Scribd
Upload
34 views6 pages

Control Review 1

The document describes a gesture controlled robot that can be operated through hand gestures detected by an accelerometer. The accelerometer measures hand motion and transmits signals via an Arduino transmitter to an Arduino receiver connected to a robot's chassis and motors. The robot then moves according to the hand gestures, allowing it to be controlled remotely through natural hand movements. Potential applications include military robot operation, medical surgeries, construction work, and industrial machinery control.

Uploaded by

DIVYANSH AGRAWAL 17BEC0766
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
34 views6 pages

Control Review 1

The document describes a gesture controlled robot that can be operated through hand gestures detected by an accelerometer. The accelerometer measures hand motion and transmits signals via an Arduino transmitter to an Arduino receiver connected to a robot's chassis and motors. The robot then moves according to the hand gestures, allowing it to be controlled remotely through natural hand movements. Potential applications include military robot operation, medical surgeries, construction work, and industrial machinery control.

Uploaded by

DIVYANSH AGRAWAL 17BEC0766
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 6

GESTURE

CONTROLLED
BOT
LITERATURE SURVEY
SUGGESTION GIVEN

Gesture Controlled Bot is a robot which can be controlled by your normal hand gesture. The
accelerometer controls the movement of the robot. Accelerometers are used to measure the angular
displacement of human hand motion. It consists of mainly two parts, one is transmitter part and another
is receiver part.The transmitter will transmit the signal according to the position of accelerometer
attached on your hand and the receiver will receive the signal and make the robot move in respective
direction. Here, the program is designed by using Arduino.
BLOCK DIAGRAM ARCHITECTURE
DIAGRAM
WORKING
• The code is uploaded on the Arduino. In this case we have used 2 Arduinos, one for
transmitter and one for receiver.
• The Arduino sends the signals to RF transmitter. These signals are then transmitted to the RF
receiver using radio frequencies (433Mhz).
• From this receiver, the signals are transmitted to the Arduino connected to the motor and
chassis through L293D motor driver.
• So, as the accelerator moves in different directions, the robot also moves according to the
values set in the accelerometer.
OUTCOME
• The outcome of this will be a robot which can be controlled by your hand movements. The
image shown below tells the various possible movements of the bot.
APPLICATIONS

The applications of the accelerometer based gesture controlled robot include


• These robots are used in military applications to operate robots
• These robots are used in medical applications for the purpose of surgery
• These robotics are used in the construction field
• These robotics are used in industries to control trolley and lift.

You might also like