Geoinformatics Assignment EM

ENVIRONMENT MANAGEMENT
Fundamentals of
Geoinformatics
CHHAVI CHOUDHARY
00416304720
CONCEPTS OF
PHOTOGRAMMETRY
Introduction
The word photogrammetry is defined as the science of

making measurements from photographs.
O As per the American Society for Photogrammetry
and Remote Sensing (1987), photogrammetry is the art,
science, and technology of obtaining reliable
information about physical objects and the environment
by recording, measuring and interpreting photographic
images.
O Human eyes are naturally capable of seeing 3D around
them in the real world, the stereophotogrammetry
technique mimics the same by restoring the 3D
positions and orientations of an overlapping image pair.
With the filtering of anaglyph red-cyan glasses, 3D
glasses or 3D screens, it allows us to see only one
corresponding image out of a two-image pair for each
eye, which lets our brain generate the 3D from the
parallax.
Fundamentals of
photogrammetry

O The fundamental principle used by photogrammetry
is triangulation. By taking photographs from at least
two different locations, so-called “lines of sight” can
be developed from each camera to points on the
object. These lines of sight are mathematically
intersected to produce the 3-dimensional coordinates
of the points of interest.
Parallax
O The displacement of an object caused by a change in the
point of observation is called Parallax. This can be
observed by looking at the same object by closing one eye
and then the another one. Stereoscopic parallax is caused
by taking photographs of the same object but from the
different point of observation. Change in position of an
image from one photo to the next is caused by aircraft’s
motion.
O Parallax of any point is directly related to the elevation of
the point
O Parallax is greater for high points than for low points
Stereoscopic parallax
Stereo Pair
O The three-dimensional view which results when two
overlapping photos (called a stereo pair), are viewed using a
stereoscope. Each photograph of the stereo pair provides a
slightly different view of the same area, which the brain
combines and interprets as a 3-D view.
O The photographs are usually taken by a series of a parallel
passes called flight strip. Photographs are normally exposed
in such a way that the area covered by each successive
photograph along a flight strip duplicates or overlaps part of
the coverage of the previous photograph.
O This lapping along the flight strip is called end lap and the
area of coverage common between two adjacent pairs of
photographs called in a flight strip is called stereoscopic
overlap (end lap).
Types of
photogrammetry
Aerial Photogrammetry
O The camera is mounted in an aircraft and is usually
pointed vertically towards the ground with the camera
axis vertical or nearly so. Many photographs are taken
with the overlapping concept. Later the processing of
these photographs is done using stereo-plotter. These
photos are also used in automated processing for Digital
Elevation Model (DEM) creation.
Terrestrial Photogrammetry

O Photographs are taken from a fixed, and usually known,
position on or near the ground and with the camera axis
horizontal or nearly so. The position and orientation of
the camera are often measured directly at the time of
exposure. The instrument used for exposing such
photograph is called photo theodolite
Space Photogrammetry

O In this branch of photogrammetry, the satellites are used
to take photographs. With the development of modern-day
satellite, a global coverage of satellite imageries is
possible in lesser time with a high-resolution data.
Interpretative Photogrammetry

O Under this process, the images are studied and
identification is done for judging their significance
with systematic and careful analysis.
Metric Photogrammetry
O To know the relative location of a point the
precise measurement is done on the
photographs. Planimetric mapping and
topographical mapping are the best examples of
this.
Aerial Triangulation
O Aerial Triangulation(AT) represents the mathematical
process of establishing precise and accurate
relationships between the individual image coordinate
systems and a defined datum and projection (ground).
O The main objective of aerial triangulation is to produce
from ground control, sufficient points in the
photogrammetric models to ensure that each model can
be oriented accurately as required for stereo compilation
in either orthophoto or line mapping.
There are mainly three stages of aerial triangulation:
Preparation
O Point identification of ground control
O Numbering settings for points, images and strips
O Input data: flight details (photo coordinates plus
omega, phi and kappa rotation), camera calibration
and scanned or digital images
Image Measurement
O Interior orientation (fiducial marks measurement for
analogue cameras)
O Automatic tie points determination using images pyramid
levels
O Ground control points measurement
O Manual tie points measurement if necessary (in cases
where automatic measurement could not determine an
acceptable number of tie points per image or in failure
situations.
Block Adjustment
O The input of observations (x, y, z coordinates or
GPS/IMU, ground control) and initial parameter values.
O Preliminary data processing, including generation of
initial values for bundle adjustment parameters.
O Interactive solution (including specials algorithms for
determination of blunders and error propagation)
O Acceptance of results (after accuracy and reliability
assessment)
O The final output of results (EO data)
Applications of
Photogrammetry
O To classify soil (Forestry/agriculture)
O To prepare a composite picture of ground
O To relocate existing property boundaries
O In the field of medicines and many more
O To determine the space position of ground objects
O To prepare planimetric topographical maps (Surveying/mapping)
O Creation of Digital Terrain Models (DTM)
O For acquisition of military intelligence (Military/artificial
intelligence)
O For the interpretation of geology (Geology/archaeology)
O Assessment of crop damage due to floods or other natural
calamities
Thank you

Geoinformatics Assignment EM

Uploaded by

Copyright:

Available Formats

Geoinformatics Assignment EM

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Geoinformatics Assignment EM

Uploaded by

Copyright:

Available Formats

ENVIRONMENT MANAGEMENT

The word photogrammetry is defined as the science of

You might also like