Unit A

Mechanical Systems and

Technology
Lesson 7

Applying Metal Inert Gas

(MIG)
Welding Techniques
 Next Generation Science/Common Core Standards Addressed!
• CCSS.ELALiteracy.RST.9‐10.1 Cite specific textual evidence to support
analysis of science and technical texts, attending to the precise details of
explanations or descriptions.

• CCSS.ELALiteracy.RST.9‐10.3 Follow precisely a complex multistep

procedure when carrying out experiments, taking measurements, or
performing technical tasks, attending to special cases or exceptions defined
in the text.

• CCSS.Math.Content.HSGCO.D.12 Make formal geometric constructions

with a variety of tools and methods (compass and straightedge, string,
reflective devices, paper folding, dynamic geometric software, etc.).
Copying a segment; copying an angle; bisecting a segment; bisecting an
angle; constructing perpendicular lines, including the perpendicular
bisector of a line segment; and constructing a line parallel to a given line
through a point not on the line.
 Agriculture, Food and Natural Resource
Standards Addressed!
• PST.01.03. Apply physical science principles to metal
fabrication using a variety of welding and cutting processes
(e.g., SMAW, GMAW, GTAW, fuel-oxygen and plasma arc
torch, etc.).

o PST.01.03.01.c. Evaluate the quality of metal fabrication procedures (e.g., SMAW,

GMAW, GTAW, fuel-oxygen and plasma arc torch, etc.).
 Bell Work!
• 1. Explain the advantages of the metal inert gas (MIG) welding
process.
• 2. Describe the equipment, types of shielding gases, and
electrodes used in the MIG welding process.
• 3. Describe the types of metal transfer patterns used in MIG
welding and relate their applications.
• 4. What are the advantages of MIG welding?
 Terms
• Spray arc transfer • Burnback
• Stickout • Ductility
• Transition current • Globular transfer
• Travel angle • Inert gas
• Whiskers • Short arc transfer
Interest Approach
• Have you heard the
term MIG Welding
• What are the
advantages of MIG
Welding?
• How is MIG Welding
done?
 What are the
advantages of the MIG
welding process?
 Metal inert gas welding (MIG) is a process in which a consumable wire

electrode is fed into an arc and weld pool at a steady but adjustable rate, while

a continuous envelope of inert gas flows out around the wire and shields the

weld from contamination by the atmosphere.

 The MIG welding process has
several advantages which account
for its popularity and increased use in
the welding industries.
MIG Welding Advantages
• A. Welding jobs can be performed faster with the MIG
process. The continuous wire feed eliminates the need
to change electrodes.
 MIG Welding Advantages
• B. Weld cleaning and preparation time is less for MIG
welding than for stick electrode welds. Since the
gaseous shield protects the molten metal from the
atmospheric gases, there is no flux or slag, and spatter
is minimal.
• C. Less time is required to teach individuals how to MIG
weld. If an individual has learned how to stick weld they
can pick up on MIG welding quickly.
 MIG Welding Advantages
• D. Because of the fast travel speed at which MIG
welding can be done, there is a smaller heat-affected
zone than with the shielded metal arc welding process.
The smaller heat-affected zone results in less grain
growth, less distortion, and less loss of temper in the
base metal.
MIG Welding Advantages
• E. Both thick and thin metals can be welded successfully
and economically with the MIG process.
• F. Less time is needed to prepare weld joints since the
MIG welds are deep penetrating. Narrow weld joints can
be used with MIG welding and still secure sound
weldments.
 MIG Welding Advantages
• G. The MIG welding process can be used to join both
ferrous and nonferrous metals. The development of
electrode wire and the use of spool guns has made the
MIG process widely used for aluminum, stainless steel,
high-carbon-steel, and alloy-steel fabrication. Simply
change the wire and shielding gas to adapt to different
types of metal.
MIG Welding Advantages
• H. The weld visibility is
generally good. There is
less smoke and fumes so
operator environment is
improved and it is easier to
see the weld formation.
What equipment, types
of shielding gases, and
electrodes are used in
the MIG welding
process?
To understand the MIG welding process, you must

understand the equipment needed. It consists of a

welder, a wire feed system, cable and welding gun

assembly, shielding gas supply, and electrode wire.

