Scribd
Upload
66 views46 pages

Comptia Network +: Dissecting The Osi Model

The document provides an overview of the OSI 7-layer model and how it compares to the TCP/IP model. It describes each layer of the OSI model in order, from the physical layer dealing with physical connections up through cables and wireless signals, to the application layer which provides services to the user. Key aspects like protocol data units, logical addressing, error checking, and establishing connections are defined at various layers. The TCP/IP model is similar but combines some layers for efficiency.

Uploaded by

Pradeep Manral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
66 views46 pages

Comptia Network +: Dissecting The Osi Model

The document provides an overview of the OSI 7-layer model and how it compares to the TCP/IP model. It describes each layer of the OSI model in order, from the physical layer dealing with physical connections up through cables and wireless signals, to the application layer which provides services to the user. Key aspects like protocol data units, logical addressing, error checking, and establishing connections are defined at various layers. The TCP/IP model is similar but combines some layers for efficiency.

Uploaded by

Pradeep Manral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 46

CompTIA Network +

Chapter 2
Dissecting the OSI Model
Objectives
 What is the purpose of a Network model?
 What are the layers of the OSI model?
 What are the characteristics of each layer of the
OSI model?
 How does the TCP/IP stack compare to the OSI
model?
 What are the well-known TCP and/or UDP port
numbers for a given collection of common
applications
The Purpose of Reference Models
• It breaks network communication into smaller, simpler parts that
are easier to develop.
• It facilitates standardization of network components to allow
multiple-vendor development and support.
• It allows different types of network hardware and software to
communicate with each other.
• It prevents changes in one layer from affecting the other layers
so that they can develop more quickly.
• It breaks network communication into smaller parts to make
learning it easier to understand.
Warriors of the Net
The OSI seven-layer model
7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

Figure 2-2 OSI Stack


Mnemonics for the OSI Model
Away All
Pizza People
Sausage Seem
Throw To
Not Need
Do Data
Please Processing
Protocol Data Unit (PDU)
Application

Presentation

Session

Transport Segments

Network Packets

Data Link Frames

Physical Bits

Figure 2-3 PDU Names


Quick Summary of Layers 1-4

4 Transport TCP & UDP Ports Service

3 Network Routers, IP Address WAN


Switches, MAC
2 Data Link LAN
Address
1 Physical Cables
OSI Layers in Wireshark

1
2
3
4
7
Physical Layer

• How Bits are represented


on the medium
• Wring standards for
connectors and jacks
Physical • Physical topology
• Synchronizing bits
• Bandwidth usage
• Multiplexing strategy

Figure 2-4 Layer 1: Physical Layer


Wiring Standards
Asynchronous and Synchronous
Communications
• Synchronizing Bits
– Two devices must agree on when one bit
stops and another bit starts
• Asynchronous
– Uses start and stop bits
• Synchronous
– Internal clocks are synchronized at each end
of the cable
Bandwidth Usage
• Broadband
– Multiple channels share the same medium
– Ex: cable TV uses frequency division
multiplexing (each channel uses a different
frequency range)
• Baseband
– The whole medium is used for one
transmission
– Example: Ethernet
Time-Division Multiplexing (TDM)
• Each channel gets the same amount of
time on the wire

AAAA

B_B_ ABCA_CABCA_C

CCCC
Statistical Time-Division
Multiplexing (StatTDM)
• Busy channels get more time on the wire

AAAA

B_B_ ABCACABCAC

CCCC
Frequency Division Multiplexing
(FDM)
• Example: signals sent with different colors
through the same fiber optic cable

AAAA
AAAA
B_B_ B_B_
CCCC
CCCC
Layer 1 Devices
• Cables
• Wireless access points
• Hubs
– Because they don’t pay any attention to
addresses, they just deliver signals to every
connected device like a crossover cable
Data Link Layer

• Physical Addressing
• Logical topology
MAC
• Method of transmitting
on the media
Data Link

