Control Lec.

Block Diagram
References:
1. Modern control Engineering by OGATA
2. Automatic control system by KUO.
3. Control system Engineering by Norman S.
Nise.
4. http://imtiazhussainkalwar.weebly.com

Block Diagram Transformation Theorems include many rules and these rules
are:

Asst. Lec. Haraa Raheem Page 1

Control Lec. 3

Table (3.1) Block Diagram transformation theorems

Asst. Lec. Haraa Raheem Page 2

Control Lec. 3

Ex1: Find the transfer function of the following block diagrams

R + G1 G2 C R G1G2 C

- + H1

+ H2
H1+H2

R C

Ex2: Find the transfer function of the following block

diagrams

Asst. Lec. Haraa Raheem Page 3

Control Lec. 3

R C

Ex3: For the system represented by the following block diagram

determine:

1. Open loop transfer function

2. Feed Forward Transfer function
3. control ratio
4. feedback ratio
5. error ratio
6. closed loop transfer function
7. characteristic equation

Sol: First we will reduce the given block

diagram

Asst. Lec. Haraa Raheem Page 4

Control Lec. 3

K
s1

K
G
s 1
1 GH  K
1 s
s 1

B(s)  G(s)H (s)

1. Open loop transfer
E(s)
function

2. Feed Forward Transfer C (s)

function E (s)  G (s)

3.control ratio
C(s  G(s)
)
R(s 1 G(s)H
) (s)

B(s) G(s)H (s)

4. feedback ratio 
R(s) 1 G(s)H ( )
(s) ( )

E(s  1
5. error ratio )
R(s 1 G(s)H
) (s)
Asst. Lec. Haraa Raheem Page 5
Control Lec. 3

C(s  G(s)
6. closed loop transfer )
function R(s 1 G(s)H
) (s)
7. characteristic 1 G(s)H (s) 
equation
0

Ex4: Find the transfer function of the following block diagrams

Asst. Lec. Haraa Raheem Page 6

Control Lec. 3

Ex5: Reduce the Block

Diagram

Asst. Lec. Haraa Raheem Page 7

Control Lec. 3

H.W1: Find the transfer function of the following block

diagrams

H.W2: Simplify the block diagram then obtain the close-loop transfer function
C(S)/R(S).

Multiple Input System

EX1: Determine the output C due to inputs R and U using the Superposition
Method

sol: according to the principles of superposition, then, we must try to find the o/p
considering one i/p at time

Asst. Lec. Haraa Raheem Page 8

Control Lec. 3

Asst. Lec. Haraa Raheem Page 9

Control Lec. 3

Multi-Input Multi-Output System

Ex1: Determine C1 and C2 due to R1 and R2.

Asst. Lec. Haraa Raheem Page 10

Control Lec. 3

When R1 = 0

When R2 = 0

Asst. Lec. Haraa Raheem Page 11

Control Lec. 3

Signal Flow Graphs

The block diagram is useful for graphically representing control system dynamics and
is used extensively in the analysis and design of control systems. An alternate
approach for graphically representing control system dynamics is the signal flow graph
approach, due to S.
J. Mason. It is noted that the signal flow graph approach and the block diagram
approach yield the same information and one is in no sense superior to the other.

Definitions: Before we discuss signal flow graphs, we must define certain terms:
 Node: A node is a point representing a variable or signal.
 Transmittance: The transmittance is a real gain or complex gain between two nodes.
Such gains can be expressed in terms of the transfer function between two nodes.
 Branch: A branch is a directed line segment joining two nodes. The gain of a branch
is a transmittance.
 Input node or source: An input node or source is a node that has only
outgoing branches.
 Output node or sink: An output node or sink is a node that has only
incoming branches.
 Mixed node: A mixed node is a node that has both incoming and outgoing branches.
 Path: A path is a traversal of connected branches in the direction of the branch
arrows.
 Loop: A loop is a closed path.
 Loop gain: The loop gain is the product of the branch transmittances of a loop.
 Non touching loops: Loops are nontouching if they do not possess any common
nodes.
 Forward path: A forward path is a path from an input node (source) to an output
node (sink) that does not cross any nodes more than once.
 Forward path gain: A forward path gain is the product of the branch transmittances of
a forward path.

