Lecture 06

Computer Network

Course: Computer Education and nutritional

Database
COMPUTER NETWORK

2
Computer Network

Multiple computers that are

connected together to share
information and other resources

3
 Examples of Computer Network Usage

• I can send an eMail message to a remote computer

using the SMTP protocol
• I can browse documents residing on a remote
computer using the HTTP protocol
• I can download or upload files to a remote
computer using the FTP protocol
• I can run a program on a remote computer using
the TELNET protocol

4
COMPONENTS OF CONVENTIONAL
COMPUTER NETWORKS

5
1. Computers

2. Network Interface Cards (NIC)

– I/O device that plugs into the computer
– Enables it to communicate over a network

3. Hub
– The network traffic controller

6
4. Cables
– Are either electrical or optical
– Not required at all for wireless networks

5. Protocol
– Rules governing communications over the network

7
HOW DOES A CONVENTIONAL
NETWORK WORK?

8
1. Suppose computer A wants to send a message to
D

2. Computer A sends the message to its NIC

3. The NIC translates the message into electrical

pulses suitable for the computer network in use &
transmits it to the hub through the cable
9
4. The hub receives them and forwards them to all
computers connected to the it

5. The NICs of all computers connected to the hub

receive the forwarded electrical pulses

6. The NIC of computer D decides that the message

is for it, & translates the pulses back to a form
suitable for the computer
10
HUB

11
Hub (1)

• A device that is used to connect several computers

to form a network

• A hub has several ports. The number generally is 8,

12, 16, 24, 32, or 48

12
Hub (2)

• Each computer in a network is connected to one of

those ports through a cable

• A computer wanting to send a message to one of

the others in the network sends a message to the
hub, which, in turn, broadcasts the message to all
others connected to it

13
HUB

14
15
Packet (1)
• The smallest unit of data transmitted over a computer
network

• A message to be transferred over the network is

broken up into small packets by the sending computer

• Each packet contains the following info:

– Sender's address
– Destination address
– Data
– Error-recovery info
16
 Packet (2)

• All packets travel independently

• When all packets are received by the destination

computer, it reassembles them to form the original
message

17
Types of Computer Networks

According to the distance between nodes

• LAN: Local Area Network
• WAN: Wide Area Network

18
LAN

• A network of computers located in the same

building or a handful of nearby buildings

• Examples:
– Computer network of a University campus

19
WAN
• A network in which computers are separated by great
distances, typically across cities or even continents

• May consist of several interconnected LANs

• Example:
– The network connecting the ATM of a bank located in
various cities
– A network connecting the local and oversea offices of a SW
house
– Internet
20
Connecting LANs to other Networks
Special-purpose devices are used to link LANs to
other networks

They may belong to one of the following

categories:
– Routers
– Bridges
– Gateways
– Modems
21
NETWORK APPLICATIONS

• There are number of specific applications that are

only possible over a network.

o Electronic Mail
o Electronic Fund Transfer
o Video Conferencing
o Distributed Systems
o Internet

22
 Router
• A special-purpose computer that directs data traffic
when several paths are available

• A router examines the destination info in each arriving

packet and then routes it through the most efficient
path available

• The router either delivers the packet to the destination

computer across a local network or forwards the packet
to another router that is closer to the final destination
by using Router Information Protocol. 23
Type A
header

Payload Type A
header

Payload

ROUTER ROUTER
Significant
geographical
SERVER distance SERVER

Type A
header

Payload

LAN 1 LAN 2

WAN
Bridge

• Used to form a connection between two separate,

but similar networks

• In a way, it creates an extended LAN by passing

information between two or more LANs

25
 Gateway

• A special-purpose computer that connects and

translates between networks that use different
communications protocols

• LAN’s may use a gateway (or router) to connect to

the Internet

26
 A gateway performs the translation
between two different types of networks.

3
Modem (1)

• I/O device used for connecting two computers

over telephone lines

• modem = modulator + demodulator

28
Modem (2)

• Modulator converts computer messages to

electrical pulses that are suitable for
transmission over the telephone lines

• Demodulator converts electrical pulses

received over telephone lines into messages
that are comprehensible for computers

29
Network Topologies
• The pattern in which computers are connected to form a network

• Popular patterns:

– Bus
– Star
– Mesh
– Ring

• There are two different networking structures:

– Peer to Peer
– Client Server

• Networks are also formed by combining 2 or more of these 4 basic

patterns
30
31
Bus topology

• All networked nodes are interconnected, peer to

peer, using a single, open-ended cable
• Both ends of the bus must be terminated with a
terminating resistor to prevent signal bounce

32
Bus topology

33
Advantages of Bus topology

1) Easy to implement and extend

2) Well suited for temporary networks that must be
set up in a hurry
3) Typically the least cheapest topology to
implement
4) Failure of one station does not affect others

34
Disadvantages of Bus topology

1) Difficult to administer/troubleshoot
2) Limited cable length and number of stations
3) A cable break can disable the entire network; no
redundancy
4) Maintenance costs may be higher in the long run
5) Performance degrades as additional computers
are added

35
Ring topology

• started out as a simple peer-to-peer LAN topology

• Each networked workstation had two
connections: one to each of its nearest neighbors
• Data was transmitted unidirectionally around the
ring
• Sending and receiving of data takes place by the
help of TOKEN

36
Token Passing

• Token contains a piece of information which along

with data is sent by the source computer
• This token then passes to next node, which checks
if the signal is intended to it
If yes, it receives it and passes the empty to into the
network
otherwise passes token along with the data to next
node

37
Ring topology

38
Advantages of Ring topology

1) This type of network topology is very organized

2) Performance is better than that of Bus topology
3) No need for network server to control the
connectivity between workstations
4) Additional components do not affect the performance
of network.
5) Each computer has equal access to resources.

39
Disadvantages of Ring topology

1) Each packet of data must pass through all the

computers between source and destination,
slower than star topology
2) If one workstation or port goes down, the entire
network gets affected
3) Network is highly dependent on the wire which
connects different components

40
Star topology

• Have connections to networked devices that

“radiate” out form a common point
• Each networked device in star topology can access
the media independently
• Have become the dominant topology type in
contemporary LANs
• Stars have made buses and rings obsolete in LAN
topologies

41
Star topology

42
Advantages of star topology

1) Compared to Bus topology it gives far much

better performance
2) Easy to connect new nodes or devices
3) Centralized management. It helps in monitoring
the network
4) Failure of one node or link doesn’t affect the rest
of network

43
 Disadvantages of star topology

1) If central device fails whole network goes down

2) The use of hub, a router or a switch as central
device increases the overall cost of the network
3) Performance and as well number of nodes which
can be added in such topology is depended on
capacity of central device

44
 Networking Protocols

• Networks use protocols, or rules, to exchange info

through shared channels

• Protocols prevent collisions of packets caused by

simultaneous transmission between two or more
computers

• Several protocols are available for various types of

networks. Here we discuss two that are popular for
LANs: Ethernet; Token Ring 45
 Ethernet Protocol

• A computer using this protocol checks if a shared

connection is in use before transmitting a message
• If not, the computer transmits data
• Two computers may sense an idle connection and
may send packets simultaneously. To account for
such situations, transmitting computers continue to
monitor the connection and re-transmit if a packet
collision occurs

46
Token Ring Protocol

• This protocol passes a special message called a

token through the network.
• A computer that receives the token is given
permission to send a packet of information
• If the computer has no packet to send, it
passes the token to the next computer.

47
Computer Networks
=
Computers
+
Communications
48