Air Cooled Condenser
Air Cooled Condenser
Air Cooled Condenser
Ltd
Heat Exchanger Manufacturers
Administrative Office:
6 J/2, Palaniyappa Layout,
Madukkarai Road, Near Old Dinamalar Office,
Sidco (PO), Coimbatore - 641 021.
Tamilnadu. INDIA
Air Cooled Condenser PPT
We are JC Equipments Pvt Ltd INDIA manufacturers of Air
Cooled Condenser system for all types of Thermal Power
plants, Gas Plants and Oil Plants. We are certified ISO and
AMSE company with more experience in HE Industry.
Air Cooled Condenser Videos Air Cooled Condenser PPT of Air cooled Condenser
Air Cooled Condenser Power Plant PDF Air Cooled Condenser Calculations PDF
Tubes are assembled in the tube bundle by triangular pitch pattern. All the carbon
steel tubes are wounded with LL type fins. The material of Tubes and fins are SA
179 and Aluminum. If the plant is affected by negative minimum design metal
Temperature. Impact tested or Stainless steel construction will be used for Tube
Bundle. All assembled tube bundles are mounted in the 'A' frame for the active
utilization of tube bundles in Heat transfer.
Tube Bundle, A frames, Fan, Motor, and gear boxes will be under civil
construction. The outlet of the condensers, i.e. condensates is collected in the
Condensate storage tank. Non condensable gases are collected through the
separate pipe line and connected to the Inter and after condensers.
Construction of Air cooled Condensers :
The construction of the Air cooled condensers are based on the API – 661
standards and ASME Sec VIII Div 1. Also as per client location and operation mode
the standards will be followed in the construction. The welding procedures
followed in the fabrication will be approved by Authorized Inspector, for each and
every jobs.
The qualification of welders been tested using ASME Sec IX. The fabrication
activities are controlled by the qualified Quality Control Team.
Quality Control Manuel is followed in each stage of Design and Manufacturing of
Condensation system. Which is approved by ASME team leader and our
Authorized Inspector. All the Products manufactured in JC Equipments Pvt Ltd are
qualified to make U stamping.
Above spare lines also have required valves for operation. By this way the
continuous operation of Condensation system is ensured by JC Equipments Pvt
Ltd.