 MIG Welders
• A. Most welders used for MIG welding are direct current
machines of the constant voltage type.
• B. MIG welding machines must be designed to produce
a constant voltage. With a constant voltage MIG
machine, the output voltage will change very little with
large changes in current.
MIG Welders
• C. Welding voltage has
an effect on bead width,
spatter, undercutting, and
penetration.
• D. The constant voltage
welding machines are
designed so that when
the arc voltage changes,
the arc current is
automatically adjusted or
self-corrected.
• WFS + wire feed speed
 E. Most MIG welding units have three

adjustments which must be in balance to

achieve a quality weld. These are voltage

control, wire feed speed, and shielding gas flow

rate.
 Wire Feeder
• 1. The wire feeder continually draws a small diameter
electrode wire from the spool and drives it through the cable
assembly and gun at a constant rate of speed.
• 2. The constant rate of wire feed is necessary to assure a
smooth even arc. This must be adjustable to provide for
different welding current settings that may be desired.
 Wire Feeder
• 3. Wire speed varies with the metal
thickness being welded, type of joint,
and position of the weld.
 Wire Feeder
F. To move the electrode wire from the spool to the MIG
welding gun, run the wire through a conduit and system
of drive wheels.
• These drive wheels, depending upon their location in
the wire feed unit, are either the push type or the pull
type.
 Wire Feeder
F1. The pull-type drive wheels are located relatively
close to the MIG gun and exert a pulling action on the
wire.
• Pull-type drive wheels are used on most spool guns.
2. With the push-type drive wheels, the wire goes
through the wheels and is pushed through the
electrode lead and out through the MIG gun.
 G. Correct tension on the
wire feed drive wheels is very
important.
• 1. Too little tension results in drive wheel slippage
which causes the wire to be fed into the puddle at an
uneven rate, giving a poor-quality weld.
 G. Correct tension on the
wire feed drive wheels is very
important.
2. Too much tension on the wire feed wheels results in
deformation of the wire shape.
• This altered wire shape can make it difficult to thread
the electrode through the conduit and the contact tip
in the MIG gun.
H. When a blockage or burnback occurs, the MIG gun
should be turned off immediately to prevent
entanglement.
• A burnback occurs when the electrode wire is fused
to the contact tip.

I. The wire feeders have different sized drive rolls so they

can accommodate different sizes and types of wire.
 MIG Gun
J. The electrode holder is commonly referred to as the MIG
gun.
• The MIG gun has a trigger switch for activating the
welding operation, a gas nozzle for directing the flow of
the shielding gas, and a contact tip.
 MIG Gun
J1. The nozzle on the MIG gun directs the shielding gas over the
puddle during welding.
• A nozzle that is too large or too small may result in air from the
atmosphere reaching the puddle and contaminating the weld.
• 2. The nozzle is made of copper alloy to help remove the heat
from the welding zone.
• K. When welding outside, where the weld zone is
subjected to drafts and wind currents, the flow of
shielding gas needs to be strong enough so that drafts
do not blow the shielding gas from the weld zone.
Removal of shielding gases by the wind will lead to
contaminated, weakened welds.
L. The contact tip helps to guide the wire electrode into
the puddle as well as transmit the weld current to the
electrode wire.
• The electrode wire actually touches the contact tip as
it is fed through the MIG gun.

• During this contact, the weld current is transmitted to

the electrode. The tip must match the wire diameter
being used in the welder.
 M. Shielding Gas
The shielding gas displaces the atmospheric air with a
cover of protective gas.
• The welding arc is then struck under the shielding gas
cover and the molten puddle is not contaminated by the
elements in the atmosphere
 M. Shielding Gas
Inert and non-inert gases are used for shielding in MIG
welding.
• An inert gas is one whose atoms are very stable and will
not react easily with atoms of other elements.
 1. Argon
Has a low ionization potential and therefore creates a very
stable arc when used as a shielding gas. The arc is quiet and
smooth sounding and has very little spatter.
• a. Argon is a good shielding gas for welding sheet metal and
thin metal sections.Pure argon is also used for welding
aluminum, copper, magnesium, and nickel.
• b. Pure argon is not recommended for use on carbon steels.
 2. Helium gas
• Conducts heat well and is preferred for welding thick metal
stock. It is good for welding metals that conduct heat well, such
as aluminum, copper, and magnesium.
• a. Helium requires higher arc voltages than argon.

