Scribd
Upload
53 views13 pages

Hybrid Systems ServoSystemExercise

Open modelica tutorial from their website

Uploaded by

Sreerag V N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
53 views13 pages

Hybrid Systems ServoSystemExercise

Open modelica tutorial from their website

Uploaded by

Sreerag V N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 13

Exercises:

Servo System Modeling

Control
Measurements Controller Outputs
Computing

Sensors Actuators

1 Copyright © Open Source Modelica Consortium


Control Theory Perspective
Feedback Control System

Controller Plant
(Physical System)

r (t ) reference (setpoint) error


e (t ) measured process variable (plant output)
y control output variable (plant input)
(t )
u (t )

Usual Objective
Plant output should follow the reference signal.

2 Copyright © Open Source Modelica Consortium


Exercise Goal: Servo System with Controller using
Different Modeling Techniques
Below: Clocked discrete-time controller using sample, hold and clock
blocks from the Modelica_Synchronous library

3 Copyright © Open Source Modelica Consortium


Modeling the Physical System
Basic model of a DC Permanent Magnet (DCPM) machine

4 Copyright © Open Source Modelica Consortium


Exercise A: Physical System Modeling

Goal: Exploring different modeling styles for the


DC Permanent Magnet (DCPM) machine in three
steps:

1. Textual equations wrapped in graphical “block”


component with causal data-flow connectors.
2. Graphical component based model using acausal
connectors.
3. Model for testing and comparing the two components.

5 Copyright © Open Source Modelica Consortium


Exercise A1: Wrap Textual Motor Equations in
Graphical Block Interface

u_A phi

phi_der

tau_L tau_m

block DCPMMotorTextual
extends Modelica.Blocks.Interfaces.BlockIcon;
import SI = Modelica.SIunits;
parameter SI.Resistance R_A = 7.38 "Armature resistance";
parameter SI.Inductance L_A = 4.64e-3 "Armature inductance";
parameter SI.Inertia J_R(min=0) = 1.9e-6 "Armature moment of inertia";
parameter Real k_e(final unit="V.s/rad") = 3.11e-2 “Electromotive force
constant";
parameter SI.ElectricalTorqueConstant k_t = 3.11e-2 "Motor torque constant";
/* TODO: Build the block interface by drag and drop of connectors from package
Modelica.Blocks.Interfaces */
equation
/* TODO: Fill in equations */
end DCPMMotorTextual;

6 Copyright © Open Source Modelica Consortium


Exercise A2: Build a Component Based Model Using
Acausal Connectors

Interface
(optional: Create a nice icon) Internal structure

7 Copyright © Open Source Modelica Consortium


Exercise A3: Build a Model for Testing and Comparing
the two Motor Model Components

8 Copyright © Open Source Modelica Consortium


Exercise B: Design a Controller

Goal: Exploring different modeling styles for


designing a digital controller for the DCPM machine:
1. Continuous-time controller reference design.
2. Digital controller using Modelica 3.2 constructs
(not clocked).
3. Digital controller using Modelica 3.3. clocked
constructs.
4. Closed-loop model for testing and comparing the
different controllers.

9 Copyright © Open Source Modelica Consortium


Exercise B1: Continuous-time Reference Controller

• Take the height of the step as 130. The driving voltage should not
exceed 24V.
• Locate the continuous-time PI controller in the MSL and tune it until
you get satisfactory results.

10 Copyright © Open Source Modelica Consortium


Exercise B2: Model Digital Controller Using
Modelica 3.2 Un-clocked Constructs

u y

Boolean event = sample(0,Ts);


when event then
// TODO: Fill in equations
end when;

11 Copyright © Open Source Modelica Consortium


Exercise B3: Model Digital Controller Using
Modelica 3.3 Clocked Constructs

   

Real Ts = interval(u) "Sample period(periodic or


non-periodic)";
equation
when Clock() then
// TODO: Fill in equations
end when;

12 Copyright © Open Source Modelica Consortium


Exercise B4: Create Model for Testing and Comparing
the Three Model Components

Clocked controller uses sample,


hold and clock blocks from the
Modelica_Synchronous library

13 Copyright © Open Source Modelica Consortium

You might also like