PL/SQL

 Introduction
 Structure of a block
 Variables and types
 Accessing the database
 Control flow
 Cursors
 Exceptions
 Procedures and functions
8/22/2019
 Introduction
 PL/SQL stands for Procedural Language/SQL.

 PL/SQL extends SQL by adding constructs found in

procedural languages, resulting in a structural language
that is more powerful than SQL.

 The basic unit in PL/SQL is a block. All PL/SQL

programs are made up of blocks, which can be nested
within each other. Typically, each block performs a
logical action in the program.

8/22/2019
 PL/SQL Environment

8/22/2019
 Benefits
• Integrate of database technology and
procedural programming capabilities
 Provide improved performance of an
application
• Modularize program development
• Portable among host environments
supporting Oracle server and PL/SQL
 Handle errors

8/22/2019
 Structure of a block
DECLARE
/* Declarative section: variables, types, cursors,
user-defined exceptions */
BEGIN
/* Executable section: procedural and SQL statements
go here. */
/* This is the only section of the block that is
required. */
EXCEPTION
/* Exception handling section: error handling
statements go here. */
END; /* mandatory */

8/22/2019
 Block (1)
 The only SQL statements allowed in a
PL/SQL program are SELECT, INSERT,
UPDATE, DELETE and several other data
manipulation statements plus some
transaction control.

 Data
definition statements like CREATE,
DROP, or ALTER are not allowed.

 The executable section also contains

constructs such as assignments,
branches, loops, procedure calls, and
triggers
8/22/2019
 Block (2)
 PL/SQL is
not case sensitive. C style
comments (/* ... */) may be used.

 To execute a PL/SQL program, we must

follow the program text itself by: a line with
a single dot ("."), and then a line with “run”;
or a line with “/”

 We can invoke a PL/SQL program either

by typing it in sqlplus or by putting the
code in a file and invoking the file
8/22/2019
 Variables and Types (1)
 Information is transmitted between a
PL/SQL program and the database
through variables.
 Every variable has a specific type
associated with it, that can be:
 One of the types used by SQL for database
columns
 A generic type used in PL/SQL such as

NUMBER
 Declared to be the same as the type of some

8/22/2019database column
 Variables and Types (2)

 The most commonly used generic type is

NUMBER. Variables of type NUMBER can
hold either an integer or a real number.
 The most commonly used character string
type is VARCHAR(n), where n is the
maximum length of the string in bytes. This
length is required, and there is no default.

8/22/2019
 Example
DECLARE
price NUMBER;
myBeer VARCHAR(20);

8/22/2019
 Declaring Boolean variables
 Only the values TRUE, FALSE, and NULL
can be assigned to a Boolean variable.
• The variables are compared by the logical
operators AND, OR, and NOT.
• The variables always yield TRUE, FALSE,
or NULL.
• Arithmetic, character, and date expressions
can be used to return a Boolean value.
8/22/2019
 Example
DECLARE
v_flag BOOLEAN := FALSE;
BEGIN
v_flag := TRUE;
END;

8/22/2019
 The %TYPE attribute
 A PL/SQL variable can be used to manipulate data
stored in a existing relation.
 The variable must have the same type as the relation
column. If there is any type mismatch, variable
assignments and comparisons may not work the way
you expect.
 To be safe, instead of hard coding the type of a variable,
you should use the %TYPE operator.
Ex:
DECLARE myBeer Beers.name%TYPE;
gives PL/SQL variable myBeer whatever type was
declared for the name column in relation Beers.

8/22/2019
 The %ROWTYPE attribute
 A variable may also have a type that is a record with
several fields.
 The simplest way to declare such a variable is to use
%ROWTYPE on a relation name. The result is a record
type in which the fields have the same names and types
as the attributes of the relation.
Ex:
DECLARE beerTuple Beers%ROWTYPE;

makes variable beerTuple be a record with fields name

and manufacture, assuming that the relation has the
schema Beers(name, manufacture).

