Canon Printer Error P07

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 6
At a glance
Powered by AI
The document discusses troubleshooting Canon Printer Error P07 which occurs when the ink disposal is full. It mentions two methods and their steps to resolve the error.

Method 1 involves resetting the printer by pressing the power button for 10 seconds while unplugged. Method 2 involves alternative steps if Method 1 does not work.

Method 1 and Method 2 are described. Method 1 involves resetting the printer. Method 2 involves entering service mode, downloading a resetter software, and clearing the ink counter.

CALL US:

USA Toll-Free : +1-800-931-3158


UK Toll-Free : +44-808-164-5280
Canon Printer model such as MP258, MP287, MP280, e500 are facing the
issues error P07. To fix Canon Printer Error P07 which has occurred in 3in 1
printer that is which can print, copy and scan. Printer have their lifespan
which reaches maximum number of prints and ink absorber counter it come
across error code.

The error code can be resolved with pretty steps mentioned in blog to reset
the printer machine. The error p07 will be displayed on LCD panel and
monitor screen when ink disposal is full. This error also read as P,7, p7, with
no doubts user have definitely tried to follow online tutorials to solve the
problem. But after number of failure user can try resetter program which is
not compatible to printer.
Steps to troubleshoot Canon Printer Error P07:

Method 1: Try following the method

In case the Canon Printer device is not functioning properly or to clear the
memory user need to reset it.

•On the operator panel, press the button. Make sure user has unplug the
power cord if pressing the ON button does not shut off the Canon printer.
•User need to wait near about ten seconds and then press the button again.
•User now need to wait until the device has completed its cycling process
before submitting another job request. Make sure user now also unplug the
power cord and retry if the above steps do not clear the error.

Method 2: Alternative to first method

Step 1: Entering Service Mode

•While the printer is OFF, press and hold the Start or Stop button try either
this way Resume or Cancel in some other models
•While holding the Start or Stop button, press and hold the POWER button.
•When the POWER LED which is green light is lit, release the Start/Stop
button an still holding the POWER button
•Press the Start or Stop button TWICE or still holding the POWER button
•Release the POWER button.
•Wait for the LCD to display “0″ (zero).

Step 2: Using the Resetter or Software

•Download the Ressetter online


•Run “service_tool 1050.exe”.
•Detected USB-port numbers on USB port column is detected.
•Click “Main button” on Clear ink counter section. Make sure there are
papers in the paper feed because the printer will print after the process is
complete.
•Click “platen button” on the “Clear ink counter” section. The printer will
print again.
•Turn off the printer and then turn the printer on. You printer is ready for
use.
Get In Touch With US

USA Toll-Free : +1-800-931-3158


UK Toll-Free : +44-808-164-5280

Mail us : [email protected]

You might also like