The document summarizes a student group presentation on diesel power plants. It includes an introduction to diesel power plants, describing how diesel engines are used to power generators and produce electricity. It then lists and describes the main auxiliaries of diesel power plants, such as the fuel, air intake, exhaust, cooling, lubrication and starting systems. The presentation notes advantages like lower costs and higher efficiency compared to steam plants, but also disadvantages like high fuel costs and maintenance. It concludes with details about MAN Energy Solutions providing new diesel engines for power plants in Bangladesh.
The document summarizes a student group presentation on diesel power plants. It includes an introduction to diesel power plants, describing how diesel engines are used to power generators and produce electricity. It then lists and describes the main auxiliaries of diesel power plants, such as the fuel, air intake, exhaust, cooling, lubrication and starting systems. The presentation notes advantages like lower costs and higher efficiency compared to steam plants, but also disadvantages like high fuel costs and maintenance. It concludes with details about MAN Energy Solutions providing new diesel engines for power plants in Bangladesh.
The document summarizes a student group presentation on diesel power plants. It includes an introduction to diesel power plants, describing how diesel engines are used to power generators and produce electricity. It then lists and describes the main auxiliaries of diesel power plants, such as the fuel, air intake, exhaust, cooling, lubrication and starting systems. The presentation notes advantages like lower costs and higher efficiency compared to steam plants, but also disadvantages like high fuel costs and maintenance. It concludes with details about MAN Energy Solutions providing new diesel engines for power plants in Bangladesh.
The document summarizes a student group presentation on diesel power plants. It includes an introduction to diesel power plants, describing how diesel engines are used to power generators and produce electricity. It then lists and describes the main auxiliaries of diesel power plants, such as the fuel, air intake, exhaust, cooling, lubrication and starting systems. The presentation notes advantages like lower costs and higher efficiency compared to steam plants, but also disadvantages like high fuel costs and maintenance. It concludes with details about MAN Energy Solutions providing new diesel engines for power plants in Bangladesh.
Introduction Schematic The plant auxiliaries Advantages Disadvantages Status of diesel power plant in Bangladesh References A generating station in which diesel engine is used as the prime mover for the generation of electrical energy is known as Diesel power station or Diesel power plant. Introduction
The diesel burns inside the engine and the products of this combustion act as the “working fluid” to produce mechanical energy. The diesel engine drives the generator which converts mechanical energy into electrical energy.
The generation cost is considerable due to high price of diesel, therefore,
such power stations are only used to produce small power.
These plants are used as standby sets for continuity of supply to important points such as hospitals, radio stations, cinema houses and telephone exchanges. The plant has the following auxiliaries (Major) Fuel supply system Air intake system Exhaust system Cooling system Lubricating system Engine starting system Fuel supply system
It consists of storage tank , strainers, fuel transfer pump and all day fuel tank. The oil is stored in the storage tank. From the storage tank, oil is pumped to smaller all day tank at daily or short intervals. From this tank, fuel oil is passed through strainers to remove suspended impurities. The clean oil is injected into the engine by injection pump. Air intake system
This system supplies necessary air to the engine for fuel combustion. It consists of pipes for the supply of fresh air to the engine manifold. Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder. Exhaust system
The system leads the engine exhaust gas outside the
building and discharges it into atmosphere. A silencer is usually incorporated in the system to reduce the noise level. Cooling system
The cooling system consists of a water source , pump and cooling
towers. The pump circulates water through cylinder and head jacket. The water takes away from the engine and itself becomes hot. The hot water is cooled by cooling towers and is recirculated for cooling. Lubricating system
The system minimizes the wear of rubbing surfaces of the
engine. It comprises of lubricating oil tank , pump , filter and oil cooler. The lubricating oil is drawn from the lubricating oil tank by the pump and is passed through filters to remove impurities. The clean lubricating oil is delivered to the points which require lubrication. Engine starting system
This is an arrangement to rotate the engine
initially , while starting, until firing starts and the unit runs with its own power. Compressed air is used for starting. Advantages
The design and layout of the plant are quiet simple.
It occupies less space as the number and size of the auxiliaries is small. It can be located at any place. It can be started quickly and can pick up load in a short time. There are no standby losses. It requires less quantity of water for cooling. The overall cost is much less than that of steam power station of the same capacity. The thermal efficiency of the plant is higher than that of a steam power station. It requires less operating staff Disadvantages
The plant has high running charges as the fuel (i.e., diesel) used is costly. The plant does not work satisfactorily under overload conditions for a longer period. The plant can only generate small power. The cost of lubrication is generally high. The maintenance charges are generally high. Diesel power plant in Bangladesh
German power generation manufacturer MAN Energy Solutions is supplying new diesel engines for a power plant in Bangladesh and has completed three other facilities in the nation. MAN Energy Solutions will power the plant in Chandpur with its combination of four 18V51/60TS and two 20V45/60 engines. Those engines will supply a capacity of about 125 MW into the Bangladeshi grid. The German company also handled over three power plants constructed in Bogra and Chittagong. Those together use 15 18V48/60 units combined for about 282 MW in power generation capacity. References: 1) https://www.electricalengineeringinfo.com/2014/12/diesel-power-station-or-diesel-power-plant-.html