• b. Helium-shielded welds are wider, have less penetration and

more spatter than argon-shielded welds.

• C. Helium is quite often used along with flux cored MIG welding
wire.
 3. Carbon dioxide
The most often used gas in MIG welding because it gives good
bead penetration, wide beads, no undercutting and good bead
contour and it costs much less than argon or helium.

• a. The main application of carbon dioxide shielding gas is

welding low and medium carbon steels.
• b. When using carbon dioxide shielding gas, the arc is unstable,
which causes a lot of spatter.
 3. Carbon dioxide
• c. Carbon dioxide gas has a tendency to disassociate. At high
temperatures encountered in the arc zone, carbon dioxide will
partially break up into oxygen and carbon monoxide.

• d. Good ventilation is essential to remove this deadly gas

 4. Gas Mixtures
• Argon / Oxygen is used quite often when welding
stainless steel. The oxygen gas helps to stabilize the arc
and eliminate much of the weld splatter.
 4. Gas Mixtures
• b. An argon-helium mixture is used for welding thick non-
ferrous metals. This mixture gives the same arc stability
as pure argon with very little spatter, and produces a
deep penetrating bead.
 4. Gas Mixtures
• c. The argon-carbon dioxide mixture is used mainly for
carbon steels, low alloy steels, and some stainless steel.
The gas mixture helps to stabilize the arc, reduce
spatter, eliminate undercutting and improve metal
transfer straight through the arc.
 N. Gas Cylinder and
Gauges
• The tank supplying the shielding gas will have a gauge
and a gas flowmeter.
• The volume of gas directed over the weld zone is
regulated by the flowmeter.
 O. Electrode Wire
The selection of the correct electrode wire is an important
decision and the success of the welding operation
depends on the correct selection.
 O. Electrode Wire
There are factors to consider when selecting the correct
electrode.
• 1. Consider the type of metal to be welded and choose a
filler wire to match the base metal in analysis and
mechanical properties.
 O. Electrode Wire
2. Consider the joint design.
• Thicker metals and complicated joint designs usually
require filler wires that provide high ductility.
• Ductility is the ability to be fashioned into a new form
without breaking.
 O. Electrode Wire
3. Examine the surface condition of the metal to be welded.
• If it is rusty or scaly, it will have an effect on the type of
wire selected.
4. Consider the service requirements that the welded
product will encounter.
5. MIG welding is not effective on rusty or painted surfaces
as the lower voltage is not effective a scouring the
surface in the same manner as a stick electrode.
 P. Electrode Wire Classification
• MIG electrode wire is classified by the American Welding
Society (AWS).
• An example is ER70S6.
• For carbon-steel wire, the “E” identifies it as an electrode
• “R” notes that it is a rod

• Note – MIG wire is available in different diameters. The

diameter of the wire must match the drive wheels and
the gun tip.
 P. Electrode Wire Classification
• The first two digits relate the tensile strength in 1,000 lbs.
psi
• The “S” signifies the electrode is a solid bare wire
• Any remaining number and symbols relate the chemical
composition variations of electrodes.
 What are the types of
metal transfer patterns
used in MIG welding and
when are they used?
 Metal Transfer Patterns
• In MIG welding, the metal from the wire electrode is
transferred across the arc plasma to the puddle by
globular, short arc, or spray transfer patterns.
• The type of transfer used for any given weld depends
upon the arc voltage, current, kind of shielding gas used,
and diameter of the wire electrode.
 A. Globular Transfer
Patterns
When the molten metal from the wire electrode travels
across the arc in large droplets, it is in the globular
transfer pattern.
• 1. Globular transfer pattern occurs at low wire feed rates,
low current, and low arc volt-age settings.
 A. Globular Transfer
Patterns
• 3. The molten globules are two to three times larger than
the diameter of the electrode. Surface tension holds the
globules on the end of the wire electrode. When the
globules become too heavy to remain on the electrode,
they drop off and move across the arc. The globules do
not move across the arc in an even pattern.
 A. Globular Transfer
Patterns
• 4. Welds made with globular transfer have poor
penetration and excessive spatter and are used little in
MIG welding.
 B. Short Arc Transfer
Pattern
• is actually a series of periodic short circuits that occur as
the molten tip of the advancing wire electrode contacts
the workpiece and momentarily extinguishes the arc.
 B. Short Arc Transfer
Pattern
1. The droplet forms on the end of the electrode and begins
to sag while the arc is ignited.
• The droplet sags further and touches the molten puddle.
• When the droplet touches the puddle, the arc is short-
circuited and extinguished.
 MIG Welding
Procedures
• b. Long, coiled cables act as reactors and set up stray
magnetic fields that affect arc action.
• 2. Check that the wire type, wire size, and shielding gas are
correct for the metal to be welded.
• 3. Set the shielding gas flow rate, proper amperage, and wire
speed for the metal being welded.
 B. Short Arc Transfer
Pattern
• The droplet continues to melt and breaks off the end of
the wire electrode.
• At this instant, the arc reignites and a new droplet begins
to form.
2. New droplet formation and arc shorting may occur from
20 to 200 times per second.
 B. Short Arc Transfer
Pattern
3. Short arc transfer is also known as short circuiting
transfer and dip transfer.
• a. Short arc transfer is especially good for welding in
the horizontal, vertical, and overhead positions where
puddle control is usually hard to maintain.
• b. Short arc welding is most feasible at current levels
below 200 amps and with small-diameter electrode
wire.
 C. Spray Arc Transfer Pattern

