Scribd
Upload
72 views

Lecture PLC

This document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs are similar to microcontrollers but designed for industrial applications. PLCs were developed to simplify control automation using relays and are now widely used across industries. The document describes basic PLC components like the central processing unit, memory, and input/output modules. It also covers programming PLCs using ladder logic and common applications of PLCs like timers, counters, and motor protection.

Uploaded by

ameer kannan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
72 views

Lecture PLC

This document provides an overview of programmable logic controllers (PLCs). It discusses that PLCs are similar to microcontrollers but designed for industrial applications. PLCs were developed to simplify control automation using relays and are now widely used across industries. The document describes basic PLC components like the central processing unit, memory, and input/output modules. It also covers programming PLCs using ladder logic and common applications of PLCs like timers, counters, and motor protection.

Uploaded by

ameer kannan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 30

PCI_NSTI

Lecture 10:
Programmable Logic
Controllers
PLC’s Are ...
• Similar to a Microcontroller:
– Microprocessor Based
– Onboard Memory for Storing Programs
– Special Programming Language: Ladder Logic
– Input/Output Ports
PLC’s Are...
• Dissimilar to Microcontrollers:
– Intended for Industrial Applications
– I/O Designed to interface with Control Relays
– Emphasis on Maximum Reliability
PLC’s
• Widely Applied in Every Industry
• Were Developed to Simplify the
Implementation of Control Automation
Systems in Plants and Assembly Lines
• Designed to Minimize the Number of
Control Relays in a Process and Maximize
the Ways Relays can be Used
• First Applied to Automobile Industry in the
Late 1960’s
• Flexible, Reliable and Low Cost
PLC Components
I/O Modules
• Input Modules: Input Signals can be AC or
DC, Analog or Digital
• Output Modules: Outputs are either AC or
DC Analog Signals (Although it is possible
to ‘Construct’ Digital Outputs)
• Modern PLC’s have Expansion Ports to
Increase the Number of Available Inputs
and Outputs
Examples of I/O Signals
• Inputs:
– Pushbutton (Energizing or Grounding an Input)
– Relay Contact Output
– DC Voltage Level
– Digital Logic Signal (+5V or 0 V, etc)
• Outputs:
– 24 V ac
– 120 V ac
– 120 Vdc
– etcetera
PLC’s Use Ladder Logic
• Ladder Logic Diagrams Provide a Method
to Symbolically Show How Relay Control
Schemes are Implemented
• Relay Contacts and Coils, Inputs and
Outputs lie on “Rungs” Between the
Positive and Ground Rails
Example of Ladder Diagram
Relays
• In General, Relays Transform a Control
Signal into a Control Action
• Relays Provide:
– Isolation Between Input and Output
– Leverage (Small Signal Can Control Large
Action)
– Automation (Minimize Human Interaction with
a Control Process)
Relay Components
Basic Relay Symbols
Relay Applications
• Relays can be Designed to Perform Many
Functions
– Detect Out of Limit Conditions on Voltages
and Currents
– Start Motors
– Prevent Motors from Over Heating
– Control Assembly Lines
– Adjust Lighting
PLC Timers and Motor
Protection
Industrial Communications
• RS-422 (EIA 422): Asynchronous Serial
Communications , similar in many respects
to RS-232
• Faster (up to 100 Kbps) than RS-232
• Better Noise Immunity
– Differential (Balanced signal) Protocol
– Makes use of Twisted Pair lines - 1 pair for
transmit, one pair for receive (4 Lines vs. 3)
EIA-422 Basics
• Can be 1 Master Transmitter feeding up to
10 Slave Receivers
• Can be Peer-to-Peer, like RS-232
• Data is sent and received via Differential
Ports - Common Mode Rejection (Noise
common to both inputs is attenuated)
• Twisted Pair also reduces EMI at low cost
Common Mode Rejection
EIA 485 (RS-485)
• More Modern, Faster and Flexible (supports TCP/IP)
• Since it uses a differential balanced line over twisted
pair (like EIA-422), it can span relatively large
distances (up to 4000 feet or just over 1200 metres).
• In contrast to EIA-422, which has a single driver
circuit which cannot be switched off, EIA-485 drives
need to be put in transmit mode explicitly by
asserting a signal to the driver. This allows EIA-485
to implement linear topologies using only two lines.
IEEE 802.3 (Ethernet)
• Star Topology (Hub and spokes)
• Standard for computer networks since the
1990’s
• Becoming more and more popular in
Industrial settings
• Uses twisted pair data cables terminated in
8P8C (sometimes incorrectly called RJ45)
modular plugs, wired according to TIA/EIA-
568-B
Twisted Pair Cables
• Twisting a pair of wires that act as a communication
channel will:
– Minimize the loop area between the pair (minimize the
self-inductance and capacitance)
– Which in turn tends to cancel out much of the
electromagnetic interference from external sources and
crosstalk from adjacent pairs
– Improve the efficiency of the channel
PLC Special Features
• Time Delay Relays
• Counter Relays
• Special Functions
• User Defined Functions
• Special Bits
Time Delay Relays
• When TD Relay Pick-Up Coil is Energized,
a Delay is Initiated
• Normally Open Contacts Wait to Close
until Delay is Completed
• Normally Closed Contacts Wait to Open
until Delay is Completed
• Very Useful for Creating a Sequence of
Control Events
Time Delay Symbol
• Can be Constructed With or Without a
Reset Input
Making Use of Delays
• Delay Motor Start While Alarm Sounds for
Safety
Counters
• Counter Relays must “Count” a pre-
determined number of events before
changing contact status
• Can Count Up (UpCounter) or Count Down
(DownCounter)
• e.g. An UpCounter is set to 8 and is
programmed to detect every occurrence of a
5 Volt pulse. When it has detected 8 such
occurrences, the NO Contacts close and the
NC contacts open.
• Great for making Real-Time Clocks, etc
Special Functions
• Modern PLCs can perform many Math and
Logic Functions without additional Ladder
Logic Programming
– Differentiation, Integration
– +, -, *, /
– Boolean Logic Functions (AND, NOT, OR)
– Master Control Functions (Reset, etc)
Motor Protection
• Essential Part of Motor Control
• Protect against:
– Under Voltage
– Under Frequency (AC Machines Only)
– Over Current
– Over Heating
– Over Speed
– Over Load
Motor Protection Schemes
• Incorporated Directly in Ladder Logic
Control Schemes
References
• Skvarenina/DeWitt, Electrical Power and
Controls, Pearson-Prentice Hall, 2004

You might also like