Scribd
Upload
37 views10 pages

Voltage and Resistance Measurements: Lab 2 Basic Electrical Engineering Engr. Pedrito Dayahan

1. This document outlines a lab experiment on creating a series circuit to light bulbs. 2. The objectives are to create a series circuit that follows the rule of effective current flow and lights the bulbs. 3. The procedure involves gathering materials, stripping wire, installing circuit breakers and other components, and connecting the wires in the correct order to test the circuit board design.

Uploaded by

Tyrone Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
37 views10 pages

Voltage and Resistance Measurements: Lab 2 Basic Electrical Engineering Engr. Pedrito Dayahan

1. This document outlines a lab experiment on creating a series circuit to light bulbs. 2. The objectives are to create a series circuit that follows the rule of effective current flow and lights the bulbs. 3. The procedure involves gathering materials, stripping wire, installing circuit breakers and other components, and connecting the wires in the correct order to test the circuit board design.

Uploaded by

Tyrone Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

VOLTAGE AND RESISTANCE

MEASUREMENTS
LAB 2
Basic Electrical Engineering
Engr. Pedrito Dayahan
Members
• Altez, John Mark T.
• Bautista, Kent Tyrone D.
• Salva, Ramon
• Santos, Irish
• Zarsadias, Timothy

BSME - 2B
List of materials:
1. Piece of Wood (½)
2. Lamp Receptacle (Surface Type 4 pcs)
3. Incandescent Lamp (24 volts 4pcs)
4. Single Switch Flush Type (220 volts 4pcs)
5. Wire TW 2.0 mm²
6. Circuit Breakers 15A (1 Set)
7. Metal Screw
8. Plastic Molding (½ " ∅)
9. Male Plug
Tools and Equipment
1. Screwdriver
2. Tester
3. Hacksaw
Introduction
Electricity is a form of energy that is carried
through wires and is used to operate machines,
lights, etc.
It involves different types depending on its
structure or what we called circuits which are
defined as the complete path that an electric current
travels along. It consists of a series and parallel or
combination of both circuits.
Series circuit involves a pattern of electric flow
which features a single line of current flow which
makes it simple and easy to be distinguish.
Objective
1. Create a series circuit pattern which follows
the rule of an effective current flow.
2. To make the bulb glow in accordance to the
series circuit.
3. To make the students understand how
electrical circuits work.
4. Express the idea of design of the students in
making a series circuit that works
Procedure
1. Gather the necessary materials.
2. Strip the ends of the insulated wires.
3. Install the circuit breaker into the board.
4. Install the lamp receptacle, switch and
molding to the board.
5. Attach your wire to the circuit breaker.
6. Attach the wire to the lamp receptacle and
the other ends to the switch.
7. Make sure that the connection of the wires
are correct.
8. Test your electrical circuit board.
9. Design your board.
Conclusion
After the utilization of the activity, we therefore
conclude that the light the bulb produce decreases
as the lighted bulb increases in number. It reduces
the energy from the source which are the cause of
this phenomeno. The reason is that the energy are
being distributed equally among those lighted bulbs
with a limited voltage.
Recommendations
After performing the activity, we therefore
recommend that the experiment should be done
safely. It should be done in working area. Also in
doing the project it is safer if the students have
supervisions from experts. And in experiment
matters, we therefore recommend that it should be
made more complex to test more hypothesis and
find more reason in other phenomena.

You might also like