Scribd
Upload
304 views7 pages

ADC

1. The experiment interfaces an ADC 0809 analog-to-digital converter to an 8051 microcontroller. 2. An 8051 C code is developed to display the digital output corresponding to an analog input. The ADC 0809 chip allows monitoring of up to 8 analog inputs using a single chip. 3. The algorithm includes selecting an analog channel, latching the address, starting conversion, monitoring for completion, enabling the output to read the digital data, and displaying the digital and analog values on an LCD.

Uploaded by

sharada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
304 views7 pages

ADC

1. The experiment interfaces an ADC 0809 analog-to-digital converter to an 8051 microcontroller. 2. An 8051 C code is developed to display the digital output corresponding to an analog input. The ADC 0809 chip allows monitoring of up to 8 analog inputs using a single chip. 3. The algorithm includes selecting an analog channel, latching the address, starting conversion, monitoring for completion, enabling the output to read the digital data, and displaying the digital and analog values on an LCD.

Uploaded by

sharada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Experiment No.

PROBLEM DEFINITION: To interface Analog to


Digital Converter to 8051 microcontroller .

Department of Computer Science and Engineering, GIT 1


Objectives of the Experiment:

1. To Interface ADC 0809 to 8051 Microcontroller.


2. To develop an 8051 ‘C’ code to display the digital output of equivalent
analog input.

2
Department of Computer Science and Engineering, GIT
Theoretical Background of the Experiment
• The ADC 0809 chip allows us to monitor up to 8
different analog inputs using only a single chip.
• The 8 analog input channels are multiplexed and
selected according to A, B, C address pins.
• In ADC 0809 Vref(+) and Vref(-) set the reference
voltage. If Vref(-) =GND and Vref(+) =5V , the step size is
5V/256= 19.53mV.
• IN0 is selected by making ABC=0.
• Activate ALE to latch in the address.
• SC is for start of conversion.
• EOC is for end of conversion and OE is for output
enable.
3
Department of Computer Science and Engineering, GIT
Interfacing Block Diagram

Department of Computer Science and Engineering, GIT 4


ALGORITHM
STEP 1: INCLUDE THE HEADER FILE ‘’at89c51ed2.h’’
STEP 2: BEGIN MAIN
SELECT AN ANALOG CHANNEL BY PROVIDING BITS TO A, B AND C
ADDRESSES. (CBA=000 TO SELECT IN0)
STEP 3: ACTIVATE THE ALE (ADDRESS LATCH ENABLE) PIN BY SENDING LOW-
TO-HIGH PULSE TO LATCH THE ADDRESS.
STEP 4: ACTIVATE SC (START CONVERSION) BY AN LOW-TO-HIGH PULSE TO
INITIATE CONVERSION.
STEP 5: MONITOR EOC (END OF CONVERSION) TO SEE WHETHER THE
CONVERSION IS FINISHED. HIGH-TO-LOW OUTPUT INDICATES THAT THE
DATA IS CONVERTED AND READY TO BE PICKED UP.
STEP 5: ACTIVATE OE (OUTPUT ENABLE) TO READ DATA OUT OF THE ADC CHIP.
AN LOW-TO-HIGH PULSE TO THE OE PIN WILL BRING DIGITAL DATA OUT
OF THE CHIP.
STEP 6: DIGITAL OUTPUT AND ANALOG INPUT ARE DISPLAYED ON LCD.
(VARY THE POT TO CHANGE THE ANALOG INPUT).
STEP 7: END OF MAIN.

Department of Computer Science and


03/25/2020 5
Engineering, GIT
CONNECTION DETAILS

• PORT 0 TO CN15.

Department of Computer Science and


03/25/2020 6
Engineering, GIT
Learning Outcomes of the Experiment
At the end of the session, students should be able to :

• Write the 8051 ‘C’ program to display digital output for analog input voltage.

Department of Computer Science and Engineering, GIT 7

You might also like