Ipv4 DATA GRAM

Network Layer:
IPV4 Datagram
20.1 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
20-2 IPv4
The Internet Protocol version 4 (IPv4) is the delivery

mechanism used by the TCP/IP protocols.
Topics discussed in this section:

Datagram
Fragmentation
Checksum
Options
20.2
Figure 20.4 Position of IPv4 in TCP/IP protocol suite
20.3
Note
IPv4 is an unreliable and connectionless

datagram protocol – a best effort
delivery
Best effort means that IPv4 provides no
error control (except for error detection
on the header) or flow control
IPv4 does its best to get a transmission
through to its destination, but with no
guarantees
20.4
Figure 20.5 IPv4 datagram format
Payload
Options + padding ( 0 to 40 bytes)
20.5
IPV packet has arrived with the
first few hexa decimal digits as
shown…
45000028000100000102….
45000028
00010000
0102….
20.6
IPv4 Datagram Format
 Version (VER): version of the IP protocol.
Currently, the version is 4.
 Header length (HLEN): the total length of the
datagram header in 4-byte words.
 Length of the data gram header is divided by 4 and
inserted in this field
 4 5 000028
 4- version IPV 4
 5 – Length in 4 bytes.. 5 x 4 = 20 bytes
 Is option present or not?
20.7
 Service Type (8 bits): service type or

differentiated services
 Class based QoS model for IP
 Packets are marked by applications into classes
according to their priorities
 8 bit DS field containing DSCP and CU
 DSCP : Differentiated Services Code Point (6 bits)
 45000028 - what is DSCP here?
20.8
 Total length: total length (header plus
data) of the datagram in bytes.
 Total length of data = total length – (HLEN x 4)
 IP datagram e.g. : 4500 0028
 Length : (0028)16 = (40) 10
 Total length of packet= 40 bytes
 What is the length of data?
20.9
 Identification (16 bits): used in fragmentation (discussed
later).
 Flags(3 bits): used in fragmentation (discussed later).
 Fragmentation offset(13 bit): used in fragmentation
(discussed later).
 Time to live(8 bits): it is used to control the maximum
number hops visited by the datagram.
 Protocol(8 bits) : defines the higher-level protocol that
uses the services of the IPV4 layer.
 Identify the bits for all these…
20.10
 Checksum (16 bits) : 1’s compliment
checksum (introduced already).
 Source address: is the IPv4 address of the
source.
 Destination address: is the IPv4 address of
the source.
20.11
Note
The total length field defines the total

length of the datagram including the
header.
20.12
Figure 20.7 Encapsulation of a small datagram in an Ethernet frame
One of the reason why “total length”

field is required.
20.13
Figure 20.8 Protocol field and encapsulated data
20.14
Table 20.4 Protocol values
20.15
Example 20.1
An IPv4 packet has arrived with the first 8 bits as shown:

01000010
The receiver discards the packet. Why?
Solution
There is an error in this packet. The 4 leftmost bits (0100)
show the version, which is correct. The next 4 bits (0010)
show an invalid header length (2 × 4 = 8). The minimum
number of bytes in the header must be 20. The packet has
been corrupted in transmission.
20.16
Example 20.2
In an IPv4 packet, the value of HLEN is 1000 in binary.

How many bytes of options are being carried by this
packet?
Solution
The HLEN value is 8, which means the total number of
bytes in the header is 8 × 4, or 32 bytes. The first 20 bytes
are the base header, the next 12 bytes are the options.
20.17
Example 20.3
In an IPv4 packet, the value of HLEN is 7, and the value

of the total length field is 0030 in hexa decimal. How
many bytes of data are being carried by this packet?
Solution
The HLEN value is 7, which means the total number of
bytes in the header is 7 × 4, or 28 bytes (with options).
The total length is 48 bytes, which means the packet is
carrying 20 bytes of data (48 − 28).
20.18
Figure 20.9 Maximum transfer unit (MTU)
20.19
Table 20.5 MTUs for some networks
20.20
Fields Related to Fragmentation
 Identification: identifies a datagram
originating from the source host. A combination
of the identification and source address must
uniquely define a datagram as it leaves the
source node.
 Uses counters and increment on sending each
datagram
 Flags: see next slide.
20.21
Figure 20.10 Flags (3 bits) used in fragmentation
• first bit: reserved (future use)