8/22/2019
 Default values and assignments
 The initial value of any variable, regardless of its type, is
NULL.
 We can assign values to variables, using the ":=" operator.
 The assignment can occur either immediately after the type
of the variable is declared, or anywhere in the executable
portion of the program.
Ex:
DECLARE
a NUMBER := 3;
BEGIN
a := a + 1;
END;
.
run;

8/22/2019
 Bind variables
 Variable that you declare in a host
environment (ex: SQL*Plus), used to pass
run-time values (number or characters)
into or out of PL/SQL programs
 The only kind that may be printed with a
print command.
 Bind variables must be prefixed with a
colon in PL/SQL statements

8/22/2019
 Steps to create a bind variable
1. We declare a bind variable as follows:
VARIABLE <name> <type>
where the type can be only one of three
things: NUMBER, CHAR, or CHAR(n).
2. We may then assign to the variable in a
following PL/SQL statement, but we must
prefix it with a colon.
3. Finally, we can execute a statement :
PRINT :<name>;
outside the PL/SQL statement
8/22/2019
 Example
VARIABLE
x NUMBER
BEGIN
:x := 1;
END;
.
run;
PRINT :x;
8/22/2019
 DBMS_OUTPUT.PUT_LINE
package
 An Oracle-supplied packaged procedure
 An alternative for displaying data from a PL/SQL block
 Must be enabled in SQL*Plus with: SET SERVEROUTPUT ON

8/22/2019
 Simple programs accessing the
database
 The simplest form of program has some
declarations followed by an executable section
consisting of one or more of the SQL statements
with which we are familiar.
 After the SELECT clause, we must have an INTO
clause listing variables, one for each attribute in the
SELECT clause, into which the components of the
retrieved tuple must be placed.
 The SELECT statement in PL/SQL only works if the
result of the query contains a single tuple. If the
query returns more than one tuple, you need to use
a 8/22/2019
cursor
 Example (SQL)
CREATE TABLE T1(
e INTEGER,
f INTEGER );

DELETE FROM T1;

INSERT INTO T1 VALUES(1, 3);

INSERT INTO T1 VALUES(2, 4);

8/22/2019
 Example (PL/SQL)
DECLARE
a NUMBER;
b NUMBER;
BEGIN
SELECT e,f INTO a,b FROM T1 WHERE e>1;
INSERT INTO T1 VALUES(b,a);
END;
.
run;

8/22/2019
 Control flow
 PL/SQL allows you to branch and create loops in a fairly
familiar way.
 An IF statement looks like:
IF <condition> THEN <statement_list>
ELSE <statement_list>
END IF;
 The ELSE part is optional. If you want a multiway branch,
use:
IF <condition_1> THEN ...
ELSIF <condition_2> THEN ... ... ...
ELSIF <condition_n> THEN ...
ELSE ...
END IF;
8/22/2019
 Example
DECLARE
a NUMBER;
b NUMBER;
BEGIN
SELECT e,f INTO a,b FROM T1 WHERE e>1;
IF b=1 THEN
INSERT INTO T1 VALUES (b,a);
ELSE
INSERT INTO T1 VALUES (b+10,a+10);
END IF;
END;
.
run;

8/22/2019
 Loops
 Loops are created with the following:
LOOP
<loop_body> /* A list of
statements. */
END LOOP;

 At least one of the statements in

<loop_body> should be an EXIT statement
of the form
EXIT WHEN <condition>;

The
8/22/2019 loop breaks if <condition> is true.
 Example
DECLARE
i NUMBER := 1;
BEGIN
LOOP
INSERT INTO T1 VALUES (i,i);
i := i+1;
EXIT WHEN i>100;
END LOOP;
END;
.
run;

8/22/2019
 Other useful loop-forming
statements
 A WHILE loop can be formed with:
WHILE <condition> LOOP
<loop_body>
END LOOP;
 A simple FOR loop can be formed with:
FOR <var> IN <start>..<finish> LOOP
<loop_body>
END LOOP;
 Here, <var> can be any variable; it is local to the for-loop and
need not be declared. Also, <start> and <finish> are
constants.

