Scribd
Upload
2K views2 pages

Ios Android: Matters Needing Attention

1. The document provides instructions for configuring and using a home security camera. 2. It outlines two connection modes for configuring WiFi: Smart Add mode which uses voice prompts, and Hotspot Connection mode which uses the camera as a wireless access point. 3. The document also provides brief instructions for downloading the app, adding additional cameras, and describes some of the app's software functions like playback, settings, and alarm notifications.

Uploaded by

Lau Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2K views2 pages

Ios Android: Matters Needing Attention

1. The document provides instructions for configuring and using a home security camera. 2. It outlines two connection modes for configuring WiFi: Smart Add mode which uses voice prompts, and Hotspot Connection mode which uses the camera as a wireless access point. 3. The document also provides brief instructions for downloading the app, adding additional cameras, and describes some of the app's software functions like playback, settings, and alarm notifications.

Uploaded by

Lau Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Connection

1.Power mode 1 ： Smart Add


on,waiting
for voice prompt
Neye3C User Manual
[Please configure
WiFi].Start to config
APP Down load ure WiFi when the
indicator is in a flash
⮚ Search for Neye3C on
state.
App Store or scan QR 2 Note: If the indica
tor flashes slowly,
code on the right to
please long press
download App the 【 Reset 】 button
IOS Android for 2s. And start to
configure till get the 4. Input WiFi 8. Connect
voice 1. Click 【 + 】 2. Click 【 Smart 3. Click password 5. Click [Config] 6. Click new device ID 7. Click 【 OK 】 successfully
prompt 【 Please Add 】 【 NEXT 】
Matters needing attention Connection
configure mode 2 ： Hotspot Connection
WiFi 】

1.Please use the original power supply of the product. Do not


connect or disassemble the equipment by yourself.
2. Please format the TF card when using this product for the
first time.
3. Please make sure the SSID and password are only english
letters and numbers.
4.This product does not support 5G signal for the time
being.Please reconnect the 2.4G signal to configure.
5. Install the camera in the location where the network signal is
good, to prevent the device network failure.
6. The initial password of the device is 123456, please modify
the password as soon as possible according to the prompt. 2. Click 【 Hostpot 4. Input WiFi 7. Click [Config 9. Connect
1. Click 【 + 】 Connection 】 password 5. Connect Hostpot 6. Network] 8. Click 【 OK 】 successfully
3.
Add the device to the second phone Software Functions Blue indicator state

SP1X, for example


Indicator state
description
1. Flash: waiting for
configuration
2. Slow flash: not
connect network
3. Always on:
3. Click 1.Registered and 3.The software
2.Check the connected network
1.Click on the QRCode
【 Add Manually 】 4. Click 【 QRCode 】 5. Scanning QRCode 6. Click 【 OK 】 log in 2.The device list settings 4.Device Settings 5.Preview

Record and Alarm Settings Video playback Alarm Setting

This manual is for reference, the final interpretation right


belongs to our company, the product is updated in real
time, if there is an upgrade, we will not notice.

1.Full day 2.Humanoid 3 Time period and 4.Custom alarm 3.Mobile phone
recording 、 、 detection settings trigger settings sound 1.Playback 2.Select the date 1.Turn on AI Detector 2.Turn on Notify alarm push

You might also like