• second bit: = 1 requires the packet not to be fragmented
drops the packet if it is > MTU
• third bit: =1 more fragmented packets later

=0 the last fragmented packet
20.22
Fields Related to Fragmentation
 Fragmentation offset (13 bits): is the offset

of the data in the original datagram measured in
units of 8 bytes.
20.23
Figure 20.11 Fragmentation example
20.24
20.25
IPv4 Checksum
• IPv4 checksum use the 1’s compliment method

(chapter 10)
• Checksum only computes for IP header, not data
• Upper layer has checksum for data portion
• Header always changes in each router
• Header is chunked to 16-bit sections for computing
20.26
Figure 20.13 Example of checksum calculation in IPv4
20.27
GATE CS 2010
 One of the header fields in an IP datagram is
the Time to Live(TTL)field.Which of the
following statements best explains the need
for this field?
(A) It can be used to prioritize packets
(B) It can be used to reduce delays
(C) It can be used to optimize throughput
(D) It can be used to prevent packet looping
20.28
GATE CS 2014
 Host A (on TCP/IP v4 network A) sends an IP datagram
D to host B (also on TCP/IP v4 network B). Assume that
no error occurred during the transmission of D. When D
reaches B, which of the following IP header field(s) may
be different from that of the original datagram D?
(i) TTL (ii) Checksum (iii) Fragment Offset
 (A) (i) only
(B) (i) and (ii) only
(C) (ii) and (iii) only
(D) (i), (ii) and (iii)
20.29
GATE CS 2015
Which one of the following fields of an IP

header is NOT modified by a typical IP
router?
(A) Checksum
(B) Source address
(C) Time to Live (TTL)
(D) Length
20.30
20-3 IPv6
The network layer protocol in the TCP/IP protocol

suite is currently IPv4. Although IPv4 is well designed,
data communication has evolved since the inception of
IPv4 in the 1970s. IPv4 has some deficiencies that
make it unsuitable for the fast-growing Internet.

Advantages
Packet Format
Extension Headers
20.31
IPv6: Advantages
 Larger address space.
 Better header format.
 New options.
 Allowance for extensions.
 Support for resource allocation.
 Support for more security.
Figure 20.15 IPv6 datagram header and payload
20.33
Figure 20.16 Format of an IPv6 datagram
Priority
Protocol
20.34
Table 20.9 Comparison between IPv4 and IPv6 packet headers
20.35
20-4 TRANSITION FROM IPv4 TO IPv6
Because of the huge number of systems on the

Internet, the transition from IPv4 to IPv6 cannot
happen suddenly. It takes a considerable amount of
time before every system in the Internet can move from
IPv4 to IPv6. The transition must be smooth to prevent
any problems between IPv4 and IPv6 systems.

Dual Stack
Tunneling
Header Translation
20.36
Figure 20.18 Three transition strategies
20.37
Figure 20.19 Dual stack
Host uses DNS query result to determine which IP to use

20.38
Figure 20.20 Tunneling strategy
Popular used right now in many countries
20.39
Figure 20.21 Header translation strategy
20.40

Ipv4 DATA GRAM

Uploaded by

Copyright:

Available Formats

Ipv4 DATA GRAM

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ipv4 DATA GRAM

Uploaded by

Copyright:

Available Formats

Network Layer:

The Internet Protocol version 4 (IPv4) is the delivery

Topics discussed in this section:

IPv4 is an unreliable and connectionless

Options + padding ( 0 to 40 bytes)

 Service Type (8 bits): service type or

The total length field defines the total

One of the reason why “total length”

An IPv4 packet has arrived with the first 8 bits as shown:

In an IPv4 packet, the value of HLEN is 1000 in binary.

In an IPv4 packet, the value of HLEN is 7, and the value

• first bit: reserved (future use)

• third bit: =1 more fragmented packets later

 Fragmentation offset (13 bits): is the offset

• IPv4 checksum use the 1’s compliment method

Which one of the following fields of an IP

The network layer protocol in the TCP/IP protocol

Topics discussed in this section:

Because of the huge number of systems on the

Topics discussed in this section:

Host uses DNS query result to determine which IP to use

Popular used right now in many countries

You might also like