Tms 320c6713dsk Applications
Tms 320c6713dsk Applications
ON
TMS320C6713 DSK
Guided By
N.PAVAN KUMAR Asst Prof.,
By
M.Vani (07X91A0450)
H.Veeresh (07X91A0451)
S.Krishnaveni (07X91A0421)
D.Ramesh (07X91A0432)
Digital signal processing is one of the core technologies, in
rapidly growing application areas, such as wireless
communications, audio and video processing and industrial
control.
DSPs are processors or microcomputers whose hardware,
software, and instruction sets are optimized for high-speed
numeric processing applications.
Digital signal processors such as the TMS320C6x (C6x) family of
processors are special-purpose microprocessors with a
specialized type of architecture and an instruction set appropriate
for signal processing.
• Dsp’s are designed to perform mathematical
calculations needed in dsp
• Dsp’s must also have apredictable execution time
• Dsp’s can also perform the task’s in parallel
instead of serial incase of traditional mp’s.
Mac’s and multiple execution units.
Efficienta memory access.
Circular buffering.
Dedicated add generation unit.
Speciated instruction sets.
• Telecommunications.
• Voice/speech.
• Automotive.
• Control systems.
• Military.
• Medical.
• Instrumentation.
• Image processing.
The tms320c67x is floating point processor with
32-bit integer support.
The c6713 dsk is a lowcast standalone
development platform which enables users ton
develop applications for t1 c67xx dsp family.
Dsk serves as a hardware reference design for the
tms320c6713 dsp.
The TMS320C6713 processor consists of three
main parts
CPU
Peripherals
memory
• CCS having tools for code generation such as a c
compiler,an assembler and a linker.
• CCS provides useful documentations included with
the dsk package on the following tools.
• Code generation tools.
• Dsp instructions and registers .
• Tools on RTDX,DSP/BIOS.
Simulink is a software package that enables a
model, simulate, and analyze systems whose
outputs change over time.
Simulink can be used to explore the behavior of
a wide range of real-world dynamic systems.
• Power up DSK and watch LEDs.
• Power On Self Test (POST) program stored in FLASH
memory automatically executes.
• POST takes 10-15 seconds to complete.
• All DSK subsystems are automatically tested.
• During POST, a 1kHz sinusoid is output from the AIC23
codec for 1 second.
• Listen with headphones or watch on oscilloscope.
• If POST is successful, all four LEDs blink 3 times and then
remain on.
• Use DSK diagnostic utility to test DSK functionality.
IMPLEMENTATION
Digital Signal Processor becomes an ideal choice as they
provide the best possible combination of performance,
power and cost.
There has been a drive to develop new benchmarking
schemes as the improvement in the processor architecture
made the earlier benchmarking schemes, obsolete and
less reliable.
Current DSP processor development may predict that the
manufacturers will follow the path of general purpose
processors.
?
‘Q’
n
a
Th