Scribd
Upload
107 views5 pages

Conf Gaoke 16 Resumida

The document provides instructions for configuring the IP address, port numbering, short numbers, and trunk prefix on a Gaoke device connected to a router. The key steps are: 1. Use the "set ip" command to configure the IP address, netmask, default gateway to connect the Gaoke to the router typically on VLAN 20. 2. Use the "set multi" command to number ports sequentially from 0 to 15 without an area code and configure other multi-line parameters. 3. Use the "set shor" command to assign a 3 digit short number to each port. 4. Use the "add gw-table" command to add a trunk prefix, specify the

Uploaded by

lisani1986
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
107 views5 pages

Conf Gaoke 16 Resumida

The document provides instructions for configuring the IP address, port numbering, short numbers, and trunk prefix on a Gaoke device connected to a router. The key steps are: 1. Use the "set ip" command to configure the IP address, netmask, default gateway to connect the Gaoke to the router typically on VLAN 20. 2. Use the "set multi" command to number ports sequentially from 0 to 15 without an area code and configure other multi-line parameters. 3. Use the "set shor" command to assign a 3 digit short number to each port. 4. Use the "add gw-table" command to add a trunk prefix, specify the

Uploaded by

lisani1986
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Configuración de la IP

SE UTILIZA PARA CONFIGURAR LA IP QUE CONECTA EL GAOKE CON EL ROUTER (VLAN


TELEFONIA POR LO GENERAL VLAN20) DESPUES DE REALIZAR EL CAMBIO SAVE Y
RECETEAR EL GAOKE POR POWER ON. (para ver ip configurada sh ip)

IAD(16)>enable
Password:admin

IAD(16)$
IAD(16)$set ip
Device net interface IP address [138.0.60.1]:172.16.16.2 (IP del equipo)
Device net interface netmask [255.255.0.0]:255.255.255.0 (Mascara)
Accounting net interface IP address [192.168.1.1]:Enter
Accounting net interface netmask [255.255.255.0]:Enter
Use default gateway ?'yes'or'no'[no]:yes
Please input default gateway IP [138.0.60.2]:172.16.16.1 (Puerta Enlace)
IP configuration will take effect by resetting !

Really want to modify ?'yes'or'no'[yes]:yes


Numeración de los Puertos

Asignar numeración a los puertos de forma


correlativa numero entero sin codigo de area.

(comando para ver numeracion sh local port )

IAD(16)$set multi
Starting port[0]:0
Ending port[0]:15
Registered or not[yes|no][no]:no
User name(Enter 0 to disable):Enter
Password(Enter 0 to disable)::Enter
Display the number of the incoming call[yes|no][yes]:yes
Config port number increasingly[yes]:yes
Starting port number[5971110]: número de partida
Número Corto

Asignar número corto (Anexo)


Comando SET (puede ser a 3 digitos o a digitos
depende OTT.
Comando para ver anexos (sh shor)
IAD(16)$set shor
whether to config short number? 'yes' or 'no'[no]: yes
Batch procssing port configuration short number? 'yes' or 'no'[yes]: yes
Starting port [0]: 0 (desde)
Number of port to config [16]: 16 (hasta)
port short number[]: 1110
whether to register? 'yes' or 'no'[No]: no
Prefijo de Toma
Asignar prefijo de toma de línea y Trunk IP
la ip trunk ip es el peer.
Comando para ver peer (sh gw)

IAD(16)$add gw-table
Please input phone number(prefix):9 (toma de línea)
Is prefix'yes'or'no'[yes]:yes
Specify number length'yes'or'no'[yes]:no
Please input phone routing type(0-SIP;1-FXO;2-FXS;3-TEL)[0]:0
Please input routing IP address[0.0.0.0]:172.16.20.3 (IP de Trunk IP)
Peer gateway port(0-65535)[5060]:5060
Interception length of master phone routing [0]:1 (Borrar el 9 )
Master phone routing need extra prefix'yes'or'no'[no]:no
send calling number{0:long number 1:short number}[0]:0
Para borrar peer.
• Delete gw
• Seleccionar el peer a borrar
Y confirmar el peer con enter.
Y luego recetear por POWER ON.

You might also like