Scribd Logo
Upload

Welcome to Scribd!

  • 171 views

    Updata & ISP SOP

    Uploaded by

    Ankur
    This document provides instructions for updating various components on an MP tool board, including updating the WT6563 firmware, flashing the K310 chip, updating HDCP, and updating the VGA and HDMI EDID settings. It describes connecting the tool board to a PC and system board, and running software to verify, program, write, or read data for the different update procedures.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd

    Updata & ISP SOP

    Uploaded by

    Ankur
    171 views15 pages
    This document provides instructions for updating various components on an MP tool board, including updating the WT6563 firmware, flashing the K310 chip, updating HDCP, and updating the VGA and HDMI EDID settings. It describes connecting the tool board to a PC and system board, and running software to verify, program, write, or read data for the different update procedures.

    Copyright

    © © All Rights Reserved

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for updating various components on an MP tool board, including updating the WT6563 firmware, flashing the K310 chip, updating HDCP, and updating the VGA and HDMI EDID settings. It describes connecting the tool board to a PC and system board, and running software to verify, program, write, or read data for the different update procedures.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    171 views15 pages

    Updata & ISP SOP

    Uploaded by

    Ankur
    This document provides instructions for updating various components on an MP tool board, including updating the WT6563 firmware, flashing the K310 chip, updating HDCP, and updating the VGA and HDMI EDID settings. It describes connecting the tool board to a PC and system board, and running software to verify, program, write, or read data for the different update procedures.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    of 15

    MP tool board

    Updata & ISP SOP


    2008/01/28
    Max Lee
    Updata Item
     Updata WT6563 F/W
     K310 Flash
     HDCP
     VGA EDID
     HDMI EDID

    2
    Himax Proprietary & Confidential
    Board explain
    RS232 cable to PC
    USB cable to PC VGA input from
    pattern generate

    I2C

    Uart

    HDMI cable to system board VGA cable to system board


    HDMI connector (EDID) VGA
    3 connector (EDID &
    Himax Proprietary & Confidential ISP)
    Updata WT6563
     Run wt6563_download.exe
     USB plug in to MP tool usb connector
     Push Re-connect button,WT6563 Found is connected OK

    4
    Himax Proprietary & Confidential
    Updata WT6563
     Push Verify button, select WT6563.hex file
     Verify Completed is updata finish

    5
    Himax Proprietary & Confidential
    MCU
     TV ON or standby mode
     Tool board seting as below

    RS232 cable to PC
    USB cable to PC

    VGA cable to system board


    VGA connector

    6
    Himax Proprietary & Confidential
    MCU
    1. Select system=>Weltrend USB
    2. Select 8051 ISP
    3. Select F/W File
    4. Select port
    5. F/W ISP select One-touch Program
    6. H/W ISP select Program

    7
    Himax Proprietary & Confidential
    K310 Flash
     TV ON or standby mode
     Tool board seting as below

    RS232 cable to PC
    USB cable to PC

    VGA cable to system board


    VGA connector

    8
    Himax Proprietary & Confidential
    K310 Flash
    1. Select UART SPI
    2. Select F/W File
    3. Select port & Speet
    4. Program
    5. Power ON/OFF

    9
    Himax Proprietary & Confidential
    HDCP
     TV ON or standby mode
     Tool board seting as below

    RS232 cable to PC
    USB cable to PC

    VGA cable to system board


    VGA connector

    10
    Himax Proprietary & Confidential
    HDCP
     Select UART SPI
     Select updata File
     Select port & Speet
     Program
     Power ON/OFF

    11
    Himax Proprietary & Confidential
    VGA EDID
     TV ON or standby mode
     Tool board seting as below

    USB cable to PC

    VGA cable to system board


    VGA connector

    12
    Himax Proprietary & Confidential
    VGA EDID
     Select EDID
     Select VGA DEID updata File
     Key Year & Week
     Write
     Read 128 check EEPROM Data (option)

    13
    Himax Proprietary & Confidential
    HDMI EDID
     TV ON or standby mode
     Tool board seting as below

    USB cable to PC

    HDMI cable to system


    14
    board
    Himax Proprietary & Confidential HDMI connector
    HDMI EDID
     Select EDID
     Select HDMI DEID updata File
     Key Year & Week
     Write
     Read 256 check EEPROM Data (option)

    15
    Himax Proprietary & Confidential

    You might also like