Is a spray of very fine droplets.

• 1. Spray arc transfer is a high-heat method of welding with a
rapid deposition of metal.
• It is used for welding all common metals from 3 /32 inch to
over 1 inch in thickness.
• 2. This transfer occurs only with argon or argon-oxygen
mixture of shielding gas.
 What is the correct
technique for starting,
controlling, and stopping
an MIG weld?
 Follow proper
procedures when
starting, controlling, and
stopping an MIG weld.
 MIG Welding Procedures
A. Preparing to start welding with the MIG welder requires
you to make adjustments to the machine.
• 1. Be sure the gun and ground cables are properly
connected.
• a. If possible, attach the ground directly to the work
piece and weld away from the ground.
• b. Long, coiled cables act as reactors and set up stray
magnetic fields that affect arc action.
• 2. Check that the wire type, wire size, and shielding gas
are correct for the metal to be welded.
• 3. Set the shielding gas flow rate, proper amperage, and
wire speed for the metal being welded.
B. When ready to start
the welding process,
travel speed, stickout,
and gun angle are
important
considerations.
 MIG Welding
Procedures
1. The speed at which the arc is moved across the base
metal affects the puddle. Proper control of the puddle
provides for good penetration, with correct bead width
and bead height, and prevents undercutting.
• a. Travel speed may also affect arc stability and the
metal transfer pattern.
 MIG Welding
Procedures
• b. Travel speeds vary with the size of the electrode
wire, current density, metal thickness, weld position,
and kind of metal being fabricated.
2. The tip-to-work distance can affect weld penetration
and weld shape, and is known as stickout.
• a. Short stickout distances ( 3 /8 inch or less) are
desirable on small-wire, low-amperage applications.
 MIG Welding
Procedures
• 3. Holding the MIG gun at the correct angle is very
important since it controls shielding gas distribution,
puddle control, and bead formation. Two angles which
must be correct to make a quality weld are the travel
angle and the work angle.
 a. Travel Angle
The angle at which the MIG gun leans toward or away
from the direction of movement.
• i. A travel angle of 10 degrees to 20 degrees is used
for most welding.
• ii. Travel angle is sometimes referred to as drag
angle.
 b. The Work Angle
• Is perpendicular to the line of travel and varies
considerably, depending upon the type of weld being
made and the welding position.
• The work angle for a flat position surfacing weld
should be 15 degrees to 25 degrees.
 4. The MIG gun may be
held three different ways.

• a. Perpendicular to the
base metal.
 4. The MIG gun may be
held three different ways.
b. Leaning in the
direction of travel, also
known as the
backhand or pull
position.
 4. The MIG gun may be
held three different ways.
c. Leaning opposite the
direction of travel,
also known as the
forehand or push
position.
 C. If the weld current is
stopped instantly, the weld
puddle freezes, gases
become entrapped in the
bead, and porosity results.
 Stopping the Weld
• 1. The best stop is achieved by allowing the weld
current to taper down.
• 2. Stopping the wire feed as quickly as possible after
the MIG gun trigger is off is desirable.
• 3. Stopping the flow of shielding gas is the last thing to
be done when stopping a weld. The shielding gas
needs to flow over the puddle until it is fully solidified
How is the MIG welder
adjusted and
maintained?
 A. Most MIG machines have a voltage
adjustment in addition to the wire feed control.

