Scribd
Upload
204 views14 pages

Lesson 6 Quiz

The document defines various tractor parts and safety procedures. It provides definitions for BLOWBAGETS (the 10 items that should be checked before driving), ROPS (Roll-Over Protection Structure), PTO (Power Take-off), clutch safety switch, PTO shield, counterweight, proper gears for parking facing up or down slopes, methods for attaching 3-point linkages, and allows 10 minutes for engine oil to drain after stopping. It also lists other terms for 2-wheel tractors such as walking tractor, iron buffalo, and steel buffalo.

Uploaded by

Teptep Gonzales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
204 views14 pages

Lesson 6 Quiz

The document defines various tractor parts and safety procedures. It provides definitions for BLOWBAGETS (the 10 items that should be checked before driving), ROPS (Roll-Over Protection Structure), PTO (Power Take-off), clutch safety switch, PTO shield, counterweight, proper gears for parking facing up or down slopes, methods for attaching 3-point linkages, and allows 10 minutes for engine oil to drain after stopping. It also lists other terms for 2-wheel tractors such as walking tractor, iron buffalo, and steel buffalo.

Uploaded by

Teptep Gonzales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

1-10. What is BLOWBAGETS?

Answer
• 1. Brake
• 2. Lights
• 3. Oil
• 4. Water
• 5. Battery
• 6. Air
• 7. Gas
• 8. Engine
• 9. Tires
• 10. Self
11. What is ROPS
• Answer
• Roll-Over Protection Structure
12. What is PTO
• Answer:
• Power Take-off
13. This little device will, will not allow
the starter to engage unless you have
the clutch pedal fully depressed.

• Answer: Clutch safety switch or starter


interlock.
14. When Starting a Tractor,
Check that all gear levers are in ________,
place PTO and hydraulic levers in neutral
position-leave implements down.

Answer
• neutral
15. This little metal guard here is to
keep articles of clothing or hair or
anything like that from getting
tangled in the PTO shaft when it's
turning

• Answer
• PTO shield
16. This is what's going to protect you in the
event of an overturn .

• Answer
• ROPS
17. keep everything stable, keep the front
wheels of the tractor on the ground

• Answer
• counterweight
18. Parking the tractor
Choose the site.
if it’s necessary to park on sloping ground:
-leave in _________ gear when facing up a slope

• Answer
• forward
19. Parking the tractor
Choose the site.
if it’s necessary to park on sloping ground: -leave
in ________ gear when facing down a slope.

Answer
• reverse
• 20. In Methods in attaching the 3-point
linkage, This method  must be used when the
ground is not level or the implement has a
‘floating’ or ‘non-fixed’ head stock.

• Answer
• Method 1
• 21. To check the engine oil level the tractor must be
standing on level ground, allow approximately
__________ minutes after the engine has stopped for
the oil to drain down into the sump.

• Answer
• 10
22-25. Other terms for 2-wheel
tractors

• Answer:
• Also called the walking tractor, iron buffalo, steel
buffalo or hand tractor,

You might also like