PROTOCOLS

Now let us see how the data link layer can

combine flow control , and error control to
achieve the delivery of data from one node to
another . The protocols are normally implemented
in software by using one of the common
programming languages.
Stop-and-Wait ARQ
PROTOCOLS
Go-Back-N ARQ

Selective Repeat ARQ

 Stop-and-Wait ARQ
 It is the simplest flow and error control mechanism . A
transmitter sends a frame then stops and waits for an
acknowledgment.
 Stop-and-Wait ARQ has the following features:
The sending device keeps a copy of the sent frame
transmitted until it receives an acknowledgment( ACK)
The sender starts a timer when it sends a frame. If an
ACK is not received within an allocated time period, the
sender resends it
Both frames and acknowledgment (ACK) are numbered
alternately 0 and 1( two sequence number only)
This numbering allows for identification of frames in
case of duplicate transmission
 Stop-and-Wait ARQ
 The acknowledgment number defines the number of
next expected frame. (frame 0 received ACK 1 is sent)
 A damage or lost frame treated by the same manner by
the receiver
 If the receiver detects an error in the received frame, or
receives a frame out of order it simply discards the
frame
 The receiver send only positive ACK for frames
received safe; it is silent about the frames damage or
lost.
 The sender has a control variable Sthat holds the
number of most recently sent frame (0 or 1). The
receiver has control variable R, that holds the number
of the next frame expected (0,or 1)
 Stop-and-Wait ARQ

Cases of Operations:

1. Normal operation
2. The frame is lost
3. The Acknowledgment (ACK) is lost
4. The Ack is delayed
 Stop-and-Wait ARQ
Normal operation

 The sender will not

send the next frame
until it is sure that
the current one is
correctly receive
 sequence number is
necessary to check
for duplicated
frames
 1. Stop and Wait ARQ

2. Lost or damaged frame

 A damage or lost frame

treated by the same
manner by the receiver.

 No NACK when frame is

corrupted / duplicate
 Stop-and-Wait ARQ
3. Lost ACK frame

 Importance of frame
numbering
 Note

In Stop and-Wait ARQ, numbering frames

prevents the retaining of duplicate frames.

10.
 Stop-and-Wait ARQ
4. Delayed ACK and lost frame

 Importance of frame
numbering
 Note

Numbered acknowledgments are needed if an

acknowledgment is delayed and the next frame
is lost.

10.
 Piggybacking ( Bidirectional transmission)

Is a method to combine a data frame with an

acknowledgment.
It can save bandwidth because data frame and an
ACK frame can combined into just one frame
 Stop-and-Wait ARQ

After each frame sent the host must wait for an ACK
inefficient use of bandwidth

To improve efficiency ACK should be sent after multiple

frames

Alternatives: Sliding Window protocol

 Go-back-N ARQ
 Selective Repeat ARQ
 Pipelining

Pipelining: A task is begun before the previous task

has ended

 There is no pipelining in stop and wait ARQ

because we need to wait for a frame to reach the
destination and be acknowledged before the next
frame can be sent
 Pipelining improves the efficiency of the
transmission
 Sliding window protocol
Sliding window protocols apply Pipelining :
Go-Back-N ARQ
Selective Repeat ARQ
 Sliding window protocols improve the efficiency
 multiple frames should be in transition while
waiting for ACK. Let more than one frame to be
outstanding.
 Outstanding frames: frames sent but not
acknowledged
 We can send up to W frames and keep a copy of
these frames(outstanding) until the ACKs arrive.
 This procedures requires additional feature to be
added :sliding window
Sliding window
 Go_Back _N ARQ

Sender sliding window

If m = 3; sequence
numbers = 8 and window
size =7

Acknowledged frames
 Go_Back _N ARQ

Receiver sliding window

 The receive window is an abstract concept defining
an imaginary box of size 1 with one single variable
Rn.
 The window slides when a correct frame has arrived;
sliding occurs one slot at a time.
 Go-Back-N ARQ
control variables
Outstanding frames: frames sent but
not acknowledged

S: hold the sequence number of the recently sent frame

SF: holds sequence number of the first frame in the
window
SL: holds the sequence number of the last frame
R: sequence number of the frame expected to received
Go-Back-N ARQ
 Go-Back-N ARQ
In Go-Back-N ARQ we use one timer for the first outstanding
frame
 The receiver sends a positive ACK if a frame has arrived
safe and in order.
 if a frame is damaged or out of order ,the receiver is silent
and will discard all subsequent frames
 When the timer of an unacknowledged frame at the sender
site is expired , the sender goes back and resend all frames
, beginning with the one with expired timer.( that is why the
protocol is called Go-Back-N ARQ)
 The receiver doesn't have to acknowledge each frame
received . It can send cumulative Ack for several frame
 Go-Back-N ARQ

Example: The sender has sent frame 6 , and timer expires

for frame 3( frame 3 has not been acknowledge); the
sender goes back and resends frames 3, 4,5 and 6
 Go-Back-N ARQ
Normal operation

 How many frame scan

be transmitted Without
acknowledgment?
 ACK1 is not necessary
if ACK2 is sent:
Cumulative ACK
 Go-Back-N ARQ

Damage or Lost Frame

Correctly received out

of order packets are not
Buffered
What is the
disadvantage of this?
 Go-Back-N ARQ

Bidirectional transmission : piggybacking

As Stop-and-Wait we can use piggybacking to improve the

efficiency of bidirectional transmission . Each direction
needs both a sender window and a receiver window.
 Note

Stop-and-Wait ARQ is a special case of Go-

Back-N ARQ in which the size of the send
window is 1

10.
 Selective Repeat ARQ

Go-Back-N ARQ is inefficient of a noisy link.

 In a noisy link frames have higher probability of damage ,

which means the resending of multiple frames.
 this resending consumes the bandwidth and slow down the
transmission .
Solution:
 Selective Repeat ARQ protocol : resent only the damage
frame
 It defines a negative Acknolgment (NAK) that report the
sequence number of a damaged frame before the timer
expires
 It is more efficient for noisy link, but the processing at the
receiver is more complex
Selective Repeat ARQ
Selective Repeat ARQ
m=2
Lost Frame Sequences no=2^m =4
: 0,1,2 ,3
Window size =2m/2=
4/2=2
Selective Repeat ARQ
 Note

In Selective Repeat ARQ, the size of In the

sender and receiver window must be at
most one-half of 2m.

10.
Selective Repeat ARQ
m=2