a baby’s cry was
detected [5].
LITERATURE
SURVEY
• Anritha Ebenezer
Anritha Ebenezer gives an approach to design a
baby cradle consisting of cry analyzing system
which detects baby cry. According to sound
intensity cradle swings. It has six rocks per
minute. It has wet sensor to indicates baby wets,
“www.embeddedinnovationlab.com”whenever
baby wets resistance would change thus sending
a signal. Other sensors include temperature
sensor to display baby temperature, respiratory
sensor that sends a signal in apnea condition.
GSM modem via RS232 is used to send message
to parents in case baby does not stop crying with
in a particular instant of time [6].
BLOCK DIAGRAM
. DISPLAY
BABY WET
SENSOR RELAY
FAN
DRIVER

DTMF GSM
RS232
PIC16F877A
MICROPHONE AMP

TEMPERATURE DRIVER MOTOR CRADLE


SENSOR

RESPIRATION POWER SUPPLY


VIBRATOR
SENSOR
COMPONENTS
Mobile phone
• Mobile phone technology is used to see the video of the baby
from a remote distance using 3G technology by Skype video call.
“Final year mechanical projects in Chennai
,bangalore,vijayawada,kakinada”
• To control the cradle remotely by a parent.

• DTMF
• Operating voltage: 2.5V~5.5V.
• Minimal external components .
• No external filter is required .
• Low standby current (on power down mode) .
• Excellent performance
• 3.58MHz crystal or ceramic resonator .
• 1633Hz can be inhibited by the INH pin.
• HT9170B: 18-pin DIP package.
• HT9170D: 18-pin SOP package
COMPONENTS
• RS232
• Operate from Single +5V Power Supply
(+5V and +12 MAX231/MAX239) .
• Low-Power Receive Mode in Shutdown
(MAX223/MAX242) .
• Multiple Drivers and Receivers .
• 3-State Driver and Receiver Outputs .
• Open-Line Detection (MAX243).
• Level conversion
COMPONENTS
• LCD Display
• The 16 x 2 intelligent alphanumeric dot
matrix display is capable of displaying 224
different characters and symbols.
• Requires a single power supply (+5V).
• “www.embeddedinnovationlab.com”

• Vibrator
• Various machines or devices causing
vibratory motion or action.
• A small appliance of variable shape, made
to oscillate very rapidly and used in
vibratory massage.
Interesting, right?
This is just a sneak preview of the full presentation. We hope you like it!
To see the rest of it, just click here to view it in full on PowerShow.com.
Then, if you’d like, you can also log in to PowerShow.com to download
the entire presentation for free.

You might also like