Lecture 4

Representing Instructions
Logical Operations
Conditions and Branches
 §2.5 Representing Instructions in the Computer
Representing Instructions
 Instructions are encoded in binary
 Called machine code
 MIPS instructions
 Encoded as 32-bit instruction words
 Small number of formats encoding operation code
(opcode), register numbers, …
 Regularity!
 Register numbers
 $t0 – $t7 are reg’s 8 – 15
 $t8 – $t9 are reg’s 24 – 25
 $s0 – $s7 are reg’s 16 – 23

Chapter 2 — Instructions: Language of the Computer — 2

 Instruction format
A form of representation of an instruction composed
of fields of binary numbers.
 Machine language
Binary representation used for communication within
a computer system.
Opcode
The field that denotes the operation and format of an
instruction.

Chapter 2 — Instructions: Language of the Computer — 3

MIPS R-format Instructions
op rs rt rd shamt funct
6 bits 5 bits 5 bits 5 bits 5 bits 6 bits

 Instruction fields
 op: operation code (opcode)
 rs: first source register number
 rt: second source register number
 rd: destination register number
 shamt: shift amount (00000 for now)
 funct: function code (extends opcode)

Chapter 2 — Instructions: Language of the Computer — 4

R-format Example
op rs rt rd shamt funct
6 bits 5 bits 5 bits 5 bits 5 bits 6 bits

add $t0, $s1, $s2

special $s1 $s2 $t0 0 add

0 17 18 8 0 32

000000 10001 10010 01000 00000 100000

000000100011001001000000001000002 = 0232402016

Chapter 2 — Instructions: Language of the Computer — 5

Hexadecimal
 Base 16
 Compact representation of bit strings
 4 bits per hex digit

0 0000 4 0100 8 1000 c 1100

1 0001 5 0101 9 1001 d 1101
2 0010 6 0110 a 1010 e 1110
3 0011 7 0111 b 1011 f 1111

 Example: eca8 6420

 1110 1100 1010 1000 0110 0100 0010 0000

Chapter 2 — Instructions: Language of the Computer — 6

MIPS I-format Instructions
op rs rt constant or address
6 bits 5 bits 5 bits 16 bits

 Immediate arithmetic and load/store instructions

 rt: destination or source register number
 Constant: –215 to +215 – 1
 Address: offset added to base address in rs
 Design Principle 4: Good design demands good
compromises
 Different formats complicate decoding, but allow 32-bit
instructions uniformly
 Keep formats as similar as possible

Chapter 2 — Instructions: Language of the Computer — 7

Stored Program Computers
The BIG Picture
 Instructions represented in
binary, just like data
 Instructions and data stored
in memory
 Programs can operate on
programs
 e.g., compilers, linkers, …
 Binary compatibility allows
compiled programs to work
on different computers
 Standardized ISAs

Chapter 2 — Instructions: Language of the Computer — 8

 The following problems deal with sign extension
and overflow. Registers $s0 and $s1 hold the
values as shown in the table below. You will be
asked to perform an MIPS assembly language
instruction on these registers and show the
result.

Chapter 2 — Instructions: Language of the Computer — 9

 2.8.1For the contents of registers $s0 and
$s1as specified above,what is the value of
$t0 for the following assembly code?
add $t0, $s0, $s1
Is the result in $t0 the desired result, or
has there been overflow?

 Answer: Overflow

Chapter 2 — Instructions: Language of the Computer — 10

 2.8.2For the contents of registers $s0 and
$s1as specified above, what is the value of
$t0 for the following assembly code?
sub $t0, $s0, $s1
Is the result in $t0 the desired result, or
has there been overflow?

 Answer: No overflow

Chapter 2 — Instructions: Language of the Computer — 11

 In the following problems, the data table
contains bits that represent the opcode of
an instruction. You will be asked to
interpret the bits as MIPS instructions into
assembly code and determine what format
of MIPS instruction the bits represent.

Chapter 2 — Instructions: Language of the Computer — 12

 2.10.1 For the binary entries above, what
instruction do they represent?
 a ) add $s0, $s0, $s0
 b) sub $t1, $t2, $t3
 2.10.2 What type (I-type, R-type)
instruction do the binary entries above
represent ?

Chapter 2 — Instructions: Language of the Computer — 13

 §2.6 Logical Operations
Logical Operations
 Instructions for bitwise manipulation
Operation C Java MIPS
Shift left << << sll
Shift right >> >>> srl
Bitwise AND & & and, andi
Bitwise OR | | or, ori
Bitwise NOT ~ ~ nor

 Useful for extracting and inserting

groups of bits in a word
Chapter 2 — Instructions: Language of the Computer — 14
Shift Operations
op rs rt rd shamt funct
6 bits 5 bits 5 bits 5 bits 5 bits 6 bits

 shamt: how many positions to shift

 Shift left logical
 Shift left and fill with 0 bits
 sll by i bits multiplies by 2i
 Shift right logical
 Shift right and fill with 0 bits
 srl by i bits divides by 2i (unsigned only)

