INTERNSHIP PRESENTATION
CRR PRESS TECH
(MANUFACTURER IN PRESS PARTS)
SUBMITTED BY
TEJAS P N
1KS17ME441
MECHANICAL ENGG
KSIT
CONTENTS
• ABOUT THE COMPANY
• PRESS MACHINES
• PRESS TOOLS
• PRESS OPERATIONS
• INSPECTIONS AND QUALITY CHECKING
• PRESS PARTS
• CONCLUSION
ABOUT THE COMPANY
• CRR PRESS TECH, The company registered under the small
scale industries , the company is established in year 2016 by
Mr. Rakesh c. and it is located in doddaballapura main road,
Bangalore and Mr. Rakesh c is basically tool and die maker
• Thecompany specializes in sheet metal components, CRR
PRESS TECH is mainly working on the assembly parts
Major customers:
1. Suprajith engineering Limited.
2. Alpha systems.
3. Wind duct Pvt.Limited
4. NIMS Pvt.Ltd
5. Benaka Metals
6. Rittal india Pvt. Ltd
PRESS MACHINES
PP/80T/01 PP/63T/02 PP/60T/04 PP/63T/0
5
Description Specification Description Specification
Make: AMTEEP
Make: WASINO
Tonnage: 63 TON
Tonnage: 60 TON
Bed size: 800X450 MM
Bed size: 800X400 MM
Capacity: 5 HP MOTOR Capacity: 5 HP MOTOR
PRESS MACHINE
• Press machine is a metal forming machine tool. which is designed to form
the or cut metal by applying mechanical force or pressure. With the help of
a press machine , you can form metal in any shape without removal the
chips. The presses are exclusively intended for mass production
• The main advantage of using these types of machine is that they are the
fastest and most efficient way to form any sheet metal into finished product
Classification of press machines. PRESS
MECHANICAL HYDRAULIC PNEUMATIC
HAND OPERATED POWER
(Fly press)
SINGLE ACTION DOUBLE ACTION TRIPPLE ACTION
(1 SLIDE/RAM) (2 SLIDE/RAM) [3SLIDE/RAM)
A) BLANKING A) DRAWING A) REDRAWING
OPERATION
B) PIERCING
B) DEEP DRAWING B)FINE BLAKING
C) FORMING
D) BENDING
PRESS TOOLS
• Press tool is device used to produce similar sheet metal
components of desired shape of desired shape and size .
• Die contours are made according to shape of the components
required. Die will be a female member and punch will be a male
member. These two halves are aligned and pressed under force.
Press working forces are setup guided and controlled in machine
referred as “PRESS”
There are three types of press tool.
o Progressive tool
o Compound tool
o Combination tool
o Progressive tool
progressive tool are the press tools in which
two or more than two stations are incorporated. Under each
station, one or more operation will takes place. In these tools
the strip must move from first stage to the last stage to
produce a complete components
o Compound tools
Compound tools are press tools in which
two or more cutting operations take place in the same station,
usually blanking and piercing compound tools are used to
produce blank components with pierced holes to very close
dimensional accuracy and flatness
o Combination tool
A combination tool is a contrivance in
which in cutting and non-cutting operation takes place in
In addition to piercing and blanking, various other
shearing & non-shearing operation can be carried out
in press tools. They are
SHEARING PRESS NON-SHEARING PRESS
TOOLS TOOLS
• Blanking • Bending
• Piercing • Flanging
• Parting off • Coining
• Lancing • Embossing
• Cut-off • Forming
• Notching • Drawing
• Shaving • Curling etc..
• Trimming etc..
PRESS OPERATIONS
DEFINATIONS OF OPERATIONS
• BLANKING
It is the operation of cutting flat shape from the sheet metal is called blanking
operation
• PIERCING
This is same process as blanking. In this process the holes are cut by press machine
• NOTCHING
In the notching process the material is removed from the edges of the specimen
• TRIMMING
This process is to remove the extra unwanted material from a drawn component
• BENDING
In this operation the sheet metal is pressed to bend at an angle
• DRAWING
It is the process of changing the blanked part into hallow vessel
INSPECTION
Inspection means the measurement of the quality of the
product or the utility in terms of standards, the quality must be
specified in terms of strength, surface finish, dimensional
accuracy, chemical composition and functional requirements.
Every part of a tool should undergo stage by
stage inspection in each manufacturing
METHODS OF INSPECTIONS
• DEPTH INSPECTION
• LENGTH INSPECTION
• DIAMETER INSPECTION
INSPECTION CAPABILITIES
• Height gauge -600mm
• Digital Vernier caliper -200mm,
• Micrometer -0-25mm
• Surface table -100*100mm
PRESS PARTS
CONCLUSION
THANK YOU
