Scribd
Upload
73 views14 pages

Land Based Wireless Network

The document summarizes land based wireless networks. It discusses two main types: packet radio networks and cellular services. Packet radio networks break data into packets that are transmitted via radio towers and forwarded to the proper address. Cellular services use a grid of transmitters and receivers within each cell to handle signals and allow communication as the user moves between cells. The document provides details on how each system works and their advantages and disadvantages.

Uploaded by

Snehanshu Pandey
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
73 views14 pages

Land Based Wireless Network

The document summarizes land based wireless networks. It discusses two main types: packet radio networks and cellular services. Packet radio networks break data into packets that are transmitted via radio towers and forwarded to the proper address. Cellular services use a grid of transmitters and receivers within each cell to handle signals and allow communication as the user moves between cells. The document provides details on how each system works and their advantages and disadvantages.

Uploaded by

Snehanshu Pandey
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

SHRI VAISHNAV INSTITUTE OF

MANAGEMENT
PRESENTATION
ON
LAND BASED WIRELESS NETWORKS

GUIDED BY SUBMITED BY
Sir. Ajay malpani Snehanshu pandey
MBA, Sem-I
Section- A
CONTENTS
INTRODUCTION

TYPES OF LAND BASE WIRELESS SYSTEM

DEFINATIONS

HOW IT WORKS

ADVANTAGES

DISADVANTAGES
LAND BASED WIRELESS
NETWORK
A land based network refers
to the network that can
transmit informati on through
towers(land based) or any
other land based
infrastructure that can
facilitate the need of
transmission .
Land based wireless network can classified in
two type.

 Packet radio network

Cellular services
Packet radio network

Packet radio is a communication method that

transmits ‘packets’ of data over a network

via RF signals.
HOW IT WORK
A special transceiver known as an RF modem
breaks down data into pieces or packet. They
picked by radio tower and forwarded to the
proper address. If a packet is not received in
good condition, the received service
automatically ask the sending modem to
resend the missing or corrupted packets.
ADVANTAGES

a. Transmission cost are based on data packets, not


connected time

b. There is no roaming charges.

c. Transmissions are digitally encoded for greater


security than cellular communication offers.
DISADVANTAGES

a. Communication is slow.

b. Radio modem can be used only with e-mail


applications. There is no fax capability.

c. Radio modem are expensive and bulky.


CELLULAR SERVICES
In cellular services communication takes place
through a grid of transmitters and receivers
(transceivers), each one called cell. A signal
from a cellular handset is handled by the
nearest cell.
Frequencies are divided into cell
bands with a buffer zone to prevent jamming of
neighboring cells frequencies.
HOW IT WORKs

Log-on

a. Each cellular handset is assigned a unique identity or numeric


arrangement module(NAM)

b. This identity is based on its home area.

c. As mobile moves across cells it continuously send msg to mobile


telephone switching office(MTSO) to confirm its location.
MONITORING
Once the handset is power on, it
started getting information from local paging
channels. It select an available channel and
goes into an ideal state. In the ideal state it
liento the data be transmitted over the
channel.
INCOMING CALLS
When incoming call is
received by the MTSO(mobile telephone
switching office). It send the signal to all the
cell in that traffic area. The set received signal
and respond to the MTSO. The MTSO will
inform the set to use specific channel to
receive the call.
OUTGOING CALLS
To make a call, the user enter
the telephone number and transmit it to
MTSO by an available access channel.
THANK YOU

You might also like