Scribd
Upload
123 views15 pages

How The Elevator Works

The document summarizes how elevators work. It discusses the basic designs of hydraulic and rope-geared elevators. Hydraulic elevators use a fluid-filled cylinder and piston to lift the car, while rope-geared elevators use cables connected to a motor and counterweight system. The document also describes elevator safety systems and how modern computers help elevators efficiently transport people to their desired floors.

Uploaded by

PandaGendut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
123 views15 pages

How The Elevator Works

The document summarizes how elevators work. It discusses the basic designs of hydraulic and rope-geared elevators. Hydraulic elevators use a fluid-filled cylinder and piston to lift the car, while rope-geared elevators use cables connected to a motor and counterweight system. The document also describes elevator safety systems and how modern computers help elevators efficiently transport people to their desired floors.

Uploaded by

PandaGendut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 15

How The Elevator Works

By Joseph Mackay Plaxco


The University of the South
Sewanee, TN 37383
Why?

 I find the elevator “cool.”


 Phobia when younger

 Gets people to destinations fast.

 Large cities wouldn’t be the same.


Different Types
 Freight Elevators
 Stage Elevators
The Basic Design
 The basic design is a compartment
that is somehow lifted
 Two Types of Elevators:

• Hydraulic
• Rope-Geared
The Hydraulic Elevator
 The car is moved up and
down using “a fluid piston
mounted inside a cylinder”
(Harris).
 Consists of three parts:
• Tank
• Pump
• Valve
Hydraulic Elevators
A Closer Look

 The car is placed on a piston.


 Fluid Pumping System
 A tank (off to the side) holds the fluid.
 When the valve closes, the car is lifted.
 When the valve opens, the car is lowered.
Diagram of Hydraulic Elevator
 The following link is from the website
“How Stuff Works” written by Tom
Harris.
• How Elevators Work - Hydraulic
Hydraulic Disadvantages

 Two Disadvantages
• Must Have Enough Room
• Energy Inefficient
Rope-Geared Elevators

 These are the most popular types of


elevators.
 Rather than being pushed from

below, these types of elevators are


moved using cables
Rope-Geared Design

 Cables attach to the car and through a sheave.


 The sheave is connected to an electric motor.
 Motor turns one way, elevator moves up. Motor
turns the other way, elevator moves down.
 The ropes are connected to a counterweight.
 The counterweight system serves as a means for
conserving energy.
Rope-Geared Design (Cont’d)

 Rails are used to guide the elevator


 Keep elevator and counterweights steady.
 Rope-geared elevators are much more efficient
and safer.
Diagram of Rope-Geared
Elevator
 The following link came from the
“How Stuff Works” webpage written
by Tom Harris
• Rope-Geared Elevator Diagram
Safety Systems
 More ropes than needed
 Built-in brake systems
 Governor prevents the elevator from falling to the
bottom of the shaft.
Centrifugal force causes a brake system to
activate.
 Also has an electromagnetic brake that is activated if
the elevator loses power.
 Automated Brake System at the top and bottom of the
shaft.
Moving To Destinations
 Modern elevators use computers.
 Slows down
 Only answer “up calls” as going up and the same
for going down.
 Modern “Smart” systems take into account the
busiest parts of the day.
 Press the floor you want in the lobby.
 Load Sensor
Works Cited
 Harris, Tom. “How Elevators Work”.
www.howstuffworks.com/elevator
2002.

You might also like