Scribd
Upload
385 views

Computer System and Network Configurations

Managing Your Network Configuring Your Network Networks Designing Your Network Rolling Out Your Network II. True or False 1. A LAN connects computers within a single geographical location, such as one office building, office suite, or home. 2. WANs span different cities or even countries, using phone lines or satellite links. 3. Peer-to-peer networks typically don’t have dedicated servers. 4. The network configuration phase involves creating network accounts and shared disk areas. 5. Tuning up your LAN means customizing it for better speed and performance. True True True True True

Uploaded by

Mark Anthony Nieva Rafallo
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
385 views

Computer System and Network Configurations

Managing Your Network Configuring Your Network Networks Designing Your Network Rolling Out Your Network II. True or False 1. A LAN connects computers within a single geographical location, such as one office building, office suite, or home. 2. WANs span different cities or even countries, using phone lines or satellite links. 3. Peer-to-peer networks typically don’t have dedicated servers. 4. The network configuration phase involves creating network accounts and shared disk areas. 5. Tuning up your LAN means customizing it for better speed and performance. True True True True True

Uploaded by

Mark Anthony Nieva Rafallo
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

Grade 9 ICT

Computer
System and
Network
Configurations

Computer Hardware Servicing


Computer Networks
Networks are collections of computers, software,
and hardware that are all connected to help their
users work together. A network connects computers
by means of cabling systems, specialized software,
and devices that manage data traffic. A network
enables users to share files and resources, such as
printers, as well as send messages electronically
(e-mail) to each other.
The most common networks are Local Area
Networks or LANs for short. A LAN connects
computers within a single geographical location,
such as one office building, office suite, or home.
By contrast, Wide Area Networks (WANs) span
different cities or even countries, using phone
lines or satellite links.
Network System Configuration
All networks go through roughly the
same steps in terms of design, rollout,
configuration, and management.
Designing Your Network
Plan on the design phase to take anywhere from one to
three working days, depending on how much help you have
ad how big your network is.
Here are the key tasks:

–Settle on a peer to peer network or a client server


network.
–Pick your network system software.
–Pick a network language.
–Figure out what hardware you need.
–Decide on what degree of information security you need.
–Choose software and hardware solutions to handle day-to-
day management chores.
Rolling Out Your Network
Rolling out your network requires the following steps:
▪ Run and test network cables.
▪ Install the server or servers if you’re setting up a
client/server network. (If you are setting up a peer-to-peer
network, you typically don’t have to worry about any
dedicated servers.)
▪ Set up the workstation hardware.
▪ Plug in and cable the Network Interface Cards (NICs – these
connect the network to the LAN).
▪ Install the hub or hubs (if you are using twisted-pair cable).
▪ Install printers.
▪ Load up the server software (the NOS, or Network
Operating System) if your network is a client/server type.
▪ Install the workstation software.
▪ Install modem hardware for remote dial-up (if you want the
users to be able to dial into the network).
▪ Install the programs you want to run (application software).
Configuring Your Network
Network configuration means customizing the network for
your own use.
▪ Creating network accounts for your users (names, passwords, and
groups).
▪ Creating areas on shared disk drives for users to share data files.
▪ Creating areas on shared disk drives for users to share programs
(unless everyone runs programs from their own computer).
▪ Setting up print queues (the software that lets users share
networked printers).
▪ Installing network support on user workstations, so they can
"talk" to your network.
Managing Your Network
The work you do right after your LAN is up and running and
configured can save you huge amounts of time in the coming
months.
▪ Mapping your network for easier management and
troubleshooting.
▪ Setting up appropriate security measures to protect against
accidental and intentional harm.
▪ Tuning up your LAN so that you get the best possible speed
from it.
▪ Creating company standards for adding hardware and software,
so you don’t have nagging compatibility problems later.
▪ Putting backup systems in place so that you have copies of data
and programs if your hardware fails.
▪ Installing some monitoring and diagnostic software so that you
can check on your network’s health and get an early warning of
impleading problems.
▪ Figuring out how you plan to handle troubleshooting –
educating your LAN administrator, setting up a support
contract with a software vendor, and so on.
Question???
Assignment
Define the following. Write your answer on ½
sheet of paper.
1. Peer-to-peer network
2. Client server network
Quiz
I. Matching type
1. The work you do right after your LAN is up and running and
configured can save you huge amounts of time in the coming
months.
2. It means customizing the network for your own use.
3. Collections of computers, software, and hardware that are all
connected to help their users work together.
4. Plan on the design phase to take anywhere from one to three
working days, depending on how much help you have ad how
big your network is.
5. “Run and test network cables” is the fist step in________________.

You might also like