8/22/2019
 Cursors
 A cursor is a variable that runs through the
tuples of some relation.
 Can be a stored table or the answer to some
query.
 By fetching into the cursor each tuple of
the relation, we can write a program to
read and process the value of each such
tuple.
 If the relation is stored, we can also
update or delete the tuple at the current
cursor position.
8/22/2019
 Example (1)
Uses T1(e,f) whose tuples are pairs of
integers.
The program will delete every tuple whose
first component is less than the second,
and insert the reverse tuple into T1.

8/22/2019
 Example (2)
DECLARE
/* Output variables to hold the result of the query: */
a T1.e%TYPE;
b T1.f%TYPE;
/* Cursor declaration: */
CURSOR T1Cursor IS
SELECT e, f FROM T1 WHERE e < f
FOR UPDATE;
BEGIN
OPEN T1Cursor;
LOOP /* Retrieve each row of the result of the above
query into PL/SQL variables: */
FETCH T1Cursor INTO a, b;
/* If there are no more rows to fetch, exit the loop: */
EXIT WHEN T1Cursor%NOTFOUND;
/* Delete the current tuple: */
DELETE FROM T1 WHERE CURRENT OF T1Cursor;
/* Insert the reverse tuple: */
INSERT INTO T1 VALUES(b, a);
END LOOP;
/* Free cursor used by the query. */
CLOSE
8/22/2019 T1Cursor;
 Exceptions
 An exception is an identifier in PL/SQL that
is raised during execution.
• How is it raised?
– An Oracle error occurs.
– You raise it explicitly.
• How do you handle it?
– Trap it with a handler.
– Propagate it to the calling environment.
8/22/2019
 Handling exceptions

8/22/2019
 Exception types

8/22/2019
 Trapping exceptions
Syntax:
EXCEPTION
WHEN exception1 [OR exception2 . . .] THEN
statement1; /* one or more PL/SQL or SQL
statements */
statement2;
. . .
[WHEN exception3 [OR exception4 . . .] THEN
statement1;
statement2;
. . .]
[WHEN OTHERS THEN
statement1;
statement2;
. . .]
 Only one handler is processed
 WHEN OTHERS is unique and must be the last handler
8/22/2019
Trapping pre-defined Oracle server
errors
 Reference the standard name in the
exception handling routine.
• Sample predefined exceptions:
– NO_DATA_FOUND
– TOO_MANY_ROWS
– INVALID_CURSOR
– ZERO_DIVIDE
– DUP_VAL_ON_INDEX
8/22/2019
 Functions for Trapping
Exceptions
 When an exception occurs, you can identify the associated
error code or error message by using two functions.
 Based on the values of the code or message, you can
decide which subsequent action to take based on the error.
– SQLCODE: Returns the numeric value for the error code
– SQLERRM: Returns the message associated with the
error number
 Examples of SQLCODE values:
 0: no exception encountered

 1: user-defined exception

 +100: NO_DATA_FOUND_EXCEPTION

 Negative number: another Oracle server error number

8/22/2019
 Example

8/22/2019
 Trapping Nonpredefined Oracle
Server Errors

8/22/2019
 Example

8/22/2019
 Trapping User-Defined
Exceptions

8/22/2019
 Example

8/22/2019
 Propagating exceptions

8/22/2019
 RAISE_APPLICATION_ERROR
Procedure
 Syntax:
raise_application_error (error_number,
message[, {TRUE | FALSE}]);

• You can use this procedure to issue user-error

messages from stored subprograms.
• You can report errors to your application and avoid
returning unhandled exceptions.
 Used in two different places:
– Executable section
– Exception section
• Returns error conditions to the user in a manner
consistent with other Oracle server errors
8/22/2019
 Example

