Sundray Junior Certification Lesson

Products &Equipment first knowledge

Contents
1 Products

2 Equipment first knowledge

Product summary

Home controller
&
software
controller
SHC 110 NAC-100I

Gigabit AC

NAC-210I NAC-220I NAC-230I NAC-238I NAC-260I

10Gigabit AC
NAC-310I NAC-320I NAC-330I NAC-360I
Product summary
In wall AP
Typical scenarios: dormitory,
hotel, ward, etc
S200 S340 S350M S250 S350P

Outdoor AP & 4G AP
Typical scenario: scenic area,
park, wireless city, wireless bridge
S900pro S900plus S910pro S910plus S410V ind
Indoor 11AC AP
Typical scenarios: school, office, S520 （ R3
mall, etc S160 S500 S550 S520 ） S650
Indoor 11 ac wave 2
Typical scenarios: school, office,
high density,
S170 S370 S370D S500pro S560
Indoor AP 11n
Typical scenarios: office school
S150 S220 S400
Product summary

Poe Switch

SI3200-08T-PWR-UN SI3200-10H-PWR S3100-24T-PWR-UN-F SI3200-24H-PWR

Layer3 Switch
S5600-24T-F-RPS

Smart RF
Switch
CAP-S5128 （ poe)

Smart
Switch
RS3300-28T-4F RS3300-52T-4F RS5300-28T-4F RS5300-52T-4F
Controller
Sundray Wireless Controller
万兆型控制器
Software
10Gigabit wireless Controller Gigabits AC series SHC110
AC

NAC-210I NAC-220I
NAC-310I Maximum AP 1280/3840 AP Managing 72/600 AP Managing 144/900

NAC-320I NAC-330I NAC-230I NAC-238I

Maximum AP 1560/4680 Maximum AP 2560/7680 AP Managing 288/1200 Manage 2 APs by Manage 20 APs
AP Managing 480/1300
default, the by default, the
maximum maximum
number of number of
managed APs is managed APs is
256. 20

NAC-360I Maximum AP 4096/12288

NAC-260I AP Managing 560/1600
Sundray Wireless Controller
Sundray Wireless Controller - NAC-I100
installed on a Vmware
comparing to hardware controller, do not support HA, can manage up to 10k AP with 2 free AP license,
only can be deployed in bridge mode

Tested Max AP Tested Max user Hardware

vCPU RAM （ GB ） bandwith
number number disk （ GB ）
150 3000 2 2 5Mbps 128
300 6000 2 2 10Mbps 128
500 10000 2 2 15Mbps 128

1600 32000 2 4 30Mbps 128

2500 30000 4 8 75Mbps 128

5000 75000 8 16 150Mbps 128

Sundray Wireless Controller

 1*WAN ,4* LAN(POE

port)
 Support 802.3 af/at poe
output 55W
 SHC110 only supports
simple PSK and 802.1x
authentication (only one
account), does not support
other features, such as:
application identification
auditing, Marketing, etc.
 Do not need any license
License for NAC
AP unified&centralized
NAC-License-1AP Fee for Licensing 1 AP, Lifetime Licence
management license
Including functions: flow density, customers data analysis, advertisements push,
Market Lic MKT-License-1AP
user profiling, fee for Licensing 1 AP, lifetime License
AC
Normal controller transfer into center controller, the first two branch controllers
unified&centralized NAC-x-License-1AC
management license are free, center controller is x, x stands for AC model.
management license
NAC-x-APPCTL-Lic-1- enable applications and URL identification and filtring function, 1 year licence,
Network access control
Year x stands for AC model.

enable wired internet access management, for wired connected device

Wired Internet Access
NAC-x-AC-LSW-Lic authentication, bandwidth control and application and url filtring( filtring need
Management
application identification license) ; Audit, , x stands for AC model.

