Scribd
Upload
36 views1 page

PLC Presentation

The document describes a batch mixing system using a PLC that has the following functions: 1) Material A and material B are collected in a tank to be mixed for a particular time. 2) After mixing, the product is drained out of the tank through an outlet valve. 3) A ladder program is created for the PLC to control the automatic mixing process in the tank.

Uploaded by

Achu Archu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
36 views1 page

PLC Presentation

The document describes a batch mixing system using a PLC that has the following functions: 1) Material A and material B are collected in a tank to be mixed for a particular time. 2) After mixing, the product is drained out of the tank through an outlet valve. 3) A ladder program is created for the PLC to control the automatic mixing process in the tank.

Uploaded by

Achu Archu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 1

BATCH MIXING SYSTEM USING PLC

Automatic Mixing Controlling in a Tank


Material A and material B are collected in a tank. These materials will be mixed for particular time and then mixed
product drained out through outlet valve. Implement ladder program for this application in PLC.

Create a ladder diagram for controlling a batch mixing process. Implement


a PLC program for mixing tank or Mixing Process using PLC Ladder
Logic.
PLC Program for Mixing Tank
Fig : Mixing tank
A
A tank is used
relay to mix that
schematic two liquids.
will
perform the logic of this circuit
is shown in Below Figure. The
logic of this circuit is as
follows: Diagram

ARCHITHA.A

18BEC005
Fig : Relay Schematic IIBSC ECS

You might also like