8/22/2019
 Procedures (1)
 Behave very much like procedures in other
programming language
 A procedure is introduced by the keywords
CREATE PROCEDURE followed by the
procedure name and its parameters.
 CREATE may be followed by OR
REPLACE.
 If the procedure is already created, we will not
get an error
 If the previous definition is a different procedure
with the same name, the old procedure will be
lost.
8/22/2019
 Procedures(2)
 Can have any number of parameters, each followed by a
mode and a type. The possible modes are:
 IN (read-only), OUT (write-only), and INOUT (read+write).
 The type specifier in a parameter declaration must be
unconstrained
• CHAR(10) and VARCHAR(20) are illegal; CHAR or
VARCHAR should be used instead. The actual length of a
parameter depends on the corresponding argument that
is passed in when the procedure is invoked.
 Following the arguments is the keyword AS (IS is a
synonym). Then comes the body, which is essentially a
PL/SQL block.
 The DECLARE section should not start with the keyword
DECLARE. Rather, following AS we have:
... AS <local_var_declarations>
BEGIN
<procedure_body>
8/22/2019 END; /
 Example
Addtuple1: given an integer i, inserts the tuple (i, 'xxx') into the
following example relation:

CREATE TABLE T2 (a INTEGER, b CHAR(10) );

CREATE PROCEDURE addtuple1(i IN NUMBER) AS

BEGIN
INSERT INTO T2 VALUES(i, 'xxx');
END;
.
run;

8/22/2019
 Executing procedures
 The “run” at the end runs the statement that creates the
procedure; it does not execute the procedure.
 To execute the procedure, use another PL/SQL
statement, in which the procedure is invoked as an
executable statement.
Ex:
BEGIN
addtuple1(99);
END; /
 Or invoke the “execute” command
Ex:
EXECUTE addtuple1(99);

8/22/2019
 Another example
CREATE PROCEDURE addtuple2( x T2.a%TYPE, y
T2.b%TYPE) AS
BEGIN
INSERT INTO T2(a, b) VALUES(x, y);
END;
.
run;
/* to add a tuple (10, 'abc') to T2 */
BEGIN
addtuple2(10, 'abc');
END; . run;

8/22/2019
 OUT and INOUT parameters
 Assigningvalues to parameters declared
as OUT or INOUT causes the
corresponding input arguments to be
written.
 Because of this, the input argument for an
OUT or INOUT parameter should be
something with an "lvalue”.
 A constant or a literal argument should not
be passed in for an OUT/INOUT
parameter.
8/22/2019
 Example
CREATE TABLE T3 (a INTEGER, b INTEGER );

CREATE PROCEDURE addtuple3(a NUMBER, b OUT

NUMBER) AS
BEGIN
b := 4;
INSERT INTO T3 VALUES(a, b);
END;
. run;

DECLARE
v NUMBER;
BEGIN
addtuple3(10, v);
END; . run;
8/22/2019
 Procedures and Functions
 We can also write functions instead of procedures. In a function
declaration, we follow the parameter list by RETURN and the
type of the return value:
CREATE FUNCTION <func_name>(<param_list>) RETURN
<return_type> AS ...
 In the body of the function definition, "RETURN <expression>;"
exits from the function and returns the value of <expression>.
 To find out what procedures and functions you have created,
use the following SQL query:
select object_type, object_name from user_objects
where object_type = 'PROCEDURE' or object_type
= 'FUNCTION';
 To drop a stored procedure/function:
drop procedure <procedure_name>;
drop function <function_name>;
8/22/2019
 Discovering errors
 PL/SQL does not always tell you about
compilation errors. Instead, it gives you a
cryptic message such as "procedure
created with compilation errors". If you
don't see what is wrong, try issuing the
command:
show errors procedure
<procedure_name>;
 Alternatively, you can type:
SHO ERR (short for SHOW ERRORS)
to see the most recent compilation error.
8/22/2019
 References
 Notes from Univ. Of Stanford: “Using
Oracle PL/SQL”,
http://www-db.stanford.edu/~ullman/fcdb/oracle/or-plsql.html
 “Oracle 9i: Program with PL/SQL”, Instructor Guide,
Volume 1, ORACLE

8/22/2019