Scribd
Upload
74 views13 pages

Objectives:: The Sampling Theorem

This lecture discusses the sampling theorem and its applications. The key points covered are: (1) A continuous-time signal can be represented as a discrete-time signal using impulse trains if it is sampled at the Nyquist rate, which is at least twice the bandwidth of the signal. (2) The Fourier transform of a sampled signal results in replications of the original spectrum spaced at integer multiples of the sampling frequency. (3) If the sampling frequency meets the Nyquist criterion, the original continuous-time signal can be perfectly reconstructed from the samples. (3) Applications include digital signal processing, analog to digital conversion, resampling, and avoiding aliasing.

Uploaded by

SalmaanCadeXaaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
74 views13 pages

Objectives:: The Sampling Theorem

This lecture discusses the sampling theorem and its applications. The key points covered are: (1) A continuous-time signal can be represented as a discrete-time signal using impulse trains if it is sampled at the Nyquist rate, which is at least twice the bandwidth of the signal. (2) The Fourier transform of a sampled signal results in replications of the original spectrum spaced at integer multiples of the sampling frequency. (3) If the sampling frequency meets the Nyquist criterion, the original continuous-time signal can be perfectly reconstructed from the samples. (3) Applications include digital signal processing, analog to digital conversion, resampling, and avoiding aliasing.

Uploaded by

SalmaanCadeXaaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 13

ECE

EE 8443
3512 – PatternContinuous
– Signals: Recognition
and Discrete

LECTURE 18: THE SAMPLING THEOREM

• Objectives:
Representation Using Impulses
FT of a Sampled Signal
Signal Reconstruction
Signal Interpolation
Aliasing
Multirate Signal Processing

• Resources:
Wiki: Nyquist Sampling Theorem
CNX: The Sampling Theorem
CNX: Downsampling

URL:
Representation of a CT Signal Using Impulse Functions
• The goal of this lecture is to convince you that bandlimited CT signals, when
sampled properly, can be represented as discrete-time signals with NO loss of
information. This remarkable result is known as the Sampling Theorem.
• Recall our expression for a pulse train: x(t)

p(t )    (t  nT ) … …
n   t
• A sampled version of a CT signal, x(t), is: -2T -T 0 T 2T
 
x s (t )  x(t ) p (t )   x(t )  t  nT    x(nT )  t  nT 
n   n  

This is known as idealized sampling.


• We can derive the complex Fourier series of a pulse train:

p(t )  c e
k  
k
jk 0t
where  0  2 / T

 
T /2 T /2
1 1 1  jk0t 1
T T/ 2 T T/ 2
 jk0t  jk 0t
ck  p (t ) e dt   (t ) e dt  e t 0 
T T

1 jk0t
p(t )  
k   T
e

EE 3512: Lecture 18, Slide 2


Fourier Transform of a Sampled Signal
• The Fourier series of our sampled signal, xs(t) is:

1
x s (t )  p(t ) x(t )   x(t )e jk0t
k   T

• Recalling the Fourier transform properties of linearity (the transform of a sum


is the sum of the transforms) and modulation (multiplication by a complex
exponential produces a shift in the frequency domain), we can write an
expression for the Fourier transform of our sampled signal:

    1
X s e  F p (t ) x(t )  F   x(t )e
j jk0 t 
1 

   F x(t )e 0
jk t

k   T  T k  
1 
  X (e j (  k0 ) )
T k  

• If our original signal, x(t), is bandlimited: X (e j )  0 for   B

EE 3512: Lecture 18, Slide 3


Signal Reconstruction
 
• Note that if  s  2 B , the replicas of X e j do not overlap in the frequency
domain. We can recover the original signal exactly.

