Automatic Drainage Control System Using Arduino
Automatic Drainage Control System Using Arduino
A Project Seminar on
“ARDUINO BASED UNDERGROUND DRAINAGE AND
MANHOLE MONITORING SYSTEM FOR CITIES”
Presented By
Jnaneshwari S 1GC15EC036
Meghana C S 1GC16EC405
Poojashree S 1GC16EC410
Shubha K S 1GC15EC076
Under the Guidance of
Mr. Mahadev S
Assistant Professor, Dept. of ECE, GCE, Ramanagaram -562159
CONTENTS
Introduction
Objective
Literature Survey
Problem Identification
Proposed System
Methodology
Hardware and Software Requirements
Advantages and Disadvantages
Applications
Expected Outcomes
References
Introduction
Most of the cities adopted the Underground drainage
system and it is the duty of Municipal Corporation to
maintain cleanliness of the cities.
If the Drainage maintenance is not proper or the drainage
gets blocked then it will create many problems.
Problems such as the pure water gets contaminated with
drainage water and infectious diseases may get spread,
traffic jam may happen, the environment becomes dirty.
This Manhole maintenance by human control is very
difficult because environment is poor and it is difficult to
go inside the manhole for inspecting states of the
manholes.
Suppose if there should be a facility which would be there
in Municipal corporation that the Officials come to know
immediately after blocking of drainage in which area and
the exact place where it is blocked and it also informs if
the manhole lid is open.
The above facilities can be provided by monitoring
manholes using sensors. These sensors sends information
via transmitter which is located in that area to the
corresponding managing station.
Also this model identify the poisonous gas in the manhole
that effect the Manhole Cleaner.
Objective
The main objective of this project is to keep the city clean,
safety and healthy.
If the drainage maintenance is not proper it will create
problem for routine life, traffic may get jammed infectious
diseases may get spread and there is a chance of
occurrence of accidents.
The vital consideration of this design are low cost, low
maintenance, fast development, and high number of
sensors, long life time and high quality of services.
Literature Survey
Monitoring Smart City Applications using Raspberry
PI Based on IOT
Authors: Prof. S.A.Shaikh 1, Suvarna A. Sonawane.
Description: The Smart city is the development goal to
improve good management and faster development of the
city. Latest facility to implement the concept of smart city
use IOT concept by which easy wireless communication is
possible. The system consist of sensors, collect different
types of data from sensors and transfer to the Raspberry Pi3
controller. The acquired output from the controller is sent to
the control room through the E- mail and also display on the
personal computer.
Automated IOT for Underground Drainage and
Manhole Monitoring System for Metropolitan Cities.
Author: Muragesh S. K1 and Santhosha Rao
Description: The IoT consists of real life objects,
communication devices attached to sensor networks in order
to provide communication and automated actions between
real world and information world. IoT came into existence
because, without human interaction, computers were able to
access data from objects and devices. Sensor Network is a
key enabler for IoT paradigm. It represents the
implementation and design function of an UDMS for IoT
applications. The proposed model provides a system for
monitoring the water level and atmospheric temperature and
pressure inside a manhole and to check whether a manhole
lid is open.
Problem Identification
Advantages
Wireless Remote Monitoring
Underground drainage system to keep the city clean
Low cost and low maintenance
Fast deployment
High quality of service
Long life-time and
User friendly
Disadvantages
Weak network
Applications