Scribd
Upload
324 views19 pages

Tuning of PID Controller Using Ziegler-Nichols Method For DC Motor Speed Control

This document compares tuning methods for PID speed controllers for DC motors using Ziegler-Nichols and modified Ziegler-Nichols methods. Computer simulations show that the modified Ziegler-Nichols technique results in better performance than the traditional method based on metrics like rise time, overshoot, and settling time.

Uploaded by

Mubashir Rasool
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
324 views19 pages

Tuning of PID Controller Using Ziegler-Nichols Method For DC Motor Speed Control

This document compares tuning methods for PID speed controllers for DC motors using Ziegler-Nichols and modified Ziegler-Nichols methods. Computer simulations show that the modified Ziegler-Nichols technique results in better performance than the traditional method based on metrics like rise time, overshoot, and settling time.

Uploaded by

Mubashir Rasool
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

Tuning of PID controller using

Ziegler-Nichols method for speed


control of DC motor

Mubashir Rasool
191830
Abstract:

• In this paper, a weighted tuning methods of a PID speed controller for


separately excited Direct current motor is presented, based on
Empirical Ziegler-Nichols tuning formula and modified Ziegler-Nichol
PID tuning formula.
• Both these methods are compared on the basis of output response,
minimum settling time, and minimum overshoot for speed demand
application of DC motor.
• Computer simulation shows that the performance of PID controller
using Modified Ziegler-Nichols technique is better than that of
traditional Ziegler-Nichols technique.
Introduction:
• DC motors are finding great applications in these days inspite of
power electronics development

• The speed of DC motor can be adjusted to a great extent as to provide


controllability and high performance

• The controllers of the speed are conceived for goal to control the
speed of DC motor to execute one variety of tasks
DC MOTOR:
• DC motor system is a separately excited DC motor
• This paper focuses on the study of DC motor linear speed control,
therefore, the separately excited DC motor is adopted.
• Armature voltage control method to control the DC motor velocity.
Continue..
Controllers for DC Motors:

1. PID Controller
2. Fuzzy Logic Controller
3. Genetic Algorithm technique
4. Particle Swarm Optimization technique
5. Fuzzy-Neural Networks
6. Fuzzy-Genetic Algorithm
7. Fuzzy-Ants Colony
8. Fuzzy-Swarm
PID CONTROLLER:
• A PID controller continuously calculates an error value e(t) the
difference between a desired set-point (SP) and a measured process
variable (PV) and applies a correction based on proportional, integral,
and derivative terms (denoted P, I, and D respectively).Here we
Control the armature voltage of the Dc motor to control its speed.

•
Ziegler-Nichols method
• This method is applied to plants with step responses.
• The response is characterized by two parameters, L the delay time
and T ,the time constant.
• These are found by drawing a tangent to the step response at its
point of inflection and noting its intersections with the time axis and
the steady state value. The plant model is
PID WITH Ziegler-Nichols method:
Disadvantages:
• Heuristic Method( Not guaranteed to be optimal, Perfect)

• Aggressive Overshoot

• Lack of selection of parameters

• Large Values of rise time, overshoot and settling time.


Objectives:
1. Minimize the rise time

2. Minimize the maximum overshoot

3. Minimize the settling time


Modified Ziegler-Nichols Tuning Method

• Modified Ziegler-Nichols tuning using Chien-Hrones-Reswick (CHR)


tuning algorithm emphasizes on set-point regulation.
• In addition one qualitative specification on the response speed and
overshoot can be accommodated.
• CHR method uses the time constant T of the plant explicitly.
Continue..
• Basically we design a Compensator based on Chien–Hrones–Reswick
(CHR) tuning algorithm which uses the time constant T, delay time L
and gain k.
• a = kL/T
Simulation and Analysis:
Results Motor 1:
(a) Step response with Traditional Ziegler-Nichols method.

(b) (b) Step response with Modified Ziegler-Nicolas method.


Results Motor 2:

(a) Step response with Traditional Ziegler-Nichols method.


(b) Step response with Modified Ziegler-Nicolas method
Results Motor 3:

(a) Step response with Traditional Ziegler-Nichols method.


(b) Step response with Modified Ziegler-Nicolas method
Conclusion:
• Modified Ziegler-Nichols tuned PID controller efficiently is better than
the traditional Ziegler-Nichols.
• Modified Ziegler-Nichols is the best controller which presented
satisfactory performances for the objectives (i.e Minimum rise time,
Minimum overshoot, and Minimum settling time)

You might also like