Scribd
Upload
192 views16 pages

Development of A Smart Power Meter For AMI

The document discusses the development of a smart power meter using ZigBee communication for AMI (Advanced Metering Infrastructure). It proposes using the Microchip ATMEL89S52 microcontroller to develop a smart power meter that can transmit detailed power consumption and outage event data to a backend system via a ZigBee wireless network. The ZigBee network allows for two-way communication compared to older automatic meter reading systems based on GSM. Key aspects of the proposed system include the hardware requirements, ZigBee communication standard, microcontroller features, and software requirements.

Uploaded by

Dinesh Kuma
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
192 views16 pages

Development of A Smart Power Meter For AMI

The document discusses the development of a smart power meter using ZigBee communication for AMI (Advanced Metering Infrastructure). It proposes using the Microchip ATMEL89S52 microcontroller to develop a smart power meter that can transmit detailed power consumption and outage event data to a backend system via a ZigBee wireless network. The ZigBee network allows for two-way communication compared to older automatic meter reading systems based on GSM. Key aspects of the proposed system include the hardware requirements, ZigBee communication standard, microcontroller features, and software requirements.

Uploaded by

Dinesh Kuma
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 16

Development of a Smart Power Meter for AMI

Based on ZigBee Communication

PROJECT GUIDED BY: PREPARED BY:


MM.ARUN PRASATH M.E K.Anandan
SENIOR LECTURE, M.Dinesh kumar
(Final year E.C.E)
Abstract:
  

 The wireless communicationnetwork can be utilized for


the Advanced Metering Infrastructure(AMI). Therefore, this
paper tries to use the new wireless communication
technologies to design and implement a ZigBee-based smart
power meter. An outage recording system is also designed
and embedded into the smart meter. The microcontroller of
Microchip AtmeL89S52 series is used to develop the
proposed smart power meter.

 A ZigBee system is then deigned and integrated into the


proposed power meter, and used to transmit the detailed
power consumption data and outage event data to rear-end
processing system.
Introduction
 While most of the power meters are still
mechanical ones without digitization. An AMI
consists of smart meter, communication
technology, meter data management, and
associated software and hardware
 ZigBee, a low-speed LR-WPAN (Low-Rate Wireless
Area Personal Network) based on IEEE 802.15.4
standard, is one of them.
 The microcontroller of Microchip ATMEL89S52
series is used to develop a smart power meter.
AMI

Advanced Metering Infrastructure (AMI) refers to


systems that measure, collect and analyses energy
usage, and interact with advanced devices such as
electricity meters, gas meters, heat meters, and water
meters, through various communication media either
on request (on-demand) or on pre-defined schedules
EXISTING

 AMI differs from traditional Automatic meter reading


(AMR) in that it enables two-way communications with
the meter.

Systems only capable of meter readings do not qualify as


AMI systems.

IN old method they used GSM communication system


for transmitting the readings.
PROPOSED SYSTEM

 In this we are using AMI(Advanced metering


infrastructure) for calculating the readings.

 By using zigBee communication for


transmitting the data’s

 The microcontroller of microchip ATMEL89S52


series is used to develop the smart power meter
ZIGBEE-BASED SMART POWER METER

.
ZigBee and Other Wireless
Technologies

Source: http://www.zigbee.org/en/about/faq.asp
TRANSMISSION SIDE
RECEIVER SIDE
FEATURES

 Fully Static Operation: 0 Hz to 33 MHz


 256 x 8-bit Internal RAM
 32 Programmable I/O Lines
 Three 16-bit Timer/Counters
 Interrupt Recovery from Power-down Mode
 Watchdog Timer
 Dual Data Pointer
 Power-off Flag
 Fast Programming Time
The 802 Wireless Space

Source: http://www.zigbee.org/en/resources/
SYSTEM SPECIFICATION
 HARDWARE REQUIREMENT
 7805 regulator IC
 100 uF electrolytic capacitor, at least 25V voltage rating
 10 uF electrolytic capacitor, at least 6V voltage rating
 100 nF ceramic or polyester capacitor
 MODIFICATION IDEAS
 MORE OUTPUT CURRENT
 
 SOFTWARE REQUIREMENT
 Embedded in c
 Keil compiler
THE ZIGBEE/IEEE 802.15.4 STACK
ARCHITECTURE

You might also like