Figure (3.1) Signal flow graph

Asst. Lec. Haraa Raheem Page 12

 Control Lec. 3

Signal Flow Graph Algebra

A signal flow graph of a linear system can be drawn using the foregoing definitions.
In doing so, we usually bring the input nodes (sources) to the left and the output nodes
(sinks) to
the right. The independent and dependent variables of the equations become the input
nodes (sources) and output nodes (sinks), respectively. The branch transmittances can be
obtained from the coefficients of the equations. To determine the input-output
relationship, we may use Mason's formula, which will be given later, or we may reduce the
signal flow graph to a graph containing only input and output nodes. To accomplish
this, we use the following rules:
1. The value of a node with one incoming branch, as shown in Figure 3-1(a), is x2 =
ax1.

2. The total transmittance of cascaded branches is equal to the product of all the
branch transmittances. Cascaded branches can thus be combined into a single
branch by multiplying the transmittances, as shown in Figure 3-1(b).

3. Parallel branches may be combined by adding the transmittances, as shown in

Figure 3-1(c).

4. A mixed node may be eliminated, as shown in Figure 3-1(d).

5. A loop may be eliminated, as shown in Figure 3-1(e). Note that x3 = bx2, x2 = ax1 + cx3

Figure 3-2 Signal flow graphs and

simplifications
Asst. Lec. Haraa Raheem Page 13
 Control Lec. 3

Hence x3 = abx1+bcx3 (1)

x3= (2)
Equation (1) corresponds to a diagram having a self-loop of transmittance bc. Elimination of
the self-loop yields Equation (2), which clearly shows that the overall transmittance is ab/(l - bc).

Signal Flow Graphs of Control Systems:

Some signal flow graphs of simple control systems are shown in Figure 3-2. For such
simple graphs, the closed-loop transfer function C(s)/R(s)[ or c(s)/N(s)]can be obtained
easily by
inspection. For more complicated signal flow graphs, Mason's gain formula is quite useful.

Figure 3-3 Block diagrams and corresponding signal flow

graphs

Asst. Lec. Haraa Raheem Page 14

 Control Lec. 3

Mason's Gain Formula for Signal Flow

Graphs

The block diagram reduction technique requires successive application of

fundamental relationships in order to arrive at the system transfer function. On the other
hand, Mason’s rule for reducing a signal-flow graph to a single transfer function requires
the application of one formula. The formula was derived by S. J. Mason when he related
the signal-flow graph to the simultaneous equations that can be written from the graph.

The transfer function, C(s)/R(s),n of a system represented by a signal-flow graph

is: C (s)  Pi
 
R (s) 
i i 1

Where

n = number of forward paths.

Pi = the i th forward-path gain.

∆ = Determinant of the system or is a series of summation of the untouched loops

∆i = Determinant of the ith forward path

∆ is called the signal flow graph determinant or characteristic function

∆ = 1- (sum of all individual loop gains) + (sum of the products of the gains of all
possible two loops that do not touch each other) – (sum of the products of the gains of all
possible three loops that do not touch each other) + … and so forth with sums of higher
number of non-touching loop gains

∆i = value of Δ for the part of the block diagram that does not touch the i-th forward path
(Δi
= 1 if there are no non-touching loops to the i-th path.)