NAC-210I enable IPsec VPN, Only the NAC-210I,and NAC-220I need , lifetime
NAC-210i-VPN-Lic
License
VPN Lic
NAC-220I enable IPsec VPN, , Only the NAC-220I,and NAC-220I need , lifetime
NAC-220i-VPN-Lic
License
Access Points
In-Wall AP

S200 S340 S350M S350 S350Pro

Radio Single band dual band dual band dual band dual band
Specifications 2.4G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G,wave2
802.11 b/g/n 802.11a/ b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac 802.11a/ b/g/n/ac
2X2 MIMO 2X2 MIMO 2X2 MIMO 2X2 MIMO 2X2 MU-MIMO
Highest Rate 300Mbps 733Mbps 1167Mbps 1167Mbps 1167 Mbps
Concurrent 60 max 256 max 256 max 256 max 256 max
Users(M/R) 10-20 recommend 20-30 recommend 30-40 recommend 30-40 recommend 30-40 recommend
interfaces WAN ： WAN ： WAN ： WAN ： 1*1000M WAN ： 1*1000M
1*10/100M 1*10/100M 1*10/100M LAN ： 3*1000M LAN ： 3*1000M
LAN ： LAN ： LAN ： 4*10/100M 1 pair RJ11 ports 1 pair RJ11 ports
2*10/100M 2*10/100M 1 pair RJ11 ports
1 pair RJ11 ports 1 pair RJ11 ports
Max Transmit 50mw/17dbm 50mw/17dbm 50mw/17dbm 50mw/17dbm 50mw/17dbm
Power
Power Input POE POE POE/12V Adapter POE/12V Adapter POE/12V Adapter
In-Door AP 11n

S150 S220 S400

Radio Single band single band dual band
Specifications 2.4G 2.4G 2.4G/5G
802.11 b/g/n 802.11 /b/g/n 802.11 a/b/g/n
2X2 MIMO 2X2 MIMO 2X2 MIMO
Highest Rate 300Mbps 300 Mbps 600 Mbps
Concurrent 128 max 128 max 256 max
Users(M/R) 10-20 recommend 50-60 recommend 60-80 recommend
interfaces WAN: 1*10/100Mbps 1*10/100/1000Mbps 1*10/100/1000Mbps
LAN: 2*10/100Mbps 1*console 1*console

Max Transmit 100mw/20dbm 50mw/17dbm 100mw/20dbm

Power
Antenna external antennas Built-in Built-in
Power Input Adapter only POE/12V Adapter POE/12V Adapter
In door AP 11ac

S160 S500 S520 S520R3

Radio dual band dual band dual band three band
Specifications 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5.1G/5.8G
802.11a/ b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n
2X2 MIMO 2X2 MIMO 2X2 MIMO 2X2 MIMO
Highest Rate 733Mbps 1167Mbps 1167 Mbps 3 Gbps
Concurrent Users(M/R) 256 max 256 max 128 max 512 max
50-60 recommend 60-100 recommend 80-120 recommend 120-160 recommend
interfaces 1*10/100Mbps WAN:1*10/100M 1*GE 2*GE, dual uplink
1*USB LAN: 2*10/100Mbps 1*console 1*console
1*console 1*USB 1*USB
Transmit Power 50mw/17dbm 100mw/20dbm 100mw/20dbm 100mw/20dbm
Antenna Built-in external antennas Built-in Built-in
Or Built-in
Power Input POE/12V Adapter POE/12 Adapter POE/12V Adapter POE/12V Adapter
In door AP 11ac

S520 S520 （ R3 ）
 Built-in smart antenna, 2x2 MIMO, Gigabit uplink
 Built-in smart antenna, dual Gigabit uplink
 Support 802.11a/b/g/n/ac protocol, variable frequency AP
 Support 802.11a/b/g/n/ac protocol, dual-band AP
 The maximum transmission rate of the whole machine is up
 The maximum transmission rate of the whole
to 1167Mbps
machine is up to 3G
 Support POE and local dual mode power supply
 Support POE and local dual mode power supply
 Two RF cards can be independently switched to any working
 Support 3 RF, 1 2.4G, 2 5G RF
mode: 2.4G+5G, 2.4G+2.4G, 5G+5G
In door AP 11ac

S550 S410V S650

Radio dual band dual band dual band
Specifications 2.4G/5G 2.4G/5G 2.4G/5G
802.11 a/b/g/n/ac 802.11a/ b/g/n/ac 802.11a/ b/g/n/ac
2X2 MIMO 2X2 MIMO 3X3 MIMO
Highest Rate 1167Mbps 1167Mbps 1750Mbps
Concurrent 256 max 256 max 256 max
Users(M/R) 60-100 recommend 60-80 recommend 80-120 recommend
interfaces 1*GE 1* GE, 1* SIM slot 2* GE, dual uplink
8*RF 1*USB, 1*SD, 2* 4G 1*USB, Bluetooth
1*console 1*console 1*console
Transmit Power 100mw/20dbm 100mw/20dbm 100mw/20dbm

