Scribd Logo
Upload

Welcome to Scribd!

  • 837 views

    Problem Set Shear Stress and Bearing Stress

    Uploaded by

    Sheva Mae R. Octobre
    1) Shearing stress is caused by forces parallel to the area resisting the force, unlike tensile and compressive stresses which are caused by forces perpendicular to the area. 2) Bearing stress is the contact pressure between separate bodies in contact, such as the pressure between a bolt and plate at a joint. It differs from compressive stress which is an internal stress. 3) The document provides examples of calculating shearing stress, bearing stress, minimum plate thickness, and bolt/rivet diameter required to support given loads without exceeding specified stress limits.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Problem Set Shear Stress and Bearing Stress

    Uploaded by

    Sheva Mae R. Octobre
    837 views11 pages
    1) Shearing stress is caused by forces parallel to the area resisting the force, unlike tensile and compressive stresses which are caused by forces perpendicular to the area. 2) Bearing stress is the contact pressure between separate bodies in contact, such as the pressure between a bolt and plate at a joint. It differs from compressive stress which is an internal stress. 3) The document provides examples of calculating shearing stress, bearing stress, minimum plate thickness, and bolt/rivet diameter required to support given loads without exceeding specified stress limits.

    Original Title

    Problem-Set-Shear-Stress-and-Bearing-Stress (1).pptx

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Shearing stress is caused by forces parallel to the area resisting the force, unlike tensile and compressive stresses which are caused by forces perpendicular to the area. 2) Bearing stress is the contact pressure between separate bodies in contact, such as the pressure between a bolt and plate at a joint. It differs from compressive stress which is an internal stress. 3) The document provides examples of calculating shearing stress, bearing stress, minimum plate thickness, and bolt/rivet diameter required to support given loads without exceeding specified stress limits.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    837 views11 pages

    Problem Set Shear Stress and Bearing Stress

    Uploaded by

    Sheva Mae R. Octobre
    1) Shearing stress is caused by forces parallel to the area resisting the force, unlike tensile and compressive stresses which are caused by forces perpendicular to the area. 2) Bearing stress is the contact pressure between separate bodies in contact, such as the pressure between a bolt and plate at a joint. It differs from compressive stress which is an internal stress. 3) The document provides examples of calculating shearing stress, bearing stress, minimum plate thickness, and bolt/rivet diameter required to support given loads without exceeding specified stress limits.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 11

    Mechanics of

    Deformable
    Bodies
    Forces parallel to the area resisting the force cause
    shearing stress. It differs to tensile and compressive stresses,
    which are caused by forces perpendicular to the area on which
    they act. Shearing stress is also known as tangential stress.
    Shearing
    Stress
    τ=V
    A
    Shearing Stress
    What force is required to
    punch a 20-mm-diameter
    hole in a plate that is 25 mm
    PROBLEM 8 thick? The shear strength is
    350 MN/m2.
    As in Fig. 1-11c, a hole is to be
    punched out of a plate having
    a shearing strength of 40 ksi.
    PROBLEM 9 The compressive stress in the
    punch is limited to 50 ksi. (a)
    Compute the maximum
    thickness of plate in which a
    hole 2.5 inches in diameter
    can be punched. (b) If the
    plate is 0.25 inch thick,
    determine the diameter of
    the smallest hole that can be
    punched.
    Find the smallest diameter
    bolt that can be used in the
    clevis if P = 400 kN. The
    PROBLEM 10 shearing strength of the bolt
    is 300 MPa.
    ⊙ Bearing stress is the contact pressure between the separate
    bodies. It differs from compressive stress, as it is an internal
    stress caused by compressive forces. The bearing stress is the
    pressure experience by the second surface due to the action
    Bearing from the first surface (i.e. the pressure between bolt and plate
    Stress at a joint).
    σb = Pb = Pb
    Ab dt
    Bearing Stress
    In Fig. 1-12, assume that a 20-
    mm-diameter rivet joins the
    plates that are each 110 mm
    PROBLEM 11 wide. The allowable stresses are
    120 MPa for bearing in the plate
    material and 60 MPa for shearing
    of rivet. Determine (a) the
    minimum thickness of each
    plate; and (b) the largest average
    tensile stress in the plates.
    The lap joint shown in Fig. P-126
    is fastened by four ¾-in.-
    diameter rivets. Calculate the
    PROBLEM 12 maximum safe load P that can be
    applied if the shearing stress in
    the rivets is limited to 14 ksi and
    the bearing stress in the plates is
    limited to 18 ksi. Assume the
    applied load is uniformly
    distributed among the four rivets.
    In the clevis shown, find the
    minimum bolt diameter and the
    minimum thickness of each yoke
    PROBLEM 13 that will support a load P=14kips
    without exceeding a shearing
    stress of 12ksi and a bearing
    stress pf 20ksi.

    You might also like