Groove G30

Overview
Disclaimer

Coriant training materials may contain simplifications and are not to be considered as
technical documentation or product specifications. The materials are subject to change.
Coriant Training Services assumes no liability for any errors or discrepancies contained in
the training materials.

The following trademarks and service marks are owned by Coriant Operations, Inc., or its
affiliates in the United States and/or other countries: Coriant®, Coriant CloudWave™,
Coriant Dynamic Optical Cloud™, Coriant Groove™, Coriant Transcend™, mTera®,
Nano™, and Pico™. Any other company or product names may be trademarks of their
respective companies.

Copyright © 2017. All rights reserved.

This training material is protected by U.S. and international copyright laws, conventions
and treaties. Your right to use this training material is subject to limitations and restrictions
imposed by applicable licenses and copyright laws. Unauthorized reproduction,
modification, distribution, display or other use of this training material may result in criminal
and civil penalties.

CONFIDENTIAL & PROPRIETARY

Objectives

Upon completion of this eLearning, you will be able to:

• Recognize the components in the Groove G30 platform
• Discuss the Groove G30 platform management solutions
• Recognize the network applications of the Groove G30 platform
Groove G30 Overview

 Purpose-built for the surging demand for Data Center

Interconnect (DCI) cloud, high speed metro, and long haul
applications, the Groove G30 can be equipped as a muxponder
terminal solution and as an Open Line System (OLS) optical layer
solution and features the industry’s highest density and lowest
power consumption.
Groove G30 Network Disaggregation Platform

 As an open Network Disaggregation Platform (NDP) offering

configurations for secure DCI transmission and optical line solutions
enabled through open APIs, the Groove G30 ensures rapid introduction
and integration within any data center or telecom operating environment.
Groove G30 Open Line System

 Groove G30 OLS features the most dense Optical Layer for DCI
and Metro deployments with 19.2Tbps capacity in 1RU including
Mux/Demux, Preamp, Booster and OSC.
Groove G30 Open Line System (2)

 Supports OMD96 and OCC2 double width sled cards

 OMD96: 96-channel Optical  OCC2: Optical Carrier Card

Multiplexing/De-multiplexing card – 3xOFP2 cages + 2xSFP cages
 LC connector for DWDM Port  Configurable Optical Layer
 MTP (4x Tx + 4x Rx Grouping) on – Pre-Amplifiers with Optical
A/D ports Supervisory Channel
– MTP/LC breakout cable to – Pre-Amplifiers and Booster
coherent CFP2-ACO Amplifiers
Groove G30 Muxponder

 Compact high-speed solution for efficient data center

connectivity

 3.2 Tbps capacity throughput (Client + Line) in a compact

1RU form factor chassis
– Line Interfaces: 100G, 150G and 200G
– Client Interfaces: FC8G, FC16G, 10G, OC192, 40G, 100G and OTU4
– Software Programmable Optics
Groove G30 Muxponder (2)

 Supports single (CHM1) and double (CHM2) width sled

– 4 Pluggable Slots
– Network/Line Interface: CFP2-ACO pluggable
– Client Interfaces: QSFP+/QSFP28 pluggable
– Integrated wire-speed AES-256 OTN payload encryption
Groove G30 Technology Convergence

 Technology convergence has made a purpose built

Network Disaggregation Platform.
CLI, NMS, Simplified DC
SDN APIs Operational
Concepts

Programmable
Optics Multivendor
Disaggregation Interoperability
Model

Coherent
Technology Photonic
Integration

Low Power
Pluggables
Very low
power DSP
Groove G30 Management Platforms

 Seamless integration with end user control framework and OSS

 Open platform based on YANG API and NETCONF/RESCONF north bound
interfaces for fast integration with any OS
 Groove G30 Applications
Point-to-Point Data Center Interconnection

Primary Data Center Secondary Data Center

Data Center
100GbE
Fibers 100GbE
Data Center
Switch Switch
2 2 2 2 GrooveTM 2 2 2 2 GrooveTM

Debug

Debug
Power
1 1 1 1 Power
1 1 1 1
Fan
Fan
Fault
Fault

RESET Eth Mgt USB RESET Eth Mgt USB

3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6

2
1
3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6

2
1
G30 MUX G30 MUX

SAN
SAN
Label Label
Switch Router Switch Router

FC FC

Server Fibre Channel Storage Array Storage Array Fibre Channel Server
Farms Disk Subsystem Disk Subsystem Farms
 Groove G30 Applications
Groove interconnect

Data Center

hiT 7300
Data Center
100GbE Switch
Long haul 2 2 2 2 GrooveTM

Debug
Power
1 1 1 1
Fan

Fault

RESET Eth Mgt USB

3 4 5 6 3 4 5 6 3 4 5 6 3 4 5 6

2
1
G30 MUX
hiT 7300 hiT 7300

SAN
Label
Switch Router

mTera Metro/Regional
FC

mTera

Storage Array Fibre Channel Server

Disk Subsystem Farms
mTera
 Groove G30 Applications
Several Lambdas Into Single Fiber

OMD EDFA EDFA OMD

G30 MUX G30 MUX

1.6T Line Side Capacity 1.6T Line Side Capacity
1.6T Client Side Capacity Optical Mux/Demux Optical Carrier Card Optical Mux/Demux Optical Carrier Card 1.6T Client Side Capacity
OMD96 OCC2 OMD96 OCC2

100GbE
100GbE
Data
Data G30 OLS (Open Line System) Center
Center Switch
Switch

SAN
SAN Label
Label Switch
Switch Router
Router

FC FC

Fibre Storage Storage Fibre Channel Server

Server
Channel Disk Array Array Disk Farms
Farms
Subsystem Subsystem
 Groove G30 Applications
Low Speed Clients on Double Sleds

Primary Data Center Secondary Data Center

Data Center Fibers Data Center

Switch 40GbE 40GbE Switch
2 4 2 4 GrooveTM
2 4 2 4 GrooveTM

Debug
Power

Debug
1 3 1 3
Power
1 3 1 3 Fan
Fan
Fault
Fault
RESET Eth Mgt USB
RESET

2
1
Eth Mgt USB

2
1
G30 MUX G30 MUX

SAN SAN

Label Label
Switch Router Switch Router

Server Server
Farms Fibre Channel Farms
Storage Array Fibre Channel Storage Array
Disk Subsystem Disk Subsystem
Module Summary

In this eLearning, the following content was covered:

 Recognizing the components in the Groove G30 platform
 Discussing the Groove G30 platform management solutions
 Recognizing the network applications of the Groove G30 platform
End of eLearning