Antenna external antennas Built-in for Wi-Fi Built-in

External for 4G and GPS
Power Input POE/12 Adapter DC 9-32V support ACC POE/12V Adapter
In door AP 11ac

 External omnidirectional antenna, 2x2 MIMO, Gigabit uplink

 Support 802.11a/b/g/n/ac protocol, dual-band AP
 The maximum transmission rate is up to 1167Mbps, 2.4G up to
300Mbps, 5G up to 867Mbps ，
 Support POE and local adapter power supply
 Built-in power splitter with 8 dual-frequency SMA RF ports for 8
feeders

NAP-S550
In door AP 11ac - 4G AP

 Industrial design, shockproof, anti-shedding

 1* SIM/USIM card slot, 2*4G RF interface, 1* GPS RF
interface, 1* SD card slot
 Built-in antenna, 2x2 MIMO, Gigabit Ethernet port
 Support 802.11a/b/g/n/ac protocol, dual-band AP
 The maximum transmission rate is up to 1167Mbps, 2.4G up
to 300Mbps, 5G up to 867Mbps
 Support DC local power supply and ACC power supply

S410V
In door AP 11ac Wave 2

S170 S370&S370D S500pro S560

Radio dual band dual band dual band dual band
Specifications 2.4G/5G wave 2 2.4G/5G wave 2 2.4G/5G wave 2 2.4G/5G wave 2
802.11 a/b/g/n/ac 802.11a/ b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac
2X2 MU MIMO 2X2 MUMIMO 2X2 MU MIMO 4X4 MU MIMO
Highest Rate 1167Mbps 1250Mbps 1167 Mbps 2533 Mbps
Concurrent 256 max 256 max 256 max 512 max
Users(M/R) 50-60 recommend 100-140recommend 60-100 recommend 120-160 recommend
interfaces 2* FE 1* GE, 1*GE 2*GE, 1*SFP
1* USB 1*USB 1*console 1*console
1* console 1*console 1*USB 1*USB
Transmit 50mw/17dbm 100mw/20dbm 100mw/20dbm 100mw/20dbm
Power
Antenna Built-in Built-in Built-in Built-in
(S370D)Directional
Power Input POE/12 Adapter POE/12V Adapter POE/12V Adapter POE/12V Adapter
In door AP 11ac Wave 2

S370 S560

 Built-in smart antenna, 2x2 MIMO, Gigabit uplink  Built-in smart antenna, 4x4 MIMO, Gigabit Combo

 Support 802.11a/b/g/n/ac protocol, wave 2 protocol, dual-  Support 802.11a/b/g/n/ac protocol, wave 2 protocol, dual-

band AP band AP
 The maximum transmission rate of the whole machine is  The maximum transmission rate is up to 2533Mbps, 2.4G up

up to 1267Mbps, 2.4G up to 400Mbps, 5G up to to 800Mbps, 5G up to 1733Mbps

867Mbps  Support POE redundant power supply and local dual mode

 Support POE and local adapter power supply power supply

Out door AP 11ac

S900pro S900plus S910pro S910plus

Radio dual band dual band dual band three band
Specifications 2.4G/5G 2.4G/5G 2.4G/5G wave2 2.4G/5.1G/5.8G wave 2
802.11 a/b/g/n/ac 802.11a/ b/g/n/ac 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac
2X2 MIMO 3X3 MIMO 2X2 MU-MIMO 4X4 MU-MIMO
Highest Rate 1167Mbps 1750Mbps 1267 Mbps 3 Gbps
Concurrent 256 max 256 max 256max 512 max
Users(M/R) 60-100 recommend 80-120 recommend 60-100 recommend 120-160 recommend
interfaces 1*GE, 1* SFP 1* GE, 1*GE PSE, 1*GE, 1* SFP 1*GE, 1* SFP
1*Micro-USB console 1* SFP 1*Micro-USB 1*Micro-USB console
1*Micro-USB console
console
Transmit Power 500mw/27dbm 500mw/27dbm 500mw/27dbm 500mw/27dbm
Antenna external antennas external antennas external antennas external antennas
or Built-in and Built-in or Built-in or Built-in
Power Input POE only POE/220v AC POE only POE only
Outdoor AP