Solution steps by Mason's rule

1. Calculate forward path gain Pi for each forward path i.

2. Calculate all loop transfer functions
3. Consider non-touching loops 2 at a time
4. Consider non-touching loops 3 at a time
5. Etc
Asst. Lec. Haraa Raheem Page 15
 Control Lec. 3

6. Calculate Δ from steps 2,3,4 and 5

7. Calculate Δi as portion of Δ not touching forward path i
Example1: Apply Mason’s Rule to calculate the transfer function of the system represented by following
Signal Flow Graph

Therefore C P   P2 
 1 1
R 2 

There are three feedback loops

L1  G 1G 4 H 1 , L2   G1G 2 G 4 L3  G 1G 3 G 4
H 2 , H 2

There are no non-touching loops, therefore

∆ = 1- (sum of all individual loop gains)

  1  L1  L2  L3 

  1  G1G 4 H 1  G1G 2 G 4 H 2  G1G 3 G 4 H 2


∆1 = 1- (sum of all individual loop gains) ∆1 = 1
Eliminate
+... forward path-1

Eliminate forward path-2

∆2 = 1- (sum of all individual loop gains) ∆2 = 1
+...

Asst. Lec. Haraa Raheem Page 16

Control Lec. 3

Example-2: Determine the transfer function C/R for the block diagram below by
signal flow graph techniques.

Sol:

• The signal flow graph of the

above block diagram is
shown below.

• There are two forward paths.

The path gains are

• The three feedback loop gains

are

L1= -G2H1, L2= G1G2H1, L3= -G2G3H2

• No loops are non-touching, hence

  1 L1  L2  L3 
Because the loops touch the nodes of
P1, hence

Since no loops touch the nodes of P2,

therefore Hence the control ratio T = C/R is:

Asst. Lec. Haraa Raheem Page 17

Control Lec. 3

Example-3: Find the control ratio C/R for the system given below.

Sol:
• The signal flow graph is shown in the
figure.

• The two forward path gains are

• The five feedback loop gains are

L1= G1G2H1, L2= G2G3H2, L3=

-G1G2G3, L4= G4H2, L5=-G1G4

There are no non-touching

  1  L1  L2loops,
 L3 hence
 L4  L5 = 1- G1G2H1- G2G3H2+ G1G2G3- G4H2+ G1G4
 feedback loops touches the two forward paths,
All

hence Hence the control ratio :

Asst. Lec. Haraa Raheem Page 18

Control Lec. 3

H.W 1: Find the control ratio C/R for the system given below by signal flow
graph techniques.

H.W 2: Find the control ratio C/R for the system given below by signal flow
graph techniques.

Asst. Lec. Haraa Raheem Page 19

Control Lec. 3

Example 4: Apply Mason’s Rule to calculate the transfer function of the system
represented by following Signal Flow Graph

Sol:

1.Calculate forward path gains for each

forward path.

P1  G1G2G3G4 (path 1) and P2 

G5G6G7G8 (path 2)

2. Calculate all loop gains.

L1  G2 H 2 , L2  H3G3 , L3  G6 H6 ,
L4  G7 H7
L1L3 L1L4
3. Consider two non-touching loops.
L 2 L 4 L 2 L3
4. Consider three non-touching

loops. None.

5. Calculate Δ from steps 2,3,4.

  1  L1  L2  L3  L4  L1 L3  L1 L4  L2 L3  L2 L4 
  1  G 2 H 2  H 3 G 3  G 6 H 6  G 7 H 7  
G 2 H 2 G 6 H 6  G 2 H 2 G 7 H 7  H 3 G 3 G 6 H 6  H
3 G 3 G 7 H 7 

 1  1  L 3  L 4 
 1  1  G 6 H 6  G7 H 7 

 2  1  L 1  L 2 
 2  1 G2 H 2  G3 H 3 

Asst. Lec. Haraa Raheem Page 20

Control Lec. 3
Y (s) P1   P2
 1

R (s)  2 

Y(s) G1G2G3G4 1  G6 H6  G7 H7  G5G6G7G8 1  G2 H 2 

R(s) 1  G2 H2  H3G3  G6 H6  G7 H7  G2 H2G6 H6  G2 H2G7 H7  H3G3G6 H6 
H3H
G G3G7 H7
3 3

Example 5: Apply Mason’s Rule to calculate the transfer function of the
system represented by following Signal Flow Graph

Sol:

P1  A32 A43 A54 A65 A76

P2  A7 2
P3  A42 A54 A65 A76

two non-touching
loops:

Three non-touching
loops:

Asst. Lec. Haraa Raheem Page 21