Scribd Logo
Upload

Welcome to Scribd!

  • 290 views

    PPT

    Uploaded by

    Saranya Guttula
    1) The document presents a novel double-stage buck-boost converter with soft switching operation for renewable energy applications. 2) The proposed converter uses two identical buck-boost converters working in parallel and an inductor to maintain zero voltage switching. 3) Simulation results show that the proposed converter achieves soft switching and is well-suited for applications like wind power generation.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    PPT

    Uploaded by

    Saranya Guttula
    290 views25 pages
    1) The document presents a novel double-stage buck-boost converter with soft switching operation for renewable energy applications. 2) The proposed converter uses two identical buck-boost converters working in parallel and an inductor to maintain zero voltage switching. 3) Simulation results show that the proposed converter achieves soft switching and is well-suited for applications like wind power generation.

    Original Description:

    power point presentation

    Original Title

    ppt

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document presents a novel double-stage buck-boost converter with soft switching operation for renewable energy applications. 2) The proposed converter uses two identical buck-boost converters working in parallel and an inductor to maintain zero voltage switching. 3) Simulation results show that the proposed converter achieves soft switching and is well-suited for applications like wind power generation.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    290 views25 pages

    PPT

    Uploaded by

    Saranya Guttula
    1) The document presents a novel double-stage buck-boost converter with soft switching operation for renewable energy applications. 2) The proposed converter uses two identical buck-boost converters working in parallel and an inductor to maintain zero voltage switching. 3) Simulation results show that the proposed converter achieves soft switching and is well-suited for applications like wind power generation.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 25

    A DOUBLE-DECK BUCK-BOOST CONVERTER WITH SOFT SWITCHING

    OPERATION FOR RENEWABLE ENERGY APPLICATIONS

    PROJECT ASSOCIATES ESTIMATED GUIDELINES


    T.Jayasehkar reddy(16AJ5A0220) OF
    K.Divya(15AJ1A0215) Mrs.B.Jyostna M.Tech
    D.Sai kumar(16AJ5A0205) Assistant profecer
    M.Yagnapriya Bhavani(16AJ5A0214)
    CONTENTS
    • ABSTRACT
    • INTRODUCTION
    • DC-DC CONVERTER
    • BUCK CONVERTER
    • BOOST CONVERTR
    • BI-DIRECTIONAL DC-DC CONVERTER
    • PROPOSED CIRCUIT
    • RESULT
    • ADVANTAGES&APPLICATIONS
    • CONCLUSION
    • FUTURE SCOPE
    • REFERENCE
    ABSTRACT
    • This project presents a novel two stage buck boost converter with a soft switching operation
    for RE applications.
    • The proposed converter is constructed of two identical buck boost converters working in
    parallel.
    • This inductor plays an important role in the soft switching operation of the converter by
    maintaining the voltage applied to switches at ZERO at switching intervals.The utilized
    method is called the ZERO voltage switching method.

    • The detailed analysis of the circuit operation is provided in EIGHT modes and also the
    performance of this converter is analysed by using it in wind power generation.
    INTRODUCTION
    • The buck boost converter is called DC-DC converter. There are two different topologies in
    buck boost converter.
    • One is inverting topology and another one is non inverting topology both of them can
    produce a range of output voltages.
    • The output voltage is opposite polarity then the input.This is called a switched mode
    power supply(SMPS) with same circuit topologies to the boost converter and the buck
    converter.
    • Based on the duty cycle of the switching transistor,the output voltage is adjustable.
    DC-DC CONVERTER
    • Dc-Dc converters are electronic devices used whenever we want to change DC electrical
    power efficiently from one voltage level to another voltage.

    • Generally speaking the use of a switch or switches for the purpose of power conversion
    can be regarded as a SMPS.

    • From now onwards whenever we mention DC-DC converters we shall address them with
    respect to SMPS.

    • In all of this applications,we want to change the DC energy from one voltage level to
    another,while wasting as little as possible in the process.
    BUCK-CONVERTER

    fig:Buck converter

    • The buck converter is used to step an input voltage down from higher potential to a lower potential.The circuit
    usually consists of an inductor to store energy and a switch to control the power flow
    • ON STATE:When the switch is on the diode is open and the inductor and the load side is connected to the
    inductor stores energy.
    • OFF STATE:The switch opens to isolate the source from the rest of the circuit the diode becomes positive biased
    as the inductor changes polarity and the inductor discharges to provide energy to the load.
    BOOST CONVERTER

    • A boost converter(step-up converter)is a DC-DC power converter with an output


    voltage greater than its input voltage.
    • It is a class of switched-mode power supply(SMPS) containing at least two
    semiconductor switches.
    • Filters made of capacitors are normally added to the output of the converter to
    reduce output voltage ripple.
    BI-DIRECTIONAL DC-DC CONVERTER
    • Most of the existing bidirectional DC-DC converter fall into the generic circuit structure
    illustrated in below fig ,which is characterized by a current fed or voltage fed on one
    side.

    • Based on the placement of the auxiliary energy storage,the bidirectional DC-DC coverter
    can be categorized into buck-boost type.

    • The buck type is to have energy storage placed on the high voltage side,and the boost
    type is to have it placed on the low voltage side.
    BI-DIRECTIONAL DC-DC CONVERTER BASIC
    DIAGRAM
    POWER FLOW:
    PROPOSED CIRCUIT
    WORKING:
    • The configuration of the proposed converter in fib.3.1.it is composed of two identical buck-
    boost converter working in parallel
    • The source and the output capacitor Co are shared between two converter.
    • This element plays as important role in main plot of the soft switching manner of the
    converter.
    EQUIVALENT CIRCUIT DIAGRAMS OF DIFFERENT
    OPERATION MODES:
    THEORETICAL WAVEFORMS:
    SIMULATION OF PROPOSED CONVERTER:
    RESULTS:
    SIMULATION OF DOUBLE DECK BUCK BOOST
    CONVERTER IN WIND POWER GENERATION:
    ADVANTAGES&APPLICATIONS
    • It gives higher output voltages
    • Low operating duct cycle.
    • Low voltage on MOSFETs.
    APPLICATIONS:
    • It has consumer electronics.
    • It is used in the battery power system.
    • Adaptive control applications.
    • Power amplifier applications.
    CONCLUSION&FUTURE SCOPE
    • In this project,a novel double-stage buck-boost converter with ZVS capability is
    proposed.
    • The theoretical analysis and design equations are describe to achieve the soft
    switching operation of the proposed converter.
    • To investigate the effect of the ZVS technique on the proposed converter efficiency
    rather than a normal single-stage buck-boost converter,the output power has been
    changed within the interval of 100-200W.
    FUTURE SCOPE:
    • This concept can be accomplished in the similar dc/dc converters such as Cuk converter
    etc..
    REFERENCE
    • Erfan maali and Behrooz vahidi, “Double-deck Buck-Boost converter with soft
    switching operation,” IEEE Transactions on power electronics,vol.31, no. 6, June 2016.
    • J. Hong, H. Lee, and k. Nam, ”charging method for the secondary battery in dual-
    inverter drive system for electric vehicle,” IEEE Trans. Power electron., vol. 30, no 2,
    pp. 909-921, Feb. 2015.

    You might also like