Computer - Random Access Memory: Prepared By: Kenneth Santiago Sarboda
Computer - Random Access Memory: Prepared By: Kenneth Santiago Sarboda
ACCESS MEMORY
Prepared by:
Kenneth Santiago Sarboda
RAM(Random Access Memory) is the internal memory of
the CPU for storing data, program and program result.
It is read/write memory which stores data until the
machine is working.
As soon as the machine is switched off, data is erased.
Access time in RAM is independent of the address that is,
each storage location inside the memory is as easy to reach
as other locations and takes the same amount of time.
Data in the RAM can be accessed randomly but it is very
expensive.
RAM is volatile, i.e. data stored in it is lost when we
switch off the computer or if there is a power failure.
RAM is small, both in terms of its physical size and in
the amount of data it can hold.
RAM is of two types
Static RAM (SRAM)
Dynamic RAM (DRAM)
Static RAM (SRAM)
The word static indicates that the memory retains
its contents as long as power is being supplied.
SRAM chips use a matrix of 6-transistors and no
capacitors.
Transistors do not require power to prevent leakage, so
SRAM need not have to be refreshed on a regular basis.
Characteristic of the Static RAM
It has long life
There is no need to refresh
Faster
Used as cache memory
Large size
Expensive
High power consumption
Dynamic RAM (DRAM)
DRAM, unlike SRAM, must be continually refreshed
in order to maintain the data.
This is done by placing the memory on a refresh
circuit that rewrites the data several hundred times per
second.
DRAM is used for most system memory because it is
cheap and small.
All DRAMs are made up of memory cells which are
composed of one capacitor and one transistor.
Characteristics of the Dynamic
RAM
It has short data lifetime
Need to be refreshed continuously
Slower as compared to SRAM
Used as RAM
Lesser in size
Less expensive
Less power consumption