Sliding Door: Construction and Materials

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 15
At a glance
Powered by AI
The passage discusses the different types of sliding doors, their history, components, and installation/operation.

The main types of sliding doors discussed are bypass sliding, surface sliding, pocket sliding, and bifold sliding doors.

The main components of a sliding door are the track, hangers or rollers, and door gears/mechanism.

Sliding Door

C ONSTRUCTION AND M ATERIALS

S UBM ITT ED TO: AR. S ACHIN


S ING H
S UBM ITT ED BY: CHANDAN GUP TA
Sliding Doors
A SLIDING DOOR IS A TYPE OF DOOR WHICH OPENS HORIZONTALLY BY
SLIDING,WHEREBY THE DOOR IS EITHER MOUNTED ON OR SUSPENDED
FROM A TRACK.
History
SLIDING DOOR WERE USED AS
EARLY AS THE FIRST CENTURY
CE IN ROMAN HOUSES AS
EVIDENCE BY ARCHAEOLOGICAL
FINDS IN POMPELI, ITALY.
IN HISTORY OF SLIDING DOOR
IT MAY HAVE CAME FROM THE
ROMAN AND EUROPEIN
COUNTRIES IN KERALA
BOUNDRY GATE HAD SLIDING
MECHANISM.
Top Sliding Door
Hun Gears
g THE MECHANISM USED TO OPERATE A
SLIDING DOOR IS CALLED DOOR GEAR.

Sliding
Door
Gears
Lift- Botto
and- m
slide
door Railin
gear g
Top Hung
The 'top hung' system is most often used. The door
is hung by two trolley hangers at the top of the door
running in a concealed track; all the weight is taken
by the hangers, making the door easier to move.

At each end is a track stopper to absorb any impact


made if the door is slammed and to hold the door in
the open or closed position.
As the door is hung at the top from two points, it
also needs a bottom track/stay roller to prevent it
from swinging sideways.
 The most common type is called 'clear threshold guiding', a
floor-fixed plastic guide about 60mm wide which is fixed below
the door at the midpoint of its run. A groove is cut into the
bottom of the door which runs over this guide, preventing lateral
movement of the door. With a glass door the panel runs through
the guide as illustrated. Because the door is always engaged in
the guide, when the door is open the floor is clear, hence 'clear
threshold'.
Bottom Railing
Sometimes a top hung system cannot be
used, as the weight of the door cannot be
supported from above; in this case a
bottom rolling system is recommended.

A bottom rolling system consists of two


rollers (sometimes called a sheave) at the
bottom of the door running on a track and two
guides at the top running in a guide channel.
As all the weight of the door is concentrated
on the two bottom wheels, more force is
needed to move the door than on a top hung
system.;
Lift-and-slide door gear
A sliding door that is lifted from the frame during opening and closing is called a
lift-and-slide door. This allows for a better seal, with less draught and better sound
proving.
Types of Sliding Door
BYPASS SLIDING
SURFACE SLIDING
POCKET SLIDING
BIFOLD DOORS
Bypass Sliding
• Doors Slide on overhead track and along guides or
track on the floor .

• Requires no operating space but is difficult to seal


against weather and sound.

• Offers access only through 50% of doorway width .

• Used on exterior as sliding glass door.

• Used in interiors primarily for visual screening.


Surface Sliding

SIMILAR TO A BYPASS SLIDING DOOR BUT


PROVIDE ACCESS THROUGH FULL WITH OF
DOORWAY.

NO OPERATING SPACE REQUIRED BUT IS


DIFFICULT TO WEATHERPROOF.

DOOR IS SURFACE-HUNG ON AN EXPOSED


OVERHEAD TRACK.
Pocket Sliding

DOOR SLIDES ON AN OVERHEADTRACK


INTO AND OUT OF A RECESS WITH IN THE
WIDTH OF A WALL.
DOORWAY HAS FINISHED APPEARANCE
WHEN FULLY OPEN .
USED OFTEN WHERE A NORMAL DOOR
SWING WOULD INTER FACE WITH THE USE
OF A SPACE.
Bifold Sliding
HINGED DOOR PANELS FOLD FLAT AGAINST
ONE ANOTHER WHEN OPENED .
BIFOLD DOORS DIVIDE INTO TWO PARTS,
REQUIRE LITTLE OPERATING SPACE , AND
ARE USED PRIMARILY AS A VISUAL SCREEN
TO ENCLOSE CLOSET AND STORAGE SPACES.

ACCORDION DOORS ARE MULTILEAFED


DOORS THAT ARE USED PRIMARILY TO
SUBDIVIDE INTERIOR SPACES .
Conclusion
SLIDING DOOR ARE EASY TO USE AND HANDEL

SLIDING DOOR ARE EASY TO INSTALL

SLIDING DOOR CAN BE USE FOR SMALL AS WELL AS LARGE SPAN OPENING

IT IS COSTLY TO INSTALL THIS DOORS THAN NORMAL PANEL DOOR

NORMAL SLIDING DOOR OCCUPY HALF THE AREA OF OPENING BUT IN THIS CASE
POCKET, SURFACE AND BIFOLD DOORS CAN BE USE
THANK
YOU

You might also like