RELIABILITYrev2 Jan17 - Version 2
RELIABILITYrev2 Jan17 - Version 2
RELIABILITYrev2 Jan17 - Version 2
What is Reliability?
• Reliability is a measure of the ability of a product or
part to perform its intended function under a
prescribed set of conditions. In effect, reliability is a
probability.
2
Reliability
• Reliability of a product or part is used in two ways.
1. Reliability when activated (one point in time)
eg. an air bag in the car, missile etc
2. Reliability for a given length of time (length of
service)
eg. a car, a computer etc
3
Probability of Functioning When
Activated
• The probability that a part or product will operate
as planned is an important concept in product
design.
• Determining that probability when the product
consists of a number of independent components
requires the use of rules of probability for
independent events.
• Independent events have no relation to the
occurrence or non-occurrence of each other.
4
Probability of Functioning When
Activated (cont..)
Rule 1. If two or more events are independent and “success” is defined
as the occurrence of all of the events, then the probability of success
Ps is equal to the probabilities of the events occurring, i.e., Ps = P1 × P2
× . . (series network)
Example. Suppose a room has two lamps, but to have adequate light
both lamps must work (success) when turned on. The product is the
lighting system that has two component lamps. One lamp has a
probability of working of .90, and the other has a probability of
working of .80.
The probability that both will work is .90 × .80 = .72.
This lighting system can be represented by the following diagram
where the two components are connected in series:
5
Probability of Functioning When
Activated (cont..)
Rule 2. If two or more events are independent and “success” is defined
as occurrence of at least one of the events, then the probability of
success Ps is equal to 1 – probability that none of the events will occur,
i.e., 1 - (1 - P1)(1 - P2)(1 - P3). . . ..
Example. There are two lamps in a room. When turned on, one has
probability of working of .90 and the other has probability of working of
.80. Only a single lamp is needed to light the room for success. Then,
probability of success Ps = 1 – (1 – .90)(1 – .80) = .98. Conceptually, we
can think of this system as a lamp with a backup. If the first lamp fails to
light when turned on, the backup lamp is turned on. The probability of
success Ps is probability that the first lamp operates plus probability that
the first lamp fails and the backup lamp operates, i.e., .90 + (1 − .90) × .80
= .98.
6
Reliability Network
• Series Network:
– The system level failure rate is the sum total of all the
individual component failure rates, as follows:
• 𝜆𝑠 = σ 𝜆𝑖
• s = system
• i = the individual component failure rate
– The overall system reliability is:
• 𝑅𝑆 = 𝑅1 𝑅2 … … (𝑅𝑛 )
7
Reliability Network
• Parallel Network
R(t) = 1 – (1 – R1)(1 – R2)(1 – Rn)
• Series & Parallel Network
R(t) = [R1][1 – (1 – R2)(1 – R3)(1 – R4)][R5]
COMPONENT 2
COMPONENT 4
8
Probability of Functioning for a Given
Length of Time
• Considers a use factor; the time dimension.
• Probabilities are determined relative to a specified length of
time.
• Product warranties, e.g., one year free repair.
• Failure rate per hour () is defined as the number of failures
divided by total operating hours.
Example : 200 units of a particular component were subjected to
accelerated life testing equivalent to 2,500 hours of normal use.
One unit failed after 1,000 hours and another after 2,000 hours.
All other units were still working at the conclusion of the test.
The failure rate per hour = 2/[198 (2,500) + 1,000 + 2,000] =
0.000004016 per hour.
9
Probability of Functioning for a Given
Length of Time (cont..)
• Typical profile of failure rate over time
– bathtub curve.
- a number of parts fail shortly after
they are put into service because they
are defective to begin with.
- the rate of failure decreases rapidly as
the defective items are weeded out.
- the 2nd phase, random failures occur
and covers a relatively long period of
time (several years).
- in the 3rd phase, items worn out and
the failure rate increases.
10
Probability of Functioning for a Given
Length of Time (cont..)
• The inverse of failure rate per hour is mean time to failure
(MTTF), the average length of time (in hours) before failure.
MTTF = 1/Failure rate per hour
MTTF = 1/
• For repairable items, a similar term, mean time between
failures (MTBF), is usually used. MTBF is the average time
from the up time after the repair following a failure to the
next failure.
MTBF = 1/
11
Probability of Functioning for a Given
Length of Time (cont..)
System Reliability :
1. Reliablility for non repairable items/parts :
Reliability = P(no failure before T) = e-t/MTTF
Rs = e-t/MTTF
13
Example 2
• The system MTBF is 57 hours;
• Calculate the Reliability for a 6 hours mission?
• Solution:
R = e-t/MTBF
R = e-6 / 57
R = e-0.105
R = 0.900
14
Example 3
By means of extensive testing and MTTF = 4 years
data collection, a manufacturer a. t = 4 years:
has determined that a particular t/MTTF = 4 years/4 years = 1.00
model of its vacuum cleaners has Rs = e-t/MTTF
an expected life with a mean of = e-1.00
four years. Find the probability = .3679
that one of these vacuum cleaners
b. The probability of failure before T = 4
will have a life that ends: years is
a. After the initial four years of 1 − e-1.00or 1 − .3679 = .6321
service. c. t = 6 years:
b. Before four years of service are t/MTTF = 6 years/4 years = 1.50
completed. Rs = e-t/MTTF
c. Not before six years of service. = e-1.50
= .2231
15
Availability
• The fraction of time a piece of equipment or a
repairable product is expected to be available for
operation.
• Availability is a function of both the mean time
between failures and the mean time to repair (the
average length of time to repair a failed item).
16
Example 4
• A copier is expected to operate for 200 hours after
repair, and the mean repair time is expected to be
two hours. Determine the availability of the copier.
• MTBF = 200 hours, and MTTR = 2 hours
• Availability = MTBF/(MTBF + MTTR)
= 200/(200 + 2)
= .99
17
Q&A
18