Chapter 2 — Instructions: Language of the Computer — 15

AND Operations
 Useful to mask bits in a word
 Select some bits, clear others to 0
and $t0, $t1, $t2

$t2 0000 0000 0000 0000 0000 1101 1100 0000

$t1 0000 0000 0000 0000 0011 1100 0000 0000

$t0 0000 0000 0000 0000 0000 1100 0000 0000

Chapter 2 — Instructions: Language of the Computer — 16

OR Operations
 Useful to include bits in a word
 Set some bits to 1, leave others unchanged
or $t0, $t1, $t2

$t2 0000 0000 0000 0000 0000 1101 1100 0000

$t1 0000 0000 0000 0000 0011 1100 0000 0000

$t0 0000 0000 0000 0000 0011 1101 1100 0000

Chapter 2 — Instructions: Language of the Computer — 17

NOT Operations
 Useful to invert bits in a word
 Change 0 to 1, and 1 to 0
 MIPS has NOR 3-operand instruction
 a NOR b == NOT ( a OR b )
nor $t0, $t1, $zero Register 0: always
read as zero

$t1 0000 0000 0000 0000 0011 1100 0000 0000

$t0 1111 1111 1111 1111 1100 0011 1111 1111

Chapter 2 — Instructions: Language of the Computer — 18

funct
 addition with overflow: add instruction
 funct=33dec
 overflow ignored
 subtract without overflow: sub instruction
 funct=34dec
 subtract with overflow: sub instruction
 funct=35dec
 overflow ignored

Chapter 2 — Instructions: Language of the Computer — 19

R-type format| Op-code| R s | Rt | Rd | SA |Funct-code |
J type Format
+--------+--------+-------+-------+------+--------+
6 5 5 16
 funct=37dec for or instruction
+--------+--------+-------+------------------------+
I-type format|Op-code | forR s nor
 funct=39dec | Rtinstruction
| 2’s complement constant|
+--------+--------+-------+------------------------+
 funct=40dec for xor instruction
6 26
+--------+-----------------------------------------+
J-type format| Op-code| jump_target |
+--------+-----------------------------------------+
^ ^
| |
bit 31 bit 0

I ns t r uct i ons and t hei r f or mat s

Chapter 2 — Instructions: Language of the Computer — 20
 §2.7 Instructions for Making Decisions
Conditional Operations
 Branch to a labeled instruction if a
condition is true
 Otherwise, continue sequentially
 beq rs, rt, L1
 if (rs == rt) branch to instruction labeled L1;
 bne rs, rt, L1
 if (rs != rt) branch to instruction labeled L1;
 j L1
 unconditional jump to instruction labeled L1

Chapter 2 — Instructions: Language of the Computer — 21

Compiling If Statements
 C code:
if (i==j) f = g+h;
else f = g-h;
 f, g, … in $s0, $s1, …
 Compiled MIPS code:
bne $s3, $s4, Else
add $s0, $s1, $s2
j Exit
Else: sub $s0, $s1, $s2
Exit: …
Assembler calculates addresses

Chapter 2 — Instructions: Language of the Computer — 22

Compiling Loop Statements
 C code:
while (save[i] == k) i += 1;
 i in $s3, k in $s5, address of save in $s6
 Compiled MIPS code:
Loop: sll $t1, $s3, 2
add $t1, $t1, $s6
lw $t0, 0($t1)
bne $t0, $s5, Exit
addi $s3, $s3, 1
j Loop
Exit: …

Chapter 2 — Instructions: Language of the Computer — 23

Basic Blocks
 A basic block is a sequence of instructions
with
 No embedded branches (except at end)
 No branch targets (except at beginning)

 A compiler identifies basic

blocks for optimization
 An advanced processor
can accelerate execution
of basic blocks

Chapter 2 — Instructions: Language of the Computer — 24

More Conditional Operations
 Set result to 1 if a condition is true
 Otherwise, set to 0
 (set on less then)
slt rd, rs, rt
 if (rs < rt) rd = 1; else rd = 0;
 slti rt, rs, constant
 if (rs < constant) rt = 1; else rt = 0;
 Use in combination with beq, bne
slt $t0, $s1, $s2 # if ($s1 < $s2)
bne $t0, $zero, L # branch to L
Chapter 2 — Instructions: Language of the Computer — 25
Branch Instruction Design
 Hardware for <, ≥, … slower than =, ≠
 Combining with branch involves more work
per instruction, requiring a slower clock
 All instructions penalized!
 beq and bne are the common case
 This is a good design compromise

Chapter 2 — Instructions: Language of the Computer — 26

Signed vs. Unsigned
 Signed comparison: slt, slti
 Unsigned comparison: sltu, sltui
 Example
 $s0 = 1111 1111 1111 1111 1111 1111 1111 1111
 $s1 = 0000 0000 0000 0000 0000 0000 0000 0001
 slt $t0, $s0, $s1 # signed
 –1 < +1  $t0 = 1
 sltu $t0, $s0, $s1 # unsigned
 +4,294,967,295 > +1  $t0 = 0

Chapter 2 — Instructions: Language of the Computer — 27