Automatic Window Open and Close System Mini Project
This document describes an automatic window opening and closing system project presented by students. The system uses a rain sensor and servo motor to automatically close windows when rainfall is detected. The objective is to close windows without external forces when it rains. The system was built using an Arduino Mega microcontroller, rain sensor, servo motor, and connecting wires. It detects rainfall using the sensor and sends a signal to close the windows via the servo motor. The main advantages are low cost, effectiveness, and ease of use without skills. It has applications in homes, colleges, malls and more to protect indoor areas from rain. Testing showed the system successfully closed windows automatically during rainfall.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0%(1)0% found this document useful (1 vote)
2K views
Automatic Window Open and Close System Mini Project
This document describes an automatic window opening and closing system project presented by students. The system uses a rain sensor and servo motor to automatically close windows when rainfall is detected. The objective is to close windows without external forces when it rains. The system was built using an Arduino Mega microcontroller, rain sensor, servo motor, and connecting wires. It detects rainfall using the sensor and sends a signal to close the windows via the servo motor. The main advantages are low cost, effectiveness, and ease of use without skills. It has applications in homes, colleges, malls and more to protect indoor areas from rain. Testing showed the system successfully closed windows automatically during rainfall.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15
Automatic window opening
and closing system
Presented by: Guide by:Ms. Ch. Supriya(17K45A0410 ) Sudharani.Asst professor department of ECE Sravya(16K41A0431 ) Urmila(17K45A0411) Varshith(16K41A0416) Content of the project: • OBJECTIVE • TOOLS • ANALYSIS/DESCRIPTION • EXCUTION OF THE PROJECT • RESULT ANALYSIS OBJECTIVE OF PROJECT: • When sensor detects rainfall windows will close automatically. • Windows will close automatically without external forces. • Without wasting our time it will close automatically within a span of time. Tools used: Hardware: • Arduion Mega 2560 • Bread board • Rain sensor • Servo motor • Connecting wires Software: • Arduino TECHNIQUES
• In this project we used automatic window opening and closing system
techniques when sensor detects rainfall, it can be found that the Arduino based sensors have been utilized for automatic window opening and closings and automated car window opening and closings systems. • In this project, Arduino microcontroller used to control two functional components which are the rainfall sensor and the motor to automatically close the windows. Analysis and Description : • In order to protect the household interior in rainy season this device has been developed.We developed an automatic window opening and closing system using rain sensor,this system will help the human being, when the rainfall occurs it will sense the water by the rain sensor then it will automatically close the window. It is used in the hospitals, colleges, homes etc.. • During rain season,every window in home automatically closed by using the rain sensor.The sensor detects the rain and it send the signals to the circuit board (i.e. this circuit is designed with two lines are tracked with very short distance. When raindrops falls on this circuit, the track may become short circuit. It gives the corresponding signal to related circuit in order to find the rain fall). Due to this the window gets closed with the help of rack and pinion setup. When rainfall stops the window gets opened automatical Advantages: • The main advantages of automatic window opening and closing system are their low cost • This is having high effectiveness. • It requires no special skill to operate and therefore is most suitable for rural application. • It can be made from locally available materials. Disadvantage: • Sensor may get damage due to some natural effects like high speed flow of air in the atmosphere. • Some Space is required inside the building. • Automatic window will take more time (Especially after the flow of rain it takes more time to open the window). Application • We can use in homes,colleges. • Malls,theatres,hospitals etc., Execution of project: • After constructing the block diagram in the software and giving the hardware connections, click run simulation. • The functional process of this project has 2 main conditions. When it detects rainfall windows are automatically closed, if not remain same or open the windows. • These conditions are verified by keeping the rainfall sensor in the circuit. • When the sensor is kept on the outside the window, the sensor senses analog voltage value and is given to port A pin-3 of the arduino. • This analog voltage is then compared with the threshold voltage of rainfall. Result Analysis: • The work is successful and application of such a simple method in a house window seems to be reasonable as unattended open windows can be closed when it rains to protect the indoor from rain. The circuit can further be modified to add a wind speed sensor so as to close the windows when winds of a certain limit of speed blows, thus it will prevent the indoors from unwanted impurities like dust. The circuit and the window structure and mechanism can further be modified for better efficiency and with the consumption of less energy. Another modification is that a battery can be added as a backup power source under no current conditions. The designed Automatic window model will be highly useful to Buildings which are all in cities especially multinational companies of any fields such as IT, Mechanical Core.