 IP 68 professional waterproof and dustproof design, -40~70°C

super span working temperature
 Built-in directional antenna or external antenna it ,there are 2
models 2x2 MIMO
 One gigabit optical port, two gigabit electrical ports
 Support 802.11a/b/g/n/ac protocol, outdoor dual-band AP
 The maximum transmission rate of the whole machine is up to
1167Mbps, 2.4G up to 300Mbps, 5G up to 867Mbps
 Support POE power supply

S900pro
Outdoor AP

 IP 68 professional waterproof and dustproof design, -40~70°C

super span working temperature
 Built-in directional antenna and support external 6 N-type antenna
interfaces, 3x3 MIMO
 One gigabit optical port, two gigabit electrical ports
 Support 802.11a/b/g/n/ac protocol, outdoor dual-band AP
 The maximum transmission rate of the whole machine is up to
1750Mbps, 2.4G up to 450Mbps, 5G up to 1300Mbps
 Support POE power supply or local 220v AC power supply

S900plus
Switch
POE Switch
 8 10/100/1000M electrical ports (8 POE ports)
 Support IEEE 802.3af/at power supply standard, single port maximum output power 30W
 The maximum POE output power of the whole machine is 120W, and the maximum
support is 8 ports of af/15.4W output or 4 ports of at/30W output.
 The power transmission distance of the network cable can be up to 100 meters, which can
SI3200-08T-
flexibly expand the network without being restricted by the power line layout.
PWR-UN

 8 10/100/1000M electrical ports (8 POE ports), 2 Gigabit SFP optical ports

 Support IEEE 802.3af/at power supply standard, single port maximum output power 30W
 The maximum POE output power of the whole machine is 120W, and the maximum
support is 8 ports of af/15.4W output or 4 ports of at/30W output.
 Support port power supply priority to ensure continuous power supply to key nodes of the
SI3200-10H- network
PWR  The power transmission distance of the network cable can be up to 100 meters, which can
flexibly expand the network without being restricted by the power line layout.
POE Switch
 24 10/100/1000M electrical ports (24 POE ports), 4 Gigabit SFP optical ports
 Support IEEE 802.3af/at power supply standard, single port maximum output power 30W
 The maximum POE output power of the whole machine is 370W
 Support port power supply priority to ensure continuous power supply to key nodes of the
network
 The power transmission distance of the network cable can be up to 100 meters
SI3200-24H-PWR
 24 10/100M electrical ports (24 POE ports), 2 Gigabit SFP optical ports and 2 Gigabit electrical
ports (Combo port, optical multiplexing)
 Support IEEE 802.3af/at power supply standard, single port maximum output power 30W
 The maximum POE output power o is 384W, and the maximum support is 24 ports of af/15.4W
output or 12 ports of at/30W output.
 Support port power supply priority to ensure continuous power supply to key nodes of the networ
S3100-24T-PWR-UN-F  The power transmission distance of the network cable can be up to 100 meters
Layer3 10Gigabit Switch （ No POE ）

 24 Gigabit Ethernet ports + 4 Gigabit optical ports + 4 10

Gigabit optical ports
 Full line speed forwarding. Switching capacity 368Gbps,
packet forwarding rate 274Mpps
 Support for network protocols. IPV6, 802.1d/w/s spanning
tree, RIPv1/2, OSPF, BGP, IGMP, PIM, etc.
 Support for complete ACL policies. According to
source/destination IP, source/destination MAC address, IP,
TCP/UDP port number, etc.
S5600-24T-F-RPS  QoS strategy. DiffServ model, WRR/SP/SWRR scheduling,
DSCP and IP precedence
 Network management. Support SNMP, CLI, WEB, support
RMON, SMTP, SSH
Smart RF Switch （ POE ）

 24 Gigabit electrical ports + 4 thousand / 10 Gigabit optical

ports, support POE power supply
 Support all Sundray AP
 The AP is plug-and-play. The wireless controller only needs to
manage the intelligent switching host. One host occupies one
Licence of the wireless controller. The sub-AP does not need to
be separately authorized. It does not need to be managed
separately, no software upgrade, and no configuration is
required.
CAP-S5128
 After activation, the radio information of all ports is displayed
by default, and each port can move packets.
Smart Switch （ No POE ）

