Scribd
Upload
46 views37 pages

Week # 1 MR Chapter 1: - Tutorial #1

This document provides an overview of key concepts from Chapter 1 of Martin Rhodes' Introduction to Particle Technology textbook. It discusses various methods for describing the size of individual particles and particle populations, including equivalent diameters, distributions, and measures of central tendency. It also outlines common techniques for measuring particle size, such as sieving, microscopy, sedimentation, permeametry, and electrozone sensing.

Uploaded by

Christina Joana Guzman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
46 views37 pages

Week # 1 MR Chapter 1: - Tutorial #1

This document provides an overview of key concepts from Chapter 1 of Martin Rhodes' Introduction to Particle Technology textbook. It discusses various methods for describing the size of individual particles and particle populations, including equivalent diameters, distributions, and measures of central tendency. It also outlines common techniques for measuring particle size, such as sieving, microscopy, sedimentation, permeametry, and electrozone sensing.

Uploaded by

Christina Joana Guzman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 37

Week # 1

MR Chapter 1

• Tutorial #1 MARTIN RHODES (2008)


• MR #1.1, 1.4, 1.7. Introduction to Particle
Technology , 2nd Edition.
• To be discussed on Jan. 23 Publisher John Wiley & Son,
2019. Chichester, West Sussex,
• By either volunteer or England.
class list.
• Describing the size of a
single particle. Some
terminolgy about
diameters used in
microscopy.

• Equivalent circle
diameter.

• Martin’s diameter.

• Feret’s diameter.

• Shear diameter.
Describing the size of a single particle
• Regular-shaped particles

• The orientation of the particle on the


microscope slide will affect the
projected image and consequently the
measured equivalent sphere diameter.
• Sieve measurement: Diameter of a
sphere passing through the same sieve
aperture. Comparison of equivalent sphere diameters.
• Sedimentation measurement:
Diameter of a sphere having the same
sedimentation velocity under the
same conditions.
Comparison of equivalent diameters
• The volume equivalent sphere diameter is a commonly used equivalent
sphere diameter.
• Example: Coulter counter size measurement. The diameter of a sphere
having the same volume as the particle.
• Surface-volume diameter is the diameter of a sphere having the same
surface to volume ratio as the particle.

(Example)
Shape

Cuboid
Cylinder

Cuboid: side lengths of 1, 3, 5.


Cylinder: diameter 3 and length 1.
Description of populations of particles

• Typical differential
frequency distribution

dF  f ( x) F: Cumulative distribution,
integral of the frequency distribution.
dx
• Typical cumulative frequency distribution
• For a given population of particles,
the distributions by mass, number
and surface can differ dramatically.

• All are smooth continuous curves.

• Size measurement methods often


divide the size spectrum into size
ranges, and size distribution becomes
a histogram.

• Comparison between distributions


Conversion between distributions
• Mass and number distributions for man-made objects orbiting the earth
f s dx 
•Total number of particles, N and total surface area S
are constant.
•Particle shape is
independent of size,
as is constant.
( x 3a v ) Nf N ( x)dx
f v dx 
V
V is the total volume of the
particle population and av is
the factor relating the linear
dimension of particle to its
volume.
Assumptions for conversions among
different distribution functions
• It is necessary to make assumptions about the
constancy of shape and density with size.
• Calculation errors are introduced into the
conversions.
• Example: 2% error in FN results in 6% error in
FM. (Recalling the relationship between mass and
diameter).
• If possible, direct measurements be made with the
required distribution.
Describing the population by a single number

• Definitions of means
• Plot of cumulative frequency against weighting function
g(x). Shaded area is

Number-length mean: Arithmetic


mean of the number distribution
conserves the number and length
of population.
• Comparison between measures of
central tendency. Adapted from
Rhodes (1990).

• Surface-volume mean, Sauter


mean: Arithmetic mean of surface
distribution conserves the surface
and volume of population.

• The values of the different


expressions of central tendency
can vary significantly.

• Two quite different distributions


could have the same arithmetic
mean or median.
Equivalence of means

Ks and Kv do not vary with size

Same Expression
dFs  x ks dFN2
Common methods of displaying size
distributions
Arithmetic-normal Distribution

Log-normal Distribution
z  log x
z: Arithmetic mean of z, sz: standard deviation of log x

Arithmetic-normal distribution with an arithmetic mean of 45 and standard deviation of 12.


• Log-normal distribution plotted on linear coordinates

• Log-normal distribution plotted on logarithmic coordinates


Methods of particle size measurements:
Sieving
• Sieving: Dry sieving using woven wire sieves is
appropriate for particle size greater than 45 mm.
The length of the particle does not hinder it
passage through the sieve aperture.
• Most common modern sieves are in sizes such that
the ratio of adjacent sieve sizes is the fourth
root of two (e.g. 45, 53, 63, 75, 90, 107 mm).
Methods of particle size measurements:
Microscopy
• The optical microscope may be used to measure particle
size down to 5 mm.
• The electron microscope may be used for size analysis
below 5 mm.
• Coupled with an image analysis system, the optical and
electron microscopy can give number distribution of size
and shape.
• For irregular-shaped particles, the projected area offered to
the viewer can vary significantly. Technique (e.g. applying
adhesive to the microscope slide) may be used to ensure
“random orientation”.
Methods of particle size measurement
•Rep <0.3. Motion of the
particle obeys Stoke’s law.
• Sedimentation
•The suspension is
sufficiently dilute (No
hindered settling).

•Particles are assumed to


accelerate rapidly to their
terminal free fall velocity,
time for acceleration is
negligible.

• Size analysis by sedimentation


Co: original uniform suspension density.

Sampling point: C at time t after the start of settling.

At time t all particles traveling faster than h/t will


have fallen below the sampling point.

C represents the suspension density for all particles


which travel at a velocity <= h/t.

• Permeametry

See Example 1.3 The diameter calculated from the Carman-Kozeny equation is the
arithmetic mean of the surface distribution.
• Electrozone sensing

As particle flow through


the orifice,
a voltage pulse is recorded.

The amplitude of the pulse


can be related to the
volume of particle the
orifice.

Particle range:
0.3-1000 mm.

• Schematic of electrozone sensing apparatus

You might also like