• The sampling frequency,  s  2 B , is referred to as the Nyquist sampling


frequency.
• There are two practical problems associated with this approach:
 The lowpass filter is not physically realizable. Why?
 The input signal is typically not bandlimited. Explain.
EE 3512: Lecture 18, Slide 4
Signal Interpolation
• The frequency response of the lowpass, or interpolation, filter is:
T ,  B    B
H ( e j )  
 0, elsewhere
• The impulse response of this filter is given by:
BT sin  Bt /   BT
h(t )   sinc (Bt/πB    t  
  Bt /   
• The output of the interpolating filter is given by the convolution integral:

y (t )  h(t ) * x s (t )   x ( )h(t   )d

s

 
   
    x(nT )  t  nT  h(t   )d    x(nT )  t  nT  h t   d
  n     n  
 
   x(nT )  t  nT  h t   d
n    
• Using the sifting property of the impulse:
 
y (t )    x(nT )  t  nT  h t   d
n    

  x(nT )h t  nT 
n  

EE 3512: Lecture 18, Slide 5


Signal Interpolation (Cont.)
• Inserting our expression for the
impulse response:
BT  B
y (t )  
 n 
x ( nT ) sinc (

(t  nT ))
• This has an interesting graphical
interpretation shown to the right.
• This formula describes a way to
perfectly reconstruct a signal from
its samples.
• Applications include digital to
analog conversion, and changing
the sample frequency (or period)
from one value to another, a process
we call resampling (up/down).
• But remember that this is still a
noncausal system so in practical
systems we must approximate this
equation. Such implementations
are studied more extensively in an
introductory DSP class.
EE 3512: Lecture 18, Slide 6
Aliasing
• Recall that a time-limited signal cannot be bandlimited. Since all signals are
more or less time-limited, they cannot be bandlimited. Therefore, we must
lowpass filter most signals before sampling. This is called an anti-aliasing
filter and are typically built into an analog to digital (A/D) converter.
• If the signal is not bandlimited distortion will occur when the signal is
sampled. We refer to this distortion as aliasing:

• How was the sample frequency for CDs and MP3s selected?

EE 3512: Lecture 18, Slide 7


Sampling of Narrowband Signals
• What is the lowest sample frequency
we can use for the narrowband signal
shown to the right?
• Recalling that the process of
sampling shifts the spectrum of the
signal, we can derive a generalization
of the Sampling Theorem in terms of
the physical bandwidth occupied by
the signal.
• A general guideline is 2 B  f s  4 B , where B = B2 – B1.

• A more rigorous equation depends on B1 and B2:


r f  B/2
f s  2B where r   c
r B
and
f c  ( B1  B2 ) / 2
r   r  (greatest integer greater than or equal to r )

• Sampling can also be thought of as a modulation operation, since it shifts a


signal’s spectrum in frequency.
EE 3512: Lecture 18, Slide 8
Undersampling and Oversampling of a Signal

EE 3512: Lecture 18, Slide 9


Sampling is a Universal Engineering Concept
• Note that the concept of
sampling is applied to many
electronic systems:
 electronics: CD players,
switched capacitor filters,
power systems
 biological systems: EKG,
EEG, blood pressure
 information systems: the
stock market.
• Sampling can be applied in
space (e.g., images) as well
as time, as shown to the
right.

• Full-motion video signals are sampled spatially (e.g., 1280x1024 pixels at 100
pixels/inch) , temporally (e.g., 30 frames/sec), and with respect to color (e.g.,
RGB at 8 bits/color). How were these settings arrived at?

EE 3512: Lecture 18, Slide 10


Downsampling and Upsampling
• Simple sample rate conversions, such as converting from 16 kHz to 8 kHz,
can be achieved using digital filters and zero-stuffing:

EE 3512: Lecture 18, Slide 11


Oversampling
• Sampling and digital signal processing can be combined to create higher
performance samplers 
• For example, CD players use an oversampling approach that involves
sampling the signal at a very high rate and then downsampling it to avoid the
need to build high precision converter and filters.

EE 3512: Lecture 18, Slide 12


Summary
• Introduced the Sampling Theorem and discussed the conditions under which
analog signals can be represented as discrete-time signals with no loss of
information.
• Discussed the spectrum of a discrete-time signal.
• Demonstrated how to reconstruct and interpolate a signal using sinc
functions that are a consequence of the Sampling Theorem.
• Introduced a variety of applications involving sampling including
downsampling and oversampling.

EE 3512: Lecture 18, Slide 13

You might also like