Scribd
Upload
138 views10 pages

EET308 PFA Solving Problem 1 GS

This document discusses using the Gauss-Seidel method to solve a 3-bus power flow problem. It provides the one-line diagram of the system showing bus voltages, loads, and line impedances. It then shows the steps to: 1) Perform one iteration of the Gauss-Seidel method using initial voltage estimates. 2) Calculate line flows, losses, and slack bus power given the converged voltages. 3) Draw a power flow diagram showing the results.

Uploaded by

Mustafa Alfahad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
138 views10 pages

EET308 PFA Solving Problem 1 GS

This document discusses using the Gauss-Seidel method to solve a 3-bus power flow problem. It provides the one-line diagram of the system showing bus voltages, loads, and line impedances. It then shows the steps to: 1) Perform one iteration of the Gauss-Seidel method using initial voltage estimates. 2) Calculate line flows, losses, and slack bus power given the converged voltages. 3) Draw a power flow diagram showing the results.

Uploaded by

Mustafa Alfahad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

SoESE

EET308 Power System Analysis


Topic:
PFA Revision-1

Dr Ir Dina Maizana Maiz Ahmad

EET502 Advanced Power System Analysis and Control :: Revision by Dr Ir Dina Maizana Maiz Ahmad
Prob.1
GS Method
• Figure 6.20 shows the one-line diagram of a simple three-bus power
system with generation at bus 1. The voltage at bus 1 is V1 =1.0 <0o per
unit. The scheduled loads on buses 2 and 3 are marked on the diagram.
Line impedances are marked in per unit on a 100-MVA base.
• (a) Using Gauss Seidel method and initial estimates of V2(0) =1.0 +j0 and
V3(0) =1.0 +j0, calculate V2 and V3. Perform one iteration.
• (b) If after several iterations the bus voltage converge to
V2 =0.90 - j0.10 pu
V3 =0.95 – j0.05 pu
• Calculate the line flows and line losses and the slack bus real and reactive
power. Construct a power flow diagram and show the direction of the line
flows.

EET502 Advanced Power System Analysis and Control :: Revision by Dr Ir Dina Maizana Maiz Ahmad
GS Method
V1 =1.0 <0o 1 2
J(1/30)
400 MW

320Mvar
Slack

J0.0125 J0.05
3

300 MW 270 Mvar


Figure 6.20 One line diagram

EET502 Advanced Power System Analysis and Control :: Revision by Dr Ir Dina Maizana Maiz Ahmad
Solving
•  
Solving
•  
Solving
•  
Solving
•  
Solving
•
• (b) If after several iterations the bus voltage converge to
 V =0.90 - j0.10 pu
2

V3 =0.95 – j0.05 pu
• And V1 =1.0 <0o
• Currents flow are:
• ;
• ;
• ;
• ;
• 1; 1
• 1; 1
Solving
•
•  
Power flow are:
o ;
o 2.4;
o ;
o ;
o ;
o ;
• Line losses:
o ;
o ;
o 1;
• The slack bus real and reactive power calculation by using eq. 6.32 and 6.33 that are:
• ;
GS Method
1  2
7pu 3 𝑝𝑢 3  𝑝𝑢
3  𝑝𝑢 0.6
  𝑝𝑢 2.4
  𝑝𝑢 4pu
4  𝑝𝑢 1  𝑝𝑢
4  𝑝𝑢 j3.2pu
j7pu 0.8
  𝑝𝑢
Slack

0.4
  𝑝𝑢

3.6
  pu 4
1  𝑝𝑢
  𝑝𝑢 0.9
  𝑝𝑢
3

3pu j2.7 pu
EET502 Advanced Power System Analysis and Control :: Revision by Dr Ir Dina Maizana Maiz Ahmad

You might also like