100% found this document useful (2 votes)
89 views13 pages

L09 - Introduction To Magnetism

This document provides an introduction to magnetism and magnetic circuits. It defines key terms like magnetic field, flux, reluctance and permeability. It describes how a current-carrying conductor generates a magnetic field and how electromagnets work. It also summarizes losses in magnetic circuits from hysteresis and eddy currents. Magnetic and electric circuits are analogous, with magnetic flux replacing current and reluctance replacing resistance. However, magnetic flux does not physically flow.

Uploaded by

dhruv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
100% found this document useful (2 votes)
89 views13 pages

L09 - Introduction To Magnetism

This document provides an introduction to magnetism and magnetic circuits. It defines key terms like magnetic field, flux, reluctance and permeability. It describes how a current-carrying conductor generates a magnetic field and how electromagnets work. It also summarizes losses in magnetic circuits from hysteresis and eddy currents. Magnetic and electric circuits are analogous, with magnetic flux replacing current and reluctance replacing resistance. However, magnetic flux does not physically flow.

Uploaded by

dhruv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 13

Basic Electrical Technology

Introduction to Magnetism

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 1
Magnetism
A physical phenomena by which materials exert attractive or repulsive force on
other materials.

Magnetic Materials
o Properties:
• Points in the direction of geometric north and south pole when suspended
freely and attracts iron fillings.

o Classification:
• Natural Magnets: Lodestone
• Temporary magnets (exhibits these properties when subjected to external
force)
• Non-magnetic materials.

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 2
Definitions
Magnetic Line of Force
o Closed path radiating from north pole, passes through the surrounding, terminates at
south pole and is from south to north pole within the body of the magnet.

 Magnetic Field
o The space around which magnetic lines of force act.
o Strong near the magnet and weakens at points away from the magnet.

 Magnetic Flux (𝝓)


o Analogous to Electric Current
o Number of magnetic lines of force created in a magnetic circuit.
o Unit : Weber (Wb)

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 3
Definitions
Magnetic Flux Density (B)
o Analogous to Current Density
o No. of magnetic lines of force created in a magnetic circuit per unit area normal to the
direction of flux lines
o 𝑩 = 𝜱/ 𝑨
o Unit : Wb/m2 (Tesla)

 Magneto Motive Force (F)


o Analogous to EMF
o Force which drives the magnetic lines of force through a magnetic circuit
o𝑭 = 𝜱 × 𝑺 = 𝑵 × 𝑰,
Where, 𝜱 = Magnetic flux, 𝑺 = Reluctance of the magnetic path,
𝑵 = No. of turns of the coil, 𝑰 = Current flowing through the coil
o Unit: AT (Ampere-Turns)

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 4
Definitions
Magnetic Field Strength (H)
o Analogous to Electric Field Strength
o The magneto motive force per meter length of the magnetic circuit
o 𝑯 = (𝑵 × 𝑰)/𝒍
o Unit: AT/m
Permeability (μ)
o Analogous to Conductivity
o A property of a magnetic material which indicates the ability of magnetic circuit to carry
magnetic flux.
o𝝁 = 𝑩∕𝑯
o μ0 = 4π × 10−7⟹ Permeability of free space or air or non magnetic material
o Unit: H/m
Relative Permeability (μr)
o Permeability of the material with reference to air / vacuum
o 𝝁𝒓 = 𝝁Τ𝝁𝟎

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 5
Definitions
Reluctance (S)
o Analogous to Resistance
o Opposition of a magnetic circuit to the setting up of magnetic flux in it.
o Unit: AT/Wb

Derivation of an expression for reluctance


𝑯 = (𝑵 × 𝑰)/𝒍
𝝁=𝑩∕𝑯
𝑩 = 𝜱/ 𝑨
𝜱
𝑭 = 𝑵 × 𝑰 = 𝑯 × 𝒍 = 𝑩Τ𝝁 × 𝒍 = (𝜱/ 𝑨 )Τ𝝁 × 𝒍 = ×𝒍
𝝁𝑨
𝜱
𝑭= ×𝒍=𝜱×𝑺
𝝁𝟎 𝝁𝒓 𝑨
𝒍
𝑺=
𝝁𝟎 𝝁𝒓 𝑨

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 6
Illustration
A ring made of ferromagnetic material has 500 mm2 as cross-sectional area and 400 mm as
mean circumference. A coil of 600 turns is wound uniformly around it. Calculate:
a) The reluctance of the ring,
b) The current required to produce a flux density of 1.6 T in the ring.
Take μr of the ferromagnetic material as 800 for flux density of 1.6 T

Ans:
a) 795774.72 AT/Wb
b) 1.06 A

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 7
Magnetic Field (in a Current-Carrying Conductor)
An electric current flowing in a conductor creates a magnetic field around it.

Direction of magnetic field


o By Maxwell’s Right Hand Grip Rule:
o Assume that the current carrying conductor is held in right hand so that the fingers wrap
around the conductor and the thumb is stretched along the direction of current. Wrapped
fingers will show the direction of circular magnetic field lines.

x .
Current outwards
Current inwards

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 8
Magnetic Field (in a Solenoid)
Direction of magnetic field
o By Right Hand Grip Rule:
o If the coil is gripped with the right hand, with the fingers pointing in the direction of the
current, then the thumb, outstretched parallel to the axis of the solenoid, points in the
direction of the magnetic field inside the solenoid

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 9
Electromagnets
Principle: An electric current flowing in a conductor creates a magnetic
N field
around it

Strength of the field is proportional to the amount of current in the coil.

The field disappears when the current is turned off.

A simple electromagnet consists of a coil of insulated wire wrapped around an iron


core.

Widely used as components of motors, generators, relays etc. I

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 10
Losses in Magnetic Circuit
Hysteresis Loss
o Lagging of magnetization or flux density behind the magnetizing force is called Magnetic
Hysteresis

o The energy dissipated as heat in the process of magnetization and demagnetization which
is proportional to the area of hysteresis loop is the Hysteresis Loss

Hysteresis
loop

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 11
Losses in Magnetic Circuit
Eddy Current Loss
The varying flux in the magnetic core induces emf and hence eddy current within the
material.

Flow in closed loops in planes perpendicular to the magnetic field

Results in loss of power and heating of the material.

Cores of electric machines are laminated to reduce eddy current loss

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 12
Comparison of Electric and Magnetic Circuits

Analogy:
Electric Circuits Magnetic Circuits
Current Flux
Current Density Flux Density
EMF MMF
Conductivity Permeability
Resistance Reluctance

Differences:
Electric Circuits Magnetic Circuits
Current actually flows Flux does not flow
Current can not flow in air / Flux can be created in air /
vacuum vacuum

Course Code: [ELE 1051] DEPT. OF ELECTRICAL & ELECTRONICS ENGG., MIT - MANIPAL 13

You might also like