Scribd
Upload
23 views

Congestion Control Algorithms

The document compares the performance of TCP, RCP+, and a proposed RCP++ congestion control protocol in hybrid networks. It discusses network congestion and different congestion control protocols. An experiment is conducted to analyze throughput, dropped packets, end-to-end delay, packet delivery ratio, and network routing load of the three protocols in heterogeneous network configurations consisting of both wired and wireless networks. Key terms discussed include TCP, RCP, RCP+, RCP++, and congestion in hybrid networks.

Uploaded by

prathvi poojari
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
23 views

Congestion Control Algorithms

The document compares the performance of TCP, RCP+, and a proposed RCP++ congestion control protocol in hybrid networks. It discusses network congestion and different congestion control protocols. An experiment is conducted to analyze throughput, dropped packets, end-to-end delay, packet delivery ratio, and network routing load of the three protocols in heterogeneous network configurations consisting of both wired and wireless networks. Key terms discussed include TCP, RCP, RCP+, RCP++, and congestion in hybrid networks.

Uploaded by

prathvi poojari
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Performance Comparison of

Different Congestion Control


Protocol In Hybrid Network

Prathvi Poojari

Shubham Pawar
Bilal Mulla

Supervisor
Mrs. Sakshi More
ABSTRACT

• Congestion control in computer network is an important issue to be


addressed. Various congestion protocols are used for avoiding congestion in
network..

• Widely implemented topology in Internet is Heterogeneous networks which


are a combination of wired andwireless networks.

• Some of the most known and recent protocols developed to provide faster
and lighter congestion control are TCP (Transmission Control Protocol) and
the Rate Control Protocol (RCP).

• This paper provides performance comparison of TCP, RCP+ and our


proposed algorithm RCP++ in hybrid network.
INTRODUCTION

• In this experiment we have to analyze the performance of TCP,


RCP+ and proposed model RCP++. This experiment aims at studying
the effects of hybrid (wired and wireless) networks on TCP, RCP+
and RCP++ by the researchers of this experiment in presence of
heterogeneous network configurations.

• This experiment covers maximum of the performance parameters


like Throughput, Dropped Packet, End to End Delay, Packet
Delivery Ratio and Network Routing Load.
NETWORK CONGESTION
•Indata networking and queueing theory, network congestion
occurs when a link or node is carrying so much data that its quality of
service deteriorates
•A consequence of these latter two is that incremental increases in
offered load lead either only to small increase in network throughput,
or to an actual reduction in network throughput.
•Congestioncollapse is a condition which a packet switched computer
network can reach, when little or no useful communication is
happening due to congestion.
CONGESTION CONTROL
•Congestion control concerns controlling traffic entry into a telecommunication
network.
•So as to avoid congestive collapse by attempting to avoid oversubscription of
any of the processing or link capabilities of the intermediate nodes and
networks and taking resource reducing steps, such as reducing the rate of
sending packets. A consequence of these latter two is that incremental
increases in offered load lead either only to small increase in network
throughput, or to an actual reduction in network throughput.
•Itshould not be confused with flow control, which prevents the sender from
overwhelming the receiver.
• GENERAL TERMS
• TCP- Transmission Control Protocol, RCP – Rate Control Protocol

• Keywords
• TCP, RCP, RCP+, RCP++, Congestion. Hybrid
Transmission Control Protocol (TCP)
Rate Control Protocol (RCP)
CONCLUSION
• Tomeasure the actual strength of the
hybrid network, different parameters
considered here are Throughput, Packet
Delivery Ratio and Delay.We made
thorough study of all the congestion control
protocols that we are going to use in our
project.Thus we also learned how to use
NS-2 software.

You might also like