• 1. Determine what the voltage should be set for the

kind and thickness of metal and the shielding gas
being used.

• 2. Fine adjustments may then need to be made so

welding occurs with the right sound, bead
penetration, shape, and contour.
 B. Check specifications to see what
the correct gas volume should be for
the weld.

• 1. Stand to one side of the regulator, open the tank

valve completely.
• 2. Adjust the flowmeter to the predetermined gas
volume.
• 3. Hold the MIG gun “on” to set to the correct
operating volume.
D. The nozzle should be kept clean and free
of spatter in order to properly direct the flow
of shielding gases over the puddle.
• 1. If filled with spatter, the nozzle may be cleaned with a
nozzle reamer or a round file. Be careful not to deform the tip
while cleaning.
• 2. Anti-spatter dip or spray may be put on the nozzle to help
prevent spatter build-up and to make cleaning easier.
E. Contact tips need to be sized to
fit the diameter of electrode wire
being used.

• 1. The current is transmitted to the wire electrode in

the contact tip.
• 2. Tips are usually threaded into the MIG gun so that
good electrical contact is made.
What are the safety
practices that are
observed in MIG
welding?
 Safety Practices and Procedures
A. Make sure that all welding cables and their connections
are in good repair.
• Do not use cables that are cracked or cut or have
damaged insulation.
• Electrical connections on each cable should be tight and
not have frayed ends or bare wires exposed.
 Safety Practices and Procedures
• B. Wear welding gloves, helmet, leather apron, welding
chaps, leather shoes, and other personal protective
equipment to help prevent weld burns.
 Safety Practices and Procedures
• C. When operating a MIG welder, never touch an
electrical connection, a bare wire, or a machine part
which may cause electrical shock.
• Never weld in damp locations because of the shock
hazard.
Safety Practices and Procedures
• D. Never weld with flammables (matches, butane
lighters, fuel stick, etc.) in your pockets.
 Safety Practices and Procedures
• E. Use pliers or tongs to handle hot metal from the MIG
welding process.
• Never leave hot metal where others may touch it and be
burned.

• F. Select the correct shaded lens for the electrode size

being used. Shades 10 and 12 are recommended.
 Safety Practices and Procedures
G. Perform all welds in a well-ventilated area.

• Welding fumes should be ventilated away from the welder,

not across the welder's face.
• Remember that shielding gases are asphyxiants, and
welding fumes are harmful.
• Work in well-ventilated areas to prevent suffocation or fume
sickness.
 Safety Practices and Procedures
H. Store inert gas cylinders in a cool, dry storage area.

• Do not drop or abuse gas cylinders in any way.

• Do not move cylinders unless the valve protection cap is
in place and tight.
• Check all connections with soapy water to detect leaks.
 Safety Practices and Procedures
I. Hang the welding gun on a hook when it is not in use.

• Do not hang it on the flow meter, regulator, or cylinder

valve.
• Do not lay the gun on the work or worktable.
 Safety Practices and Procedures
• J. Protect other workers by using a welding screen to
enclose your area. Warn persons standing nearby, by
saying “flash” or“cover”, to cover their eyes when your
are ready to strike an arc.
 Safety Practices and Procedures
K. Before starting to weld, clear the surrounding area of
possible fire hazards.
• Remove straw, shavings, rags, paper, and other
combustible materials.
 Safety Practices and Procedures

L. Be alert for fires at all times.

• Because the operator’s helmet is lowered, clothing may catch

fire without being noticed.
• Depend on your senses of touch, smell, and hearing to
indicate that something is wrong.
• In case of a clothing fire, strip off the article if possible.
 Safety Practices and Procedures

L. Be alert for fires at all times. (Cont.)

• Do not run, as running fans the flames.

• Wrap yourself in a fire blanket, or improvise with a coat or
piece of canvas.
• If there is nothing at hand to wrap in, drop to the floor and roll
slowly.
The End!