• Connection Services
LLC • Synchronizing
transmissions

Figure 2-8 Layer 2: The Data Link Layer


MAC Addresses
• IPCONFIG /ALL
• Physical Address
• Built into the network interface
Connection Services
• Flow control
– Prevents sender from sending data faster than the
client can accept it
• Error control
– When a frame is received, a checksum is used to
detect errors
• Usually a Cyclic Redundancy Check (CRC)
– If the receiver's checksum does not match the
sender's checksum, the frame is discarded and
resent
Layer 2 Devices
• Switches
• Bridges
• Network Interface Cards (NICs)
Network Layer

• Logical addressing
• Switching
• Route discovery and
Network selection
• Connection services
• Bandwidth usage
• Multiplexing strategy

Figure 2-9 Layer 3: The Network Layer


IP Address
• Logical address
• Changes when the device is moved
Switching
• Packet switching
– Data is broken into packets
– Many packets travel along network connections
like cars on a freeway
• Circuit switching
– A physical line is dedicated to each connection
– Ex: old copper landline phone systems
• Message switching
– Store-and-forward, like email
Layer 3 Devices
• Routers
• Multilayer Switches
Transport Layer

• TCP/UDP
Transport • Windowing
• Buffering

Figure 2-10 Layer 4: The Transport Layer


TCP and UDP
• Transmission Control Protocol (TCP)
– Connection-oriented and reliable
– Handshake makes sure both ends are ready
– Segments are acknowledged and resent if
necessary
• User Datagram Protocol (UDP)
– Connectionless and unreliable
– No handshake
– Best-effort delivery, no acknowledgements
TCP Sliding Window
Window Size 1
Segment 1
Ack 2

Window Size 2
Segment 2

Segment 3
Sender Receiver
Ack 4

Window Size 4
Segment 4

Segment 5

Segment 6

Segment 7
Ack 8

Figure 2-11 TCP Sliding Window


ICMP
(Internet Control Message Protocol)

• At layer 4
• Used by ping and traceroute, and to
indicate errors such as dropped packets
Session Layer

• Setting up a session
• Maintaining a session
Session • Tearing down a session

Figure 2-12 Layer 5: The Session Layer


Example of a Session
• User logs in with a username & password
• All data now has a special significance
until that user logs off, or the session times
out, or is terminated some other way
• Layer 6 Protocol
– H.323 (voice or video)
– NetBIOS (file sharing)
Presentation Layer
• Data formatting
• Encryption
Presentation

Figure 2-13 Layer 6: The Presentation Layer


Application Layer
• Application services
Application • Service advertisement
Application Layer
• Closest to the user
• Hands data to an application in the format
it expects, with no addresses or other
transmission artifacts
• Examples: a downloaded file, an email
message
The TCP/IP Stack

Application

Transport

Internet

Network Interface
The TCP/IP and OSI Models Compared
OSI Stack TCP/IP Stack
Application

Presentation Application

Session

Transport Transport

Network Internet

Data Link
Network Interface
Physical

Figure 2-15 TCP/IP Stack


IP Ver4 Header
TTL (Time-to-Live)
• TTL decreases by one each time the
packet is forwarded by a router
• If TTL reaches zero, the packet is
discarded
• This eliminates packets trapped in routing
loops
Demo: Routing Loop
TCP Header

Figure 2-17 TCP Segment Format


TCP Header Fields
• Port numbers
– Indicate which program on the end device
should receive the data
– Examples: Port 25 for email, 80 for HTTP
• Window size
– Number of bytes that can be sent before
waiting for an ACK
TCP Header Fields
• Sequence and Acknowledgement
numbers
– Used to put packets in order to reassemble
files and other large messages
• Flags like SYN and ACK are used for the
TCP handshake and to acknowledge data
received
UDP Header
0 16 31
SOURCE PORT DESTINATION PORT
LENGTH CHECKSUM

• No handshake, acknowledgements,
sequencing, or flow control
Common Ports
Link Ch 2d for flash cards
Port Types
Port numbers are assigned in various ways, based
on three ranges:

System Ports (0-1023), System Ports are assigned by IETF process for
standards-track protocols, as per RFC6335. Also known as well-known-
ports

User Ports (1024-49151) ,User Ports are assigned by IANA using the
"Expert Review" process, as per RFC6335

Dynamic and/or Private Ports (49152-65535), Dynamic Ports are not


assigned, they are dynamically created as your computer need them. Also
known as ephemeral ports.
Communication Between Two Systems

You might also like