 Does not support POE power supply

 RS3300-28T-4F and RS3300-52T-4F do not support 10G
optical ports
 RS5300-28T-4F and RS5300-52T-4F support 10G optical
ports
 28T-4F: 24 electrical ports + 4 optical ports
 52T-4F: 48 electrical ports + 4 optical ports

RS3300-28T-4F
RS3300-52T-4F
RS5300-28T-4F
RS5300-52T-4F
Outdoor AP accessories
Outdoor feeder

outdoor AP Ethernet port lighting arrester

Data In:to Power
Switch Out:to AP

室外 AP 馈线

POE injector
Power splitter accessories

Indoor power split AP feeder: long

feeder is used to connect AP and ANT-2451-4dBi-O-SMA-CM-P2
antenna （ Recommended ）

ANT-2451-4dBi-O-SMA-P2
1 splitterred to 4

 One to 4, dual frequency dual stream, higher performance

After extending the two antennas into one room at the same time after the
power split, it can provide
Coverage of 2.4G and 5.8G signals and support 2*2 MIMO.

Items:
1. A power split AP (S550);
2, eight long feeders (connecting AP and antenna);
3. Four dual-frequency dual-stream indoor antennas.

Note: If you only cover less than 4 rooms, you need to increase the RF load, connector
type: RP-SMA.
Use: When the 8 output connectors of the power splitter have 1 or more antennas that
are not connected, these free connectors need to be installed with this RF load
accessory, otherwise the RF signal will be reflected back to the AP, resulting in AP
damage.
1 splitterred to 8
 One to 8, double frequency single stream, more room
coverage
It can cover up to 8 rooms at the same time, each room Can
have 2.4G and 5G signal coverage at the same time, support
1*1 MIMO.
No dead angle in room
during deployment. Turn off the MIMO function of the AP in
AC controller

Configuration:
1. A power point AP (NAP-3680)
2, eight long feeders (connecting AP and antenna)
3, eight dual-frequency single-flow indoor antenna
Note: If you cover less than 8 rooms, you need to increase the RF load,
connector type: RP-SMA.
Use: When the 8 output connectors of the power splitter have one or more
unconnected antennas, these free connectors need to be installed with this
RF load accessory, otherwise the RF signal will be reflected back to the AP,
resulting in AP damage.
Contents
1 Products

2 Equipment first knowledge

Equipment first knowledge

Console Port ， USB port, manageme

Debug or debug or nt User
communication password data
(SMS module) recovery port
Login AC
 UI ： web console
 Login ： https
 MANAGE port default address: 10.252.252.252
 Default username password: admin/admin

The management PC address

should be on the
10.252.252.252/24 10.252.252.0/24 subnet

10.252.252.1/24

Enter https://10.252.252.252
in your browser to log in web console
Controller password and configuration recovery

 Password recovery

Password recovery: Find a USB disk, in which built a file called reset-password.txt, and then the U disk inserted into NAC,
restart the NAC and take the u disk off, finished pulling down, U disk will automatically add a log file, which wrote the new
password is admin. (do not need any other operations, the device will not automatically restart) U disk requirements are
FAT32 format, if there are multiple partitions, the put file into the root partition.

 To restore the factory

Use the loop line, directly connected to eth0, power on the NAC, NAC will restore the default
configuration, at this time, NAC will not automatically restart, also do not need to manually restart.
How to make a loop line : Get a ordinary a crossover cable, get rid of one crystal head , the 1-3 docking,
2-6 docking, then use another head.
Fit AP switches to fat AP
 Switching method

Switch step
1) Download the latest version of the diagnostic tool (troubleshoot), the computer and AP
directly connected or connected in the same layer 2 network, scan AP
2) After scanning to AP, click [Tools - Mode Switch], select mode switch selection: fat mode,
click OK
3) After the system restart is completed, the entire upgrade process is completed.

 Verification

The diagnostic tool rescans and the display mode is: fat mode, that is, the switch is successful.
Fat AP switches to fit AP
Switching method

Upgrade step
1) Download the latest version of the diagnostic tool (troubleshoot), the computer and AP
directly connected or connected in the same two-tier environment, scan AP
2) After scanning to AP, click [Tools - Batch Mode Switch], select mode switch selection: thin
mode, click OK
3) After the system restart is completed, the entire upgrade process is completed.

Verification

The diagnostic tool rescans and the display mode is: fit mode, that is, the switch is successful.
Q&A
SUNDRAY Thank You

Sundray Technology Community ： bbs.sundray.com.cn