Scribd
Upload
682 views

Source Transformation

The document discusses source transformations, which allow transforming a voltage source in series with a resistor into a current source in parallel with a resistor, and vice versa. This technique can be used to simplify circuits for analysis. An example shows using source transformations to find the voltage vo across a resistor by reducing the original circuit. First, a parallel resistor is removed without altering the circuit. Then, a series resistor is removed using a source transformation. This leaves the reduced circuit that can be directly solved for vo.

Uploaded by

mk07 nat
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
682 views

Source Transformation

The document discusses source transformations, which allow transforming a voltage source in series with a resistor into a current source in parallel with a resistor, and vice versa. This technique can be used to simplify circuits for analysis. An example shows using source transformations to find the voltage vo across a resistor by reducing the original circuit. First, a parallel resistor is removed without altering the circuit. Then, a series resistor is removed using a source transformation. This leaves the reduced circuit that can be directly solved for vo.

Uploaded by

mk07 nat
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 10

Source Transformations 4.

9
The Node-Voltage Method and the Mesh-Current Method are powerful techniques for
.solving circuits

We are still interested in in methods that can be used to simplify circuits like to what we did
in parallel and series resistors and  to Y transformations

A method called Source Transformations will allow the transformations of a voltage


.source in series with a resistor to a current source in parallel with resistor

R a
a

is R
vs +
-

b
b

The double arrow indicate that the transformation is bilateral , that we can start with either
configuration and drive the other
R
a
a

vs is R RL
+
- RL
iL iL
b
b

vs R
iL  iL  is
R  RL R  RL

, Equating we have

vs R vs
 is  is  OR v s  Ri s
R  RL R  RL R
Example 4.8 (a) find the power associated with the 6 V source
State whether the 6 V source is absorbing or )b(
delivering power

We are going to use source transformation to reduce the circuit, however note that we
.will not alter or transfer the 6 V source because it is the objective
40
 8A
5
  
(20 || 5)  4Ω

(8A )(4Ω)  32 V
(6  4)  10Ω

(10  10)  20Ω

32
 1.6A
20
    
(30 || 20)  12Ω

(4  12)  16Ω

(1.6A )(12Ω)  19.2 V


i i=

 0.825 A


 P6V  (0.825)(6)  4.95 W

It should be clear if we transfer the 6V during these steps you will not be able to find
the power associated with it
? Example 4.9 (a) use source transformations to find the voltage vo

vo

Since the  resistor is connected across or in parallel to the 250 V source then we can
remove it without altering any voltage or current on the circuit except the 250 V current
which is not an objective any how

Our objective is vo Therefore we remove the 

Similarly the  resistor is connected in series with the 8 A source then we can remove
it without altering any voltage or current on the circuit
Now the circuit become

vo

We now use the source transformation to replace the 250 V with the  resistor with a
current source and parallel resistor

vo

250 We now combine the parallel
 10 A (25 ||100 || 20)  10Ω
25 resistors

vo

We now combine the parallel resistors (25 ||100 || 20)  10Ω

The circuit now become

  v o  (2A )(10